Manitou Dorado Pro Suspension ForkThe legendary Dorado Pro is back and well-equipped to turn the suspension world upside down with many of Manitou's finest technologies. Developed specifically for the rigours of modern downhill riding, this model features high-quality 6000 series aluminium legs with a carbon outer and carbon upper tubes delivering a fantastic combination of stiffness, durability and low weight performance. Its updated stiffer chassis is also paired with a sealed version of the TPC+ damper and an improved Dorado Air Spring with IRT volume adjuster. These technologies combined into one ultimate platform provides more than enough tunability to satisfy any savvy suspension tuner while being so easy to adjust that every rider can dial in their fork with ease.Carbon Fibre and Inverted DesignAfter its debut 11 years ago, the Dorado Pro is once again dressed in carbon. In addition to looking amazing, the upper carbon tubes allow 238g in weight savings compared to alloy along with increased stiffness. Inverted forks provide an incredibly smooth and consistent feel due to the constant lubrication of the bushings and seals. Inverted forks also provide a major increase in fore-aft stiffness with much longer bushing overlap compared to traditional fork designs while maintaining torsional compliance which provides more control over rough trail sections.Dorado Air Spring and TSR Trail Side ReliefDorado Air spring systems contain a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. TSR Bleed Buttons allow excess pressure built up in the outer legs of the fork to be equalised with a simple press of the button located on the top cap.TPC+ Twin-Piston Cartridge DamperTPC+ is a velocity and position-dependent damping circuit that maintains light damping through small bumps when the fork is high in the travel. As the fork compresses deeper in the travel the secondary TPC+ circuit engages and increases the damping force for added support and bottom-out prevention. Additionally, an independent Hydraulic Bottom-out circuit further increases the damping force in the final 30mm of travel to soften deep travel events and prevent hard bottom out.Features: Outer Leg Material: Carbon Leg Material: 6000 Series Aluminium Leg Diameter: 37mm Use: Downhill Axle: 110x20mm Boost Thru Axle Steerer Diameter: 1 1/8" Straight Spring: Dorado Air with Infinite Rate Tune (IRT) Compression Damping: Sealed Cartridge TPC+ with Hydraulic Bottom Out (HBO) Rebound Damping: Sealed Cartridge TPC Crown: Forged Travel: 203mm Adjustments: Air, IRT, Rebound, HS, and LS Compression Offset: 47mm Flat Crown (27.5"); 57mm Drop Crown (29") Ride Height: 582mm (27.5"); 602mm (29") Brake Post Mount: 203mm (223 Max) Max Tyre Size: 67mm Extras: Threaded TSR Buttons Options: Fender (sold separately) E-Bike Compatible: No Weight: 2970gTechnologies: Carbon Fibre Legs and the 37mm Chassis: Result in the stiffest and lightest Dorado to date. The carbon pro chassis is 27% stiffer than the previous 36mm version and 238g lighter than the new 37mm Expert version. Inverted Design: Provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. Dorado Air Spring System: Contains a unique balancing valve that equalizes the positive and negative air chambers during the air fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts. IRT (Infinite Rate Tune): Allows for advanced spring tuning by independently adjusting air pressures in the beginning and end stroke. IRT technology creates a secondary positive air spring that affects only the middle to end stroke of the fork. This allows the main air spring to be set to lower pressures for improved small bump sensitivity while maintaining mid-stroke support and moderate to aggressive end-stroke ramp-up. Sealed TPC+: Is a velocity and position-dependent damping circuit that maintains light damping thru small bumps when the fork is high in its travel. As the fork compresses deeper in the travel the secondary TPC+ circuit engages and increased the damping force for added support and bottom-out prevention. Additionally, an independent Hydraulic Bottom-out circuit further increases the damping force in the final 30mm of travel to soften deep travel events and prevent hard bottom out. The new cartridge design with spring-backed IFP fully seals damper oil for the most consistent damping on long demanding DH runs. Spring-backed IFP has improved performance during extreme