Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Featuring extensive CNC machining to shave off excess material, this stem is specifically built to tackle the gnarliest of DH trails. Ultimate Strength and Stiffness Nukeproof has redesigned the four-bolt faceplate system to shave some weight whilst retaining strength to offer maximum security against bar slippage. The ultra-wide clamping area provides exceptional stiffness and security, and the direct mount attachment provides a clean finish when mounted to your dual crown DH forks.
Genuine Nukeproof replacement frame spare part.
Genuine Nukeproof replacement frame spare part.
This high-quality clear sticker set is precision cut to cover the essential points on your frame. It is designed to protect the paint from unsightly damage and rub during use. This kit is only designed to be fitted to the 2020-2022 Carbon Reactor models. It will not fit the Alloy models.
These high-quality shock bolts are compatible with the 2021-2022 Nukeproof Mega Alloy.
This high-quality clear sticker set is precision cut to cover the essential points on your frame. It is designed to protect the paint from unsightly damage and rub during use. This kit is only designed to be fitted to the 2020-2022 Alloy Reactor models. It will not fit the Carbon models.
This Reactor Horst Link Kit is for use with the 2020-2022 Nukeproof Reactor frame.
Silicon Gel lining ensures that the knee sleeve stays in the same position no matter how fierce your cadence is, preventing slippage and allowing you to focus on the trail ahead.