Eliminate the guesswork out of fitting the star nutFits 1 inch and 1-1/8 inch steerer tubesSets the star nut to 15 mm depth and keeps it straightLong handle prevent pinched fingers
Key Features:Wire bead multipurpose compound city and trekking tyre,Innovative tread means low rolling resistance,Excellent water channelling and grip due to shoulder tread,27TPI,ColourBlack,Wheel Diameter26 inches.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 5)With their tough aluminium construction, this pack of aluminium chainring bolts and nuts is a great upgrade to replace your old or lost parts and to breathe new life back into your setup. They're are suitable for use on Wolf Tooth bolt-on Drop-Stop chainrings with through holes. Plus, they can also be used with non-Wolf Tooth branded single chainrings and those with a 110mm or 130mm bolt circle diameter (BCD).Wolf Tooth designed these bolts to be the best on the market. These single chainring optimised bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut, so no spanner is needed. These are 6mm long, so they work perfectly with any bolt-on single chainring that does not have threaded standoffs.Features:Material: 7075-T6 AluminiumSize: M8 x.75 x 5Torque Spec: 7-8 NM tightening torque with light grease on threads onlyCompatibility: Wolf Tooth bolt-on Drop-Stop chainrings with through holes, works with other brand's single chainrings as wellBolt Circle Diameter (BCD) Compatibility: 110mm or 130mmMade in the USAPart Numbers: Black: WT5CBCN06BLK; Blue: WT5CBCN06BLU; Gold: WT5CBCN06GLD; Green: WT5CBCN06GRN; Grey: WT5CBCN06GRY; Orange: WT5CBCN06ORG; Purple: WT5CBCN06PRP; Red: WT5CBCN06RED; Silver: WT5CBCN06SILWeight: 10gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:Material: special tool steel,Surface finish: blacken to standard DIN 50938,The threadless nut setter is used to install the star fangled nut found on 1" and 1-1/8" threadless headset systems. It is intended for both professionals and home users..
Key Features:Wire bead multipurpose compound city and trekking tyre,Innovative tread means low rolling resistance,Excellent water channelling and grip due to shoulder tread,27TPI,ColourBlack,Wheel Diameter 700c.
Thread the nut onto the TNS, insert into the fork stack, and tap it in with a hammer. Sets the starfangled nut to 15mm and keeps it straight. Long handle helps prevent pinched fingers.
Park Tool Threadless Nut Setter TNS-1The Threadless Nut Setter is used to install star-fangled nuts found on threadless headset systems. Thread the nut onto the TNS, insert into the fork stack, and tap it in with a hammer. Sets the starfangled nut to 15mm and keeps it straight. Long handle helps prevent pinched fingers.Features:The TNS-1 is for 1” and 1-1/8” headset systemsBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Genuine DVO spare parts.Compatible with: ONYX DC, Diamond Boost, Beryl, Diamond, Onyx SC, Sapphire D1, Sapphire Boost 29
Sometimes, the Mucky Nutz Face Fender doesn't quite offer enough protection from mud flying from your front wheel. Enter the Mucky Nutz MudGuard which is designed for bigger, closer coverage, while retaining the sleek look and easy fitting of the legendary Face Fender.Designed to offer better coverage with elongated, 3D shape and recessed bridge area for more tyre clearanceWide upper arm profile protects fork seals and stanchions from dirt & mudCompatible with most suspension forks and 26 , 27.5 & 29 wheel sizes and tyres up to 3 Incredibly easy to fit with supplied Velcro rol, just like the original Face FenderShort Mudguard is 400mm long, Long MudGuard is 600mm for additional coverageAs Mucky Nutz' first entry in the 3D fender market, they wanted to ensure they got it right. The MudGuard has been designed as a fully functional and sharp-looking piece of kit, that keep and mud and spray out of your face, even in the worst conditions. The MudGuard is compatible with most suspension forks, including Boost axle-spacing models and is suitable for 26 , 27.5 & 29 wheels and up to 3 tyres. Safe to say it has the ever-changing industry wheel/tyre size standards under control then! The Guard