riding, unlike a bladder, an IFP pressurizes the oil at the initial stroke eliminating any cavitation for the most consistent damping. Fits Both 29" and 27.5" Wheels: Markings on the outer legs indicate the proper clamping point for ideal axle to crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. Two Crown Options: Are available with this fork (select from the drop-down menu). The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. TSR Bleed buttons: Allow you to release excess pressures built up in the outer legs of your fork with a simple tap of the button. This keeps your fork smooth and supple all day long.Manufacturer's Part Numbers: 191-37419-A101 Black 27.5" Short Offset 191-37419-A201 Black 29" Long OffsetBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou R7 Expert Mountain Bike Suspension ForkThis mountain bike (MTB) fork features a tough straight wall aluminium leg construction, which allows it to handle all of the intensity that's associated with training and competing. Coming equipped with an Expert Air spring, VTT compression damping and In-leg adjustable TPC rebound damping, this model allows riders to dial in their ideal riding preferences to match their style or the terrain conditions. Its adjustable air, rebound and three-position compression (Open, Trail and Lock), means that you'll enjoy a more rider-tuned feel with increased performance and reliability, as you tackle every off-road challenge that comes your way.Expert Air SpringThis trail-ready model features the Manitou Expert Air spring system, which contains a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel.Variable Terrain Tune - 3-Position Compression AdjustWhen developing the VTT Pro damper, Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that chokes off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support. This is achieved through independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted we can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain.ChassisWhen developing the chassis of this Manitou fork, the goal was to find the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch, Manitou is able to position the arch further away from the axle. The lower tyre clearance behind the fork relative to the centre of the axle allows for a shorter arch which yields 13% increased stiffness compared to a forward arch fork of the equivalent weight. Because of this, Manitou is able to use 32mm stanchions to save weight, while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Hollow Bore Gloss Axle: 15x110mm Hexlock Use: MTB, XC Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: Expert Air Compression Damping: VTT Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, 3-position Compression (Open, Trail, Lock) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 68mm 77mm (27.5"+); 68mm (29") Offset: 37mm (27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") E-Pac: No Weight: 1789g (27.5"); 1812g (27.5+/29")Manufacturer's Part Numbers: 191-36972-A001 Black 27.5" x 100mm 37mm 191-36972-A002 Black 27.5" x 120mm 37mm 191-36976-A001 Black 27.5+/29" x 100mm 44mm 191-36976-A002 Black 27.5+/29" x 120mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou R7 Expert Mountain Bike Suspension ForkThis mountain bike (MTB) fork features a tough straight wall aluminium leg construction, which allows it to handle all of the intensity that's associated with training and competing. Coming equipped with an Expert Air spring, VTT compression damping and In-leg adjustable TPC rebound damping, this model allows riders to dial in their ideal riding preferences to match their style or the terrain conditions. Its adjustable air, rebound and three-position compression (Open, Trail and Lock), means that you'll enjoy a more rider-tuned feel with increased performance and reliability, as you tackle every off-road challenge that comes your way.Expert Air SpringThis trail-ready model features the Manitou Expert Air spring system, which contains a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel.Variable Terrain Tune - 3-Position Compression AdjustWhen developing the VTT Pro damper, Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that chokes off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support. This is achieved through independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted we can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain.ChassisWhen