Search found 1947 items

Nukeproof Universal Presta Tubeless Valves - Pair Tyre Spares
  • £17.99
  • RRP £19.99
  • Saving you £10

Featuring an adapted head which allows the tyre insert to sit on top of the valve, the shape of the head allows for easy inflation and deflation. Each valve has a removable core allowing you to get maximum air flow from your tubeless pump or CO2 cartridge. The specially-designed custom cap features a core remover built in so you can remove & tighten the core without any additional tools. The nut has also been designed so that you can get a good grip on the flat edges to tighten the valve in the rim. An O-ring is also provided which sits against the outside of the rim and provides an airtight seal while preventing damage to the rim from the nut on the valve. How to Install Remove valve cap and nut, insert valve through rim, fit O-ring to valve then thread nut on and tighten by hand.

VIEW ITEM
Nukeproof Horizon CS Pedal Rebuild Kit Pedal Spares
  • £17.99
  • RRP £22.99
  • Saving you £22

If you want to restore your Horizon CS pedal's peformance to its original level, this genuine replacement Nukeproof rebuild kit is sure to do the job.

VIEW ITEM
Nukeproof Sam Hill Enduro Race Grip Oil Slick Bar Grips
  • £17.99
  • RRP £29.99
  • Saving you £40

Following on from the success of the Nukeproof A15 durometer Sam Hill Series Grips, which Sam rode to overall EWS victory in 2017, Sam asked Nukeproof to develop an even softer compound for long days on the bike riding the toughest Enduro stages in the world. These are Sam’s special edition oil slick clamp version. Perfect for Enduro Racing Extra Soft Compound Sam has always been particular about his setup and Nukeproof has taken great pride in developing no-nonsense, custom products for Sam with some innovation even coming from his motocross bike! Together, they have helped to produce World level products that everyone can use. These grips were first used by Sam in round 4 of the 2018 EWS where he took the win and has been using them ever since. After that race he described the compound as “extra extra soft, semi throttle durometer” and described the grips as “pretty comfortable little things”. With comments like that we knew we were onto a winner with these grips.

VIEW ITEM
Nukeproof Horizon QR Seat Clamp - Grey - 34.9mm}, Grey
  • £17.99
  • RRP £19.99
  • Saving you £10

Nukeproof Horizon QR Seat ClampProviding a no-compromise, reliable and lightweight design that's also aesthetically pleasing, this mountain bike (MTB) seat clamp is fully equipped for long days in the saddle. Designed and developed by Nukeproof's in-house engineers, it features a CNC-machined 6061 aluminium build, which removes all unnecessary material so you can benefit from a super lightweight QR clamp at 42g without compromising strength. Another highlight is its incorporated ergonomic QR lever allows for on-the-fly tool-free saddle height changes. A CNC stainless steel barrel, stainless steel bolt, anodised finish and laser etched graphics ensure your clamp will stay fresh and hold your seatpost securely.The clamp is a universal design but has been designed to fit perfectly with Nukeproof frames to ensure a seamless gap-free fit between the clamp and the frame.Features: Clamp Material: 6061 Aluminium CNC-machined Barrel Material: Stainless Steel Finish: Laser-etched graphics Use: All Mountain (AM), Cross Country (XC), Downhill (DH), Freeride (FR) Ergonomic QR Lever Weight: 42gBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Nukeproof Horizon QR Seat Clamp - Grey - 31.8mm}, Grey
  • £17.99
  • RRP £19.99
  • Saving you £10

Nukeproof Horizon QR Seat ClampProviding a no-compromise, reliable and lightweight design that's also aesthetically pleasing, this mountain bike (MTB) seat clamp is fully equipped for long days in the saddle. Designed and developed by Nukeproof's in-house engineers, it features a CNC-machined 6061 aluminium build, which removes all unnecessary material so you can benefit from a super lightweight QR clamp at 42g without compromising strength. Another highlight is its incorporated ergonomic QR lever allows for on-the-fly tool-free saddle height changes. A CNC stainless steel barrel, stainless steel bolt, anodised finish and laser etched graphics ensure your clamp will stay fresh and hold your seatpost securely.The clamp is a universal design but has been designed to fit perfectly with Nukeproof frames to ensure a seamless gap-free fit between the clamp and the frame.Features: Clamp Material: 6061 Aluminium CNC-machined Barrel Material: Stainless Steel Finish: Laser-etched graphics Use: All Mountain (AM), Cross Country (XC), Downhill (DH), Freeride (FR) Ergonomic QR Lever Weight: 42gBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Nukeproof Thru Axle Rear 12mm - Black - White - 180mm Axle 13mm Thread, Black - White
  • £17.99

Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle.   Diameter  Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Nukeproof Mega AM MTB Bottom Swinglink Axle Kit
  • £17.99
  • RRP £19.99
  • Saving you £10

Nukeproof Mega AM MTB Bottom Swinglink Axle KitFull replacement Nukeproof Mega AM Bottom Swinglink Axle Kit. Features: 2x Countersunk M6 Bolts. 2x Machined Bearing Caps. 2x Bearing Spacers. 1x Axle. 1x Compression Sleeve. Compatible with the Nukeproof Mega AM Frame. Buy Nukeproof Frame Spares from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Nukeproof Snap Mountain Bike Maxle Dropout - Drive Side}
  • £17.99
  • RRP £19.99
  • Saving you £10

Nukeproof Snap Maxle DropoutNukeproof precision engineered replacement Maxle dropout designed specifically to hold a 135mm Maxle in the 2011 Snap frame. Tough durable construction with recesses to reduce excess material without compromising structural integrity.Features: Precision CNC Machined 6061 Alloy Maxle: 135mm Non drive side: 70g Drive side: 62gBuy Nukeproof Frame Spares from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Nukeproof Snap Mountain Bike Maxle Dropout - Non Drive Side}
  • £17.99
  • RRP £19.99
  • Saving you £10

Nukeproof Snap Maxle DropoutNukeproof precision engineered replacement Maxle dropout