Nukeproof Thru Axle Front 15mmThis thru-axle is designed as a direct replacement for the standard thru-axles found in 15mm Rockshox Boost forks as well as most models of 15mm Boost Fox forks. It features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks.The axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it.All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Please Note: Not compatible with 2021 Fox 36mm / 38mm forks Diameter Axle Length Thread Pitch Thread Length RockShox 15mm Boost 158mm 1.5 10mm Fox 15mm Boost Not compatible with 2021 36mm / 38mm 155mm 1.5 13.5mm Click here for Nukeproof's technical information.Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving 6mm Hex head at both axle ends for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Front 15mmThis thru-axle is designed as a direct replacement for the standard thru-axles found in 15mm Rockshox Boost forks as well as most models of 15mm Boost Fox forks. It features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks.The axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it.All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Please Note: Not compatible with 2021 Fox 36mm / 38mm forks Diameter Axle Length Thread Pitch Thread Length RockShox 15mm Boost 158mm 1.5 10mm Fox 15mm Boost Not compatible with 2021 36mm / 38mm 155mm 1.5 13.5mm Click here for Nukeproof's technical information.Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving 6mm Hex head at both axle ends for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 RimThis MTB rim has gone through extensive testing, so you can benefit from its fantastic strength and smooth rolling performance on the toughest of rides. It features a 28mm internal diameter and it's constructed from a 6066 alloy, which makes it light enough for aggressive trail-riding as well as strong enough for DH. This rim can be setup tubeless by using tubeless tape and is for disc brake use only. Rim Size ERD Approx Weight 27.5" 560.9 470g 29" 598.9 500g Features: Rim Material: 6066 Alloy Use: MTB Rim Inner Width: 28mm Rim External Width: 32mm Drilling: 32 hole Rim Height: 18mm Join: Welded Tubeless Compatible: Yes - use 33mm tape Brake Type: Disc only Finish: Sandblasted Valve Type: Presta Single or Pair: SingleBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 RimThis MTB rim is constructed from a special blend of alloys, which give it a similar hardness to 7-series alloy but with the ductility and yield properties of a 6-series. This means that you'll benefit from the best of both worlds as you blast across the mountain. Nukeproof has also equipped this model with a micro-shotpeened and anodised finish, which gives it an extra layer of resistance against corrosion and wear. As a result, you'll enjoy being able to shred the trails in all weather conditions, without worrying about the elements damaging your gear.Nukeproof has ensured that their front and rear rim profiles are the same but due to the rear rim being more likely to take most of the hits, they have used a thicker sidewall for added strength. The front rim has a thinner sidewall, which allows for excellent weight savings and a perfect balance between strength and weight. If you want some extra security, or if you want to save some more weight, there is no problem using a pair of front or rear rims. Option ERD Weight 27.5" Front 554.5 460g +/- 5% 27.5" Rear 554.3 490g +/- 5% 29" Front 592.5 510g +/- 5% 29" Rear 592.3 540g +/- 5% Features: Rim Material: Alloy Nukeproof BlendFinish: Micro shotpeened and anodised Use: MTB Rim Inner Width: 30mmRim Outer Width: 35mmRim Height: 21.6mmJoint: SleevedTubeless Compatible: Yes, Use 33mm tapeDrilling: 32 holeBrake Type: Disc onlyValve Type: PrestaBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 RimThis MTB rim is constructed from a special blend of alloys, which give it a similar hardness to 7-series alloy but with the ductility and yield properties of a 6-series. This means that you'll benefit from the best of both worlds as you blast across the mountain. Nukeproof has also equipped this model with a micro-shotpeened and anodised finish, which gives it an extra layer of resistance against corrosion and wear. As a result, you'll enjoy being able to shred the trails in all weather conditions, without worrying about the elements damaging your gear.Nukeproof has ensured that their front and rear rim profiles are the same but due to the rear rim being more likely to take most of the hits, they have used a thicker sidewall for added strength. The front rim has a thinner sidewall, which allows for excellent weight savings and a perfect balance between strength and weight. If you want some extra security, or if you want to save some more weight, there is no problem using a pair of front or rear rims. Option ERD Weight 27.5" Front 554.5 460g +/- 5% 27.5" Rear 554.3 490g +/- 5% 29" Front 592.5 510g +/- 5% 29" Rear 592.3 540g +/- 5% Features: Rim Material: Alloy Nukeproof BlendFinish: Micro shotpeened and anodised Use: MTB Rim Inner Width: 30mmRim Outer Width: 35mmRim Height: 21.6mmJoint: SleevedTubeless Compatible: Yes, Use 33mm tapeDrilling: 32 holeBrake Type: Disc onlyValve Type: PrestaBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Universal Presta Tubeless Valves (Pair)This pair of tubeless valves from Nukeproof have been created to be compatible with tubeless tyre inserts. These valves benefit from a removable core, ensuring you can get the most airflow from your pump or cartridge. The head of these valves has also been designed to sit on top, enabling easier inflation and deflation. The custom cap has been specially designed and has an integrated core remover for removing and tightening the core without any additional tools. The nut has also been designed so that you can get a good grip on the flat edges to firmly tighten the valve on the rim.An O-ring is included and sits against the outside of the rim to prevent damage to the rim.How to InstallRemove valve cap and nut, insert valve through rim, fit o-ring to valve then thread nut on and tighten by hand.Features:Valve Type: PrestaIncludes: Integrated valve core remover cap, O-ring, removable coreEasy installationSold as a pairWeight: 12g per pairBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Universal Presta Tubeless Valves (Pair)This pair of tubeless valves from Nukeproof have been created to be compatible with tubeless tyre inserts. These valves benefit from a removable core, ensuring you can get the most airflow from your pump or cartridge. The head of these valves has also been designed to sit on top, enabling easier inflation and deflation. The custom cap has been specially designed and has an integrated core remover for removing and tightening the core without any additional tools. The nut has also been designed so that you can get a good grip on the flat edges to firmly tighten the valve on the rim.An O-ring is included and sits against the outside of the rim to prevent damage to the rim.How to InstallRemove valve cap and nut, insert valve through rim, fit o-ring to valve then thread nut on and tighten by hand.Features:Valve Type: PrestaIncludes: Integrated valve core remover cap, O-ring, removable coreEasy installationSold as a pairWeight: 12g per pairBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.