developing the chassis of this Manitou fork, the goal was to find the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch, Manitou is able to position the arch further away from the axle. The lower tyre clearance behind the fork relative to the centre of the axle allows for a shorter arch which yields 13% increased stiffness compared to a forward arch fork of the equivalent weight. Because of this, Manitou is able to use 32mm stanchions to save weight, while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Hollow Bore Gloss Axle: 15x110mm Hexlock Use: MTB, XC Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: Expert Air Compression Damping: VTT Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, 3-position Compression (Open, Trail, Lock) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 68mm 77mm (27.5"+); 68mm (29") Offset: 37mm (27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") E-Pac: No Weight: 1789g (27.5"); 1812g (27.5+/29")Manufacturer's Part Numbers: 191-36972-A001 Black 27.5" x 100mm 37mm 191-36972-A002 Black 27.5" x 120mm 37mm 191-36976-A001 Black 27.5+/29" x 100mm 44mm 191-36976-A002 Black 27.5+/29" x 120mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou R7 Expert Mountain Bike Suspension ForkThis mountain bike (MTB) fork features a tough straight wall aluminium leg construction, which allows it to handle all of the intensity that's associated with training and competing. Coming equipped with an Expert Air spring, VTT compression damping and In-leg adjustable TPC rebound damping, this model allows riders to dial in their ideal riding preferences to match their style or the terrain conditions. Its adjustable air, rebound and three-position compression (Open, Trail and Lock), means that you'll enjoy a more rider-tuned feel with increased performance and reliability, as you tackle every off-road challenge that comes your way.Expert Air SpringThis trail-ready model features the Manitou Expert Air spring system, which contains a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel.Variable Terrain Tune - 3-Position Compression AdjustWhen developing the VTT Pro damper, Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that chokes off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support. This is achieved through independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted we can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain.ChassisWhen developing the chassis of this Manitou fork, the goal was to find the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch, Manitou is able to position the arch further away from the axle. The lower tyre clearance behind the fork relative to the centre of the axle allows for a shorter arch which yields 13% increased stiffness compared to a forward arch fork of the equivalent weight. Because of this, Manitou is able to use 32mm stanchions to save weight, while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Hollow Bore Gloss Axle: 15x110mm Hexlock Use: MTB, XC Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: Expert Air Compression Damping: VTT Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, 3-position Compression (Open, Trail, Lock) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 68mm 77mm (27.5"+); 68mm (29") Offset: 37mm (27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") E-Pac: No Weight: 1789g (27.5"); 1812g (27.5+/29")Manufacturer's Part Numbers: 191-36972-A001 Black 27.5" x 100mm 37mm 191-36972-A002 Black 27.5" x 120mm 37mm 191-36976-A001 Black 27.5+/29" x 100mm 44mm 191-36976-A002 Black 27.5+/29" x 120mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou R7 Expert Mountain Bike Suspension ForkThis mountain bike (MTB) fork features a tough straight wall aluminium leg construction, which allows it to handle all of the intensity that's associated with training and competing. Coming equipped with an Expert Air spring, VTT compression damping and In-leg adjustable TPC rebound damping, this model allows riders to dial in their ideal riding preferences to match their style or the terrain conditions. Its adjustable air, rebound and three-position compression (Open, Trail and Lock), means that you'll enjoy a more rider-tuned feel with increased performance and reliability, as you tackle every off-road challenge that comes your way.Expert Air SpringThis trail-ready model features the Manitou Expert Air spring system, which contains