itself features a forward lip to minimise spray, along with a sharp trailing edge to cut cloggy soil away from your tyre. Despire this and the closer fit, the recessed bridge area means you'll still have plenty of tyre clearance. The wide upper arm profile is also designed to keep mud and dirt away from your fork seals and stanchions, keeping them cleaner and prolonging intervals between services. The MudGuard fits in seconds with the supplied Velcro roll, just like the original Face Fender. Another trait it shares with the Face Fender is the multitude of fastening slots, giving you a wide range of adjustment for different forks, as well as as the possibility of using it as a rear mudguard on some full suspension bikes. With the Short version weighing just 75g, the MudGuard is also super light. Offering excellent coverage and a versatile fitting system, the Mucky Nutz MudGuard is a worthy addition to their range for when you need maximum protection from mud & spray in the worst conditions.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 4)Constructed from tough and hard-wearing 7075-T6 aluminium, this pack 1X Chainring Bolts will hold your mountain bike's (MTB's) chainring securely as you're attacking the most challenging sections of the trails. Made in the USA, they have an M8 size and a 6mm thread length, making them perfect for use with Wolf Tooth’s “Drop Stop” unthreaded chainrings and many other brands too.Features: Material: 7075-T6 Aluminium Speed: Single speed (eg. single speed drivetrains and 1x10, 1x11, 1x12-Speed drivetrains) Size: M8 x.75 x 5 Thread Length: 6mm Compatibility: Wolf Tooth's bolt-on Drop-Stop chainrings with unthreaded holes, other brands too Torque: 7-8 NM tightening torque with light grease on threads only Made in the USA Weight: 8gManufacturer's Part Numbers: Black: WT4CBCN06BLK; Blue: WT4CBCN06BLU; Gold: WT4CBCN06GLD; Green: WT4CBCN06GRN; Grey: WT4CBCN06GRY; Orange: WT4CBCN06ORG; Purple: WT4CBCN06PRP; Red: WT4CBCN06RED; Silver: WT4CBCN06SIL; Nickel: WT4CBCN06NIBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 4)Constructed from tough and hard-wearing 7075-T6 aluminium, this pack 1X Chainring Bolts will hold your mountain bike's (MTB's) chainring securely as you're attacking the most challenging sections of the trails. Made in the USA, they have an M8 size and a 6mm thread length, making them perfect for use with Wolf Tooth’s “Drop Stop” unthreaded chainrings and many other brands too.Features: Material: 7075-T6 Aluminium Speed: Single speed (eg. single speed drivetrains and 1x10, 1x11, 1x12-Speed drivetrains) Size: M8 x.75 x 5 Thread Length: 6mm Compatibility: Wolf Tooth's bolt-on Drop-Stop chainrings with unthreaded holes, other brands too Torque: 7-8 NM tightening torque with light grease on threads only Made in the USA Weight: 8gManufacturer's Part Numbers: Black: WT4CBCN06BLK; Blue: WT4CBCN06BLU; Gold: WT4CBCN06GLD; Green: WT4CBCN06GRN; Grey: WT4CBCN06GRY; Orange: WT4CBCN06ORG; Purple: WT4CBCN06PRP; Red: WT4CBCN06RED; Silver: WT4CBCN06SIL; Nickel: WT4CBCN06NIBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 4)Constructed from tough and hard-wearing 7075-T6 aluminium, this pack 1X Chainring Bolts will hold your mountain bike's (MTB's) chainring securely as you're attacking the most challenging sections of the trails. Made in the USA, they have an M8 size and a 6mm thread length, making them perfect for use with Wolf Tooth’s “Drop Stop” unthreaded chainrings and many other brands too.Features: Material: 7075-T6 Aluminium Speed: Single speed (eg. single speed drivetrains and 1x10, 1x11, 1x12-Speed drivetrains) Size: M8 x.75 x 5 Thread Length: 6mm Compatibility: Wolf Tooth's bolt-on Drop-Stop chainrings with unthreaded holes, other brands too Torque: 7-8 NM tightening torque with light grease on threads only Made in the USA Weight: 8gManufacturer's Part Numbers: Black: WT4CBCN06BLK; Blue: WT4CBCN06BLU; Gold: WT4CBCN06GLD; Green: WT4CBCN06GRN; Grey: WT4CBCN06GRY; Orange: WT4CBCN06ORG; Purple: WT4CBCN06PRP; Red: WT4CBCN06RED; Silver: WT4CBCN06SIL; Nickel: WT4CBCN06NIBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.