Fox Suspension 34 Float SC Factory Remote ForkIf you're serious about gaining a competitive advantage on the toughest cross country (XC) racing trails, the 34 Float SC Factory model is the ideal mountain bike (MTB) fork choice. Its Kashima coated stanchions ensure super-smooth travel to help you maintain your speed over tree roots, rock gardens and anything else the trail throws at you.Part of Fox Suspension's renowned Factory Series, this suspension fork is specifically tailored for the cross country (XC) racing with a build that's feature-packed and to exceed the demands of Factory-level riders. It's equipped with an updated chassis that's 15% stiffer than the 32 standard model as well as a revised arch shape that offers improved head tube clearance with shorter rakes. Developed from the ground up to deliver uncompromised XC racing performance, it's also kitted out with a Float EVOL air spring and a FIT4 3-Position damper for a high level of tuneability and control. Coming complete with a genuine Kashima upper tube coating that's slippery smooth and ultra-durable, this is a great choice of upgrade for dependable front-end suspension performance on the most demanding of racing conditions.XC Fork with Float EVOL Air SpringReturning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer.FIT4 3-Position DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tube Finish: Genuine Kashima Use: Cross Country (XC) Axle: Kabolt 110mm Boost Air Spring: Float EVOL air spring Damper: FIT4 3-Position Remote Push to Lock (PTL) Steerer Diameter: 1.5" tapered Wheel Size: 29" Max Tyre Size: 29x2.40" Rotor Size: 160mm direct Post Mount, Up to 180mm compatible Remote Compatible: Yes (sold separately) Offset: 44mm Weight: 1496g (starting weight)Technologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks, Low-speed rebound 10 clicks Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of materialBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Clarks CFR-06 Floating Rotor (180mm)Clarks have been striving to deliver quality products for over 60 years now. The brand is dedicated to innovation in materials and design. Riders who use Clarks products have complete confidence in their brakes and steering grip - both of which are pivotal to high performance.180mm floating style rotor. 6 rotor bolts.Buy Clarks Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Clarks PTFE Coated Inner Gear WireThis genuine Inner Gear Wire from Clarks is made from hard-wearing stainless-steel and suitable for use with all major gear systems. Coated with Polytetrafluoroethylene (PFTE), it offers exceptional durability for a quality that lasts. Features:Length: 2275mmCompatible: Road and Mountain Bike shifters (except Campagnolo)Buy Clarks Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Clarks CRF-06 Floating Rotor - 203mmClarks Floating Rotor - 203mmClarks have been striving to deliver quality products for over 60 years now. The brand is dedicated to innovation in materials and design. Riders who use Clarks products have complete confidence in their brakes and steering grip - both of which are pivotal to high performance.High Grade (420) Stainless steel braking surface with alloy (7075) inner. Supplied with 6 rotor bolts. Wavey design for improved modulation and heat dissipation. Weight 110g (160mm), 156g (180mm), 196g (203mm)Buy Clarks Floating Rotor from Chain Reaction Cycles, the World's Largest Online Bike Store.
Clarks CFR-13FA Floating Disc RotorA two-piece rotor for the most venturesome MTB riders, this Clarks effort minimises brake-generated heat without compromising on top stopping performance. Comprising of an alloy spider with a heat-resistant stainless steel brake track, both parts complement each other to prevent heat-warping under extreme braking pressures. Equipped with a built-in wear indicator and chamfered edges, this powerful and efficient disc rotor is the ideal addition to any hard-rising disc brake setup. Features Material: Spider: 7075 Alloy; Brake Track: Heat-resistant Stainless Steel Bike Compatibility: MTB, hybrid Diameter: 140mm Buy Clarks Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Clarks CFR-10FA Floating Disc Brake RotorWith a strong and lightweight 7075 alloy inner section and top-end stainless-steel braking area, the CFR-10FA Floating Disc Brake Rotor will help you to get the best from your road, mountain bike (MTB) or hybrid bike’s brakes. The alloy inner spider draws heat away from the braking surface to prevent the dreaded “brake fade” on long descents. Plus, Clarks has drilled 150 holes in the area that your brake’s pads contact, further reducing heat build-up and helping to disperse dirt and water too.Brake Rotor with Rounded EdgesThe braking surface on this rotor has a very round edge with very few recesses. Clarks made it like this so that the disc pads consistently make 100% contact with the disc no matter where they are applied. This drastically improves your overall braking power.Features:Material: Braking Surface: Stainless-Steel; Carrier: Aerospace Grade 7075 AlloyUse: Road, Mountain Bike (MTB), HybridMount Type: Standard 6-boltCompatibility: All Clarks mechanical and hydraulic disc brakes and other brands tooPrecision drilled braking band with 150 holes to encourage efficient heat dispersionResistant to warpingManufacturer's Part Number: CFR-10FAWeight: 160mm: 122g; 180mm: 144g; 203mm: 152gBuy Clarks Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Clarks CFR-06 Floating Rotor (180mm)Clarks have been striving to deliver quality products for over 60 years now. The brand is dedicated to innovation in materials and design. Riders who use Clarks products have complete confidence in their brakes and steering grip - both of which are pivotal to high performance.180mm floating style rotor. 6 rotor bolts.Buy Clarks Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Clarks CRF-06 Floating Rotor - 203mmClarks Floating Rotor - 203mmClarks have been striving to deliver quality products for over 60 years now. The brand is dedicated to innovation in materials and design. Riders who use Clarks products have complete confidence in their brakes and steering grip - both of which are pivotal to high performance.High Grade (420) Stainless steel braking surface with alloy (7075) inner. Supplied with 6 rotor bolts. Wavey design for improved modulation and heat dissipation. Weight 110g (160mm), 156g (180mm), 196g (203mm)Buy Clarks Floating Rotor from Chain Reaction Cycles, the World's Largest Online Bike Store.