a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel.Variable Terrain Tune - 3-Position Compression AdjustWhen developing the VTT Pro damper, Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that chokes off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support. This is achieved through independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted we can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain.ChassisWhen developing the chassis of this Manitou fork, the goal was to find the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch, Manitou is able to position the arch further away from the axle. The lower tyre clearance behind the fork relative to the centre of the axle allows for a shorter arch which yields 13% increased stiffness compared to a forward arch fork of the equivalent weight. Because of this, Manitou is able to use 32mm stanchions to save weight, while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Hollow Bore Gloss Axle: 15x110mm Hexlock Use: MTB, XC Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: Expert Air Compression Damping: VTT Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, 3-position Compression (Open, Trail, Lock) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 68mm 77mm (27.5"+); 68mm (29") Offset: 37mm (27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") E-Pac: No Weight: 1789g (27.5"); 1812g (27.5+/29")Manufacturer's Part Numbers: 191-36972-A001 Black 27.5" x 100mm 37mm 191-36972-A002 Black 27.5" x 120mm 37mm 191-36976-A001 Black 27.5+/29" x 100mm 44mm 191-36976-A002 Black 27.5+/29" x 120mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
◌Marzocchi Bomber Z1 Coil Mountain Bike ForksThis Mountain Bike Fork from Marzocchi features a tried and tested modern 36mm chassis, ideal for withstanding all the challenges from tough mountain bike (MTB) trails. Benefiting from Marzocchi's GRIP damper, it replaces the air-spring with a highly advanced coil system, for a lightweight spring that's made from tempered silicon Chromoly (CrMo) for exceptional durability and control, no matter what the terrain brings.Adjustable MTB Coil ForkReady for fast-paced adventures, this MTB fork is kitted out with an adjustment noise reduction system. This allows you to benefit from almost silent operation and external preload adjustment, which enables you to fine-tune the sag and suspension firmness. Compression and rebound can also be fine-tuned to set the fork up to suit your riding preferences and the trail conditions. One final highlight is the Marzochhi Bomber Z1 Coil Fork allows for alternative spring weights or inner spacers to be installed. This means you can customise its travel and performance even further.Features:Use: MTBFork Material: AluminiumFork Travel: 170mmChassis: 36mmAxle Included: YesAxle Type: 15 Quick Release x 110Damping: GRIP (compression + rebound)Lockout: YesOffset: 44mmSpring: Tempered Silicone-Chromium SteelSteerer: 1.5" tapered AluminiumStanchions: 36mm black AnodisedRake: 44mmWeight: 2.525g (starting weight complete fork)Manufacturer Part Numbers:Black 29", Travel 170mm: MAZ-912-01-091Black 29", Travel 160mm: MAZ-912-01-096Black 27.5", Travel 180mm: MAZ-912-01-099Black 27.5", Travel 170mm: MAZ-912-01-100Red 27.5", Travel 180mm: MAZ-912-01-101Red 29", Travel 170mm: MAZ-912-01-097Buy Marzocchi Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
◌Marzocchi Bomber Z1 Coil Mountain Bike ForksThis Mountain Bike Fork from Marzocchi features a tried and tested modern 36mm chassis, ideal for withstanding all the challenges from tough mountain bike (MTB) trails. Benefiting from Marzocchi's GRIP damper, it replaces the air-spring with a highly advanced coil system, for a lightweight spring that's made from tempered silicon Chromoly (CrMo) for exceptional durability and control, no matter what the terrain brings.Adjustable MTB Coil ForkReady for fast-paced adventures, this MTB fork is kitted out with an adjustment noise reduction system. This allows you to benefit from almost silent operation and external preload adjustment, which enables you to fine-tune the sag and suspension firmness. Compression and rebound can also be fine-tuned to set the fork up to suit your riding preferences and the trail conditions. One final highlight is the Marzochhi Bomber Z1 Coil Fork allows for alternative spring weights or inner spacers to be installed. This means you can customise its travel and performance even further.Features:Use: MTBFork Material: AluminiumFork Travel: 170mmChassis: 36mmAxle Included: YesAxle Type: 15 Quick Release x 110Damping: GRIP (compression + rebound)Lockout: YesOffset: 44mmSpring: Tempered Silicone-Chromium SteelSteerer: 1.5" tapered AluminiumStanchions: 36mm black AnodisedRake: 44mmWeight: 2.525g (starting weight complete fork)Manufacturer Part Numbers:Black 29", Travel 170mm: MAZ-912-01-091Black 29", Travel 160mm: MAZ-912-01-096Black 27.5", Travel 180mm: MAZ-912-01-099Black 27.5", Travel 170mm: MAZ-912-01-100Red 27.5", Travel 180mm: MAZ-912-01-101Red 29", Travel 170mm: MAZ-912-01-097Buy Marzocchi Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Ribbon Air ForkFeaturing 35mm stanchions, combined with MRP's renowned technologies, this mountain bike (MTB) fork is ready for the rigours of enduro racing and all mountain riding terrain conditions. This model is equipped with Boost axle spacing, which gives it additional stiffness and strength as you tackle unpredictable, mixed terrains, while also ensuring smooth, effective and consistent handling as you weave between the trails. MRP Ribbon forks have received updates including the ChocoLUXE internals and Norglide Bushings, providing less stiction and better-than-ever performance.Enduro Forks with Adjustable Air Spring SystemMRP's goal in designing the Ribbon was seemingly impossible: building on the success of the heralded Stage, create a fork with higher performance, more adjustability, more features, all at a significantly lower weight. Those incredible demands meant that the brand had to reimagine elements like casting design, reconfigure damper architecture, and completely retarget performance goals. The result is not just the best fork they've ever produced, they've classed it as the new industry benchmark.With other features like the highly tuneable FulFill air-spring, low-pressure IFP damper, PSST pressure relief valves, and Outcast arch design and the acclaimed Ramp Control technology, this is the enduro fork to have. Features: Stanchions: 35mm Use: All mountain, Enduro Axle: 15x110mm Boost QR axle standard; Bolt-on optional (available separately) Air Spring System: FulFill independent positive & negative chamber system External Adjustments: Positive/negative air-spring pressure, 8-position low-speed compression, 16-position Ramp Control, and rebound Internal Adjustments: Travel (in 5mm increments) Brake Mount: 180mm, post mount Fork Travel/Offset: Multiple options available to select Axle To Crown Length: 27.5" Option with 150mm travel: 542mm; 27.5" Option with 160mm travel: 552mm; 27.5+/29" Option with 150mm travel: 562mm; 27.5+/29" Option with 160mm travel: 572mm Weight: 27.5" Option: 1.88kg; 27.5+/29" Option: 1.95kgTechnologies: ChocoLUXE Internals: ChocoLUXE is a proprietary material utilised in the damper plug, damper seal, damper IFP, and damper support. It's highly dimensionally stable, meaning that parts made from it are more consistent overall and less susceptible to change with exposure to temperature swings or humidity. It is also extremely low friction. Norglide Bushings: Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. They're exceptionally smooth and durable. Reduced Friction: In addition to part updates, MRP also continued to refine its processes. In whole, these part and process changes have resulted in a 37% reduction in friction compared to first-generation Ribbon forks. FullFill air-spring system with independently adjustable positive and negative air-chambers for greater tunability. New EssenTTial twin-tube, bladder-free damper utilizing a low-pressure IFP. Outcast arch design with forward-facing weight reliefs to mitigate mud build up. PSST pressure-relief valves that quickly and easily bleed off excess pressure in the lowers caused by elevation and temperature changes. "Boost" spacing and 35mm stanchions.Manufacturer's Part Numbers: FKMRR7151 Black 27.5" 150mm 44mm FKMRR7152 Black 27.5" 160mm 44mm FKMRR7164 Black 29"/27.5"+ 150mm 46mm FKMRR7165 Black 29"/27.5"+ 160mm 46mm Buy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Ribbon Air ForkFeaturing 35mm stanchions, combined with MRP's renowned technologies, this mountain bike (MTB) fork is ready for the rigours of enduro racing and all mountain riding terrain conditions. This model is equipped with Boost axle spacing, which gives it additional stiffness and strength