Clarks CFR-10FA Floating Disc Brake RotorWith a strong and lightweight 7075 alloy inner section and top-end stainless-steel braking area, the CFR-10FA Floating Disc Brake Rotor will help you to get the best from your road, mountain bike (MTB) or hybrid bike’s brakes. The alloy inner spider draws heat away from the braking surface to prevent the dreaded “brake fade” on long descents. Plus, Clarks has drilled 150 holes in the area that your brake’s pads contact, further reducing heat build-up and helping to disperse dirt and water too.Brake Rotor with Rounded EdgesThe braking surface on this rotor has a very round edge with very few recesses. Clarks made it like this so that the disc pads consistently make 100% contact with the disc no matter where they are applied. This drastically improves your overall braking power.Features:Material: Braking Surface: Stainless-Steel; Carrier: Aerospace Grade 7075 AlloyUse: Road, Mountain Bike (MTB), HybridMount Type: Standard 6-boltCompatibility: All Clarks mechanical and hydraulic disc brakes and other brands tooPrecision drilled braking band with 150 holes to encourage efficient heat dispersionResistant to warpingManufacturer's Part Number: CFR-10FAWeight: 160mm: 122g; 180mm: 144g; 203mm: 152gBuy Clarks Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Clarks CFR-10FA Floating Disc Brake RotorWith a strong and lightweight 7075 alloy inner section and top-end stainless-steel braking area, the CFR-10FA Floating Disc Brake Rotor will help you to get the best from your road, mountain bike (MTB) or hybrid bike’s brakes. The alloy inner spider draws heat away from the braking surface to prevent the dreaded “brake fade” on long descents. Plus, Clarks has drilled 150 holes in the area that your brake’s pads contact, further reducing heat build-up and helping to disperse dirt and water too.Brake Rotor with Rounded EdgesThe braking surface on this rotor has a very round edge with very few recesses. Clarks made it like this so that the disc pads consistently make 100% contact with the disc no matter where they are applied. This drastically improves your overall braking power.Features:Material: Braking Surface: Stainless-Steel; Carrier: Aerospace Grade 7075 AlloyUse: Road, Mountain Bike (MTB), HybridMount Type: Standard 6-boltCompatibility: All Clarks mechanical and hydraulic disc brakes and other brands tooPrecision drilled braking band with 150 holes to encourage efficient heat dispersionResistant to warpingManufacturer's Part Number: CFR-10FAWeight: 160mm: 122g; 180mm: 144g; 203mm: 152gBuy Clarks Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano SH11 CleatsShimano SH11 Cleats are developed to work with Shimano SPD-SL pedals. With a tri-bolt attachment, these cleats will work with the traditional road shoe and offer a 6deg float.Key Features:Compatibility: SPD-SL pedalsFloat: 6°Nylon Resin CleatNon-Slip Rubber Base for Easier WalkingIncludes mounting hardwareBuy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Cane Creek 40-Series Zinc Coated Headset BearingMade from hard-wearing steel and boasting a zinc-plating to extend its lifespan, the 40-Series Headset Bearing delivers a super-smooth rotation for fine steering control that lasts. Ready to combine with your Cane Creek headset cups, this versatile bearing can be used for road or Mountain Bike (MTB) and operates consistently even in the wettest weather and harshest riding conditions.Features: Material: Zinc-plated SteelHeadset Type: Fully IntegratedHeadset Compatibility: Cane Creek 40 series headsets Use: Road, Mountain Bike (MTB) Steerer Compatibility: 1.1/8" straight steerersAvailable in various sizesSold individuallyPrecision engineered by Cane Creek in Fletcher, North CarolinaTechnologies:ZN40 Bearings: These bearings are corrosion-resistant zinc-coated, machined steel cartridge bearings with hardened steel balls, which vastly increases the longevity of the 40 series headsetsBuy Cane Creek Components from Chain Reaction Cycles, the World's Largest Online Bike Store.