as you tackle unpredictable, mixed terrains, while also ensuring smooth, effective and consistent handling as you weave between the trails. MRP Ribbon forks have received updates including the ChocoLUXE internals and Norglide Bushings, providing less stiction and better-than-ever performance.Enduro Forks with Adjustable Air Spring SystemMRP's goal in designing the Ribbon was seemingly impossible: building on the success of the heralded Stage, create a fork with higher performance, more adjustability, more features, all at a significantly lower weight. Those incredible demands meant that the brand had to reimagine elements like casting design, reconfigure damper architecture, and completely retarget performance goals. The result is not just the best fork they've ever produced, they've classed it as the new industry benchmark.With other features like the highly tuneable FulFill air-spring, low-pressure IFP damper, PSST pressure relief valves, and Outcast arch design and the acclaimed Ramp Control technology, this is the enduro fork to have. Features: Stanchions: 35mm Use: All mountain, Enduro Axle: 15x110mm Boost QR axle standard; Bolt-on optional (available separately) Air Spring System: FulFill independent positive & negative chamber system External Adjustments: Positive/negative air-spring pressure, 8-position low-speed compression, 16-position Ramp Control, and rebound Internal Adjustments: Travel (in 5mm increments) Brake Mount: 180mm, post mount Fork Travel/Offset: Multiple options available to select Axle To Crown Length: 27.5" Option with 150mm travel: 542mm; 27.5" Option with 160mm travel: 552mm; 27.5+/29" Option with 150mm travel: 562mm; 27.5+/29" Option with 160mm travel: 572mm Weight: 27.5" Option: 1.88kg; 27.5+/29" Option: 1.95kgTechnologies: ChocoLUXE Internals: ChocoLUXE is a proprietary material utilised in the damper plug, damper seal, damper IFP, and damper support. It's highly dimensionally stable, meaning that parts made from it are more consistent overall and less susceptible to change with exposure to temperature swings or humidity. It is also extremely low friction. Norglide Bushings: Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. They're exceptionally smooth and durable. Reduced Friction: In addition to part updates, MRP also continued to refine its processes. In whole, these part and process changes have resulted in a 37% reduction in friction compared to first-generation Ribbon forks. FullFill air-spring system with independently adjustable positive and negative air-chambers for greater tunability. New EssenTTial twin-tube, bladder-free damper utilizing a low-pressure IFP. Outcast arch design with forward-facing weight reliefs to mitigate mud build up. PSST pressure-relief valves that quickly and easily bleed off excess pressure in the lowers caused by elevation and temperature changes. "Boost" spacing and 35mm stanchions.Manufacturer's Part Numbers: FKMRR7151 Black 27.5" 150mm 44mm FKMRR7152 Black 27.5" 160mm 44mm FKMRR7164 Black 29"/27.5"+ 150mm 46mm FKMRR7165 Black 29"/27.5"+ 160mm 46mm Buy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Ribbon Air ForkFeaturing 35mm stanchions, combined with MRP's renowned technologies, this mountain bike (MTB) fork is ready for the rigours of enduro racing and all mountain riding terrain conditions. This model is equipped with Boost axle spacing, which gives it additional stiffness and strength as you tackle unpredictable, mixed terrains, while also ensuring smooth, effective and consistent handling as you weave between the trails. MRP Ribbon forks have received updates including the ChocoLUXE internals and Norglide Bushings, providing less stiction and better-than-ever performance.Enduro Forks with Adjustable Air Spring SystemMRP's goal in designing the Ribbon was seemingly impossible: building on the success of the heralded Stage, create a fork with higher performance, more adjustability, more features, all at a significantly lower weight. Those incredible demands meant that the brand had to reimagine elements like casting design, reconfigure damper architecture, and completely retarget performance goals. The result is not just the best fork they've ever produced, they've classed it as the new industry benchmark.With other features like the highly tuneable FulFill air-spring, low-pressure IFP damper, PSST pressure relief valves, and Outcast arch design and the acclaimed Ramp Control technology, this is the enduro fork to have. Features: Stanchions: 35mm Use: All mountain, Enduro Axle: 15x110mm Boost QR axle standard; Bolt-on optional (available separately) Air Spring System: FulFill independent positive & negative chamber system External Adjustments: Positive/negative air-spring pressure, 8-position low-speed compression, 16-position Ramp Control, and rebound Internal Adjustments: Travel (in 5mm increments) Brake Mount: 180mm, post mount Fork Travel/Offset: Multiple options available to select Axle To Crown Length: 27.5" Option with 150mm travel: 542mm; 27.5" Option with 160mm travel: 552mm; 27.5+/29" Option with 150mm travel: 562mm; 27.5+/29" Option with 160mm travel: 572mm Weight: 27.5" Option: 1.88kg; 27.5+/29" Option: 1.95kgTechnologies: ChocoLUXE Internals: ChocoLUXE is a proprietary material utilised in the damper plug, damper seal, damper IFP, and damper support. It's highly dimensionally stable, meaning that parts made from it are more consistent overall and less susceptible to change with exposure to temperature swings or humidity. It is also extremely low friction. Norglide Bushings: Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. They're exceptionally smooth and durable. Reduced Friction: In addition to part updates, MRP also continued to refine its processes. In whole, these part and process changes have resulted in a 37% reduction in friction compared to first-generation Ribbon forks. FullFill air-spring system with independently adjustable positive and negative air-chambers for greater tunability. New EssenTTial twin-tube, bladder-free damper utilizing a low-pressure IFP. Outcast arch design with forward-facing weight reliefs to mitigate mud build up. PSST pressure-relief valves that quickly and easily bleed off excess pressure in the lowers caused by elevation and temperature changes. "Boost" spacing and 35mm stanchions.Manufacturer's Part Numbers: FKMRR7151 Black 27.5" 150mm 44mm FKMRR7152 Black 27.5" 160mm 44mm FKMRR7164 Black 29"/27.5"+ 150mm 46mm FKMRR7165 Black 29"/27.5"+ 160mm 46mm Buy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Ribbon Air ForkFeaturing 35mm stanchions, combined with MRP's renowned technologies, this mountain bike (MTB) fork is ready for the rigours of enduro racing and all mountain riding terrain conditions. This model is equipped with Boost axle spacing, which gives it additional stiffness and strength as you tackle unpredictable, mixed terrains, while also ensuring smooth, effective and consistent handling as you weave between the trails. MRP Ribbon forks have received updates including the ChocoLUXE internals and Norglide Bushings, providing less stiction and better-than-ever performance.Enduro Forks with Adjustable Air Spring SystemMRP's goal in designing the Ribbon was seemingly impossible: building on the success of the heralded Stage, create a fork with higher performance, more adjustability, more features, all at a significantly lower weight. Those incredible demands meant that the brand had to reimagine elements like casting design, reconfigure damper architecture, and completely retarget performance goals. The result is not just the best fork they've ever produced, they've classed it as the new industry benchmark.With other features like the highly tuneable FulFill air-spring, low-pressure IFP damper, PSST pressure relief valves, and Outcast arch design and the acclaimed Ramp Control technology, this is the enduro fork to have. Features: Stanchions: 35mm Use: All mountain, Enduro Axle: 15x110mm Boost QR axle standard; Bolt-on optional (available separately) Air Spring System: FulFill independent positive & negative chamber system External Adjustments: Positive/negative air-spring pressure, 8-position low-speed compression, 16-position Ramp Control, and rebound Internal Adjustments: Travel (in 5mm increments) Brake Mount: 180mm, post mount Fork Travel/Offset: Multiple options available to select Axle To Crown Length: 27.5" Option with 150mm travel: 542mm; 27.5" Option with 160mm travel: 552mm; 27.5+/29" Option with 150mm travel: 562mm; 27.5+/29" Option with 160mm travel: 572mm Weight: 27.5" Option: 1.88kg; 27.5+/29" Option: 1.95kgTechnologies: ChocoLUXE Internals: ChocoLUXE is a proprietary material utilised in the damper plug, damper seal, damper IFP, and damper support. It's highly dimensionally stable, meaning that parts made from it are more consistent overall and less susceptible to change with exposure to temperature swings or humidity. It is also extremely low friction. Norglide Bushings: Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. They're exceptionally smooth and durable. Reduced Friction: In addition to part updates, MRP also continued to refine its processes. In whole, these part and process changes have resulted in a 37% reduction in friction compared to first-generation Ribbon forks. FullFill air-spring system with independently adjustable positive and negative air-chambers for greater tunability. New EssenTTial twin-tube, bladder-free damper utilizing a low-pressure IFP. Outcast arch design with forward-facing weight reliefs to mitigate mud build up. PSST pressure-relief valves that quickly and easily bleed off excess pressure in the lowers caused by elevation and temperature changes. "Boost" spacing and 35mm stanchions.Manufacturer's Part Numbers: FKMRR7151 Black 27.5" 150mm 44mm FKMRR7152 Black 27.5" 160mm 44mm FKMRR7164 Black 29"/27.5"+ 150mm 46mm FKMRR7165 Black 29"/27.5"+ 160mm 46mm Buy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Ribbon Coil Mountain Bike ForkComing equipped with 35mm stanchions along with MRP's finest technologies, this trail-ready mountain bike (MTB) fork gives all mountain and enduro racers exceptional front end suspension performance on the most rigorous of terrain conditions. Coming kitted out with Boost axle spacing, this model provides a stronger and stiffer construction, as well as more effective and precise handling as you tackle rock gardens, tree roots and debris. MRP Ribbon coil forks have also received updates including the ChocoLUXE internals and Norglide Bushings, which deliver less stiction and better-than-ever performance.Enduro MTB Fork with Coil SpringThe Ribbon Coil gives you the spring tunability and stroke control previously found only with air, while giving you the supple linear spring curve, lower friction, longer service life and consistent feel that you get with a coil spring. Coil aficionados have dreamt of a fork that combines these advantages with the latest in chassis and damper technology. MRP has delivered with the Ribbon Coil.Also including tried and tested features like the PSST pressure relief valves, bladder-free EssenTTial damper utilising a low-pressure IFP, Outcast arch design and the acclaimed Ramp Control technology, this is the hard-hitting enduro fork to have.Features: Stanchions: 35mm Use: All Mountain, Enduro Axle: 15x110mm Boost QR axle standard, Bolt-on optional (available separately) Steerer Diameter: 1 1/8-1.5" tapered Spring System: Coil Soft, medium & firm springs included External Adjustments: Preload, 8-position low-speed compression, 20-position Ramp Control, and rebound Brake Mount: 180mm, post mount Fork Travel/Offset: Multiple options available to select Axle to Crown Length: 27.5" Option with 150mm travel: 542mm; 27.5" Option with 160mm travel: 552mm; 27.5+/29" Option with 150mm travel: 562mm; 27.5+/29" Option with 160mm travel: 572mm Weight: 27.5" Option: 2.08kg; 27.5+/29" Option: 2.11kgTechnologies: ChocoLUXE Internals: ChocoLUXE is a proprietary material utilised in the damper plug, damper seal, damper IFP, and damper support. It's highly dimensionally stable, meaning that parts made from it are more consistent overall and less susceptible to change with exposure to temperature swings or humidity. It is also extremely low friction. Norglide Bushings: Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. They're exceptionally smooth and durable. Reduced Friction: In addition to part updates, MRP also continued to refine its processes. In whole, these part and process changes have resulted in a 37% reduction in friction compared to first-generation Ribbon forks. Travel-adjustable coil spring system with preload adjustment and Ramp Control technology. New EssenTTial twin-tube, bladder-free damper utilising a low-pressure IFP. Outcast arch design with forward-facing weight reliefs to mitigate mud build-up. PSST pressure-relief valves that quickly and easily bleed off excess pressure in the lowers caused by elevation and temperature changes. "Boost" spacing and 35mm stanchions.Manufacturer's Part Numbers: FKMRR7209 Black 29"/27.5"+ 160mm 46mm FKMRR7208 Black 29"/27.5"+ 150mm 46mm FKMRR7213 Black 27.5" 150mm 39mm FKMRR7214 Black 27.5" 160mm 39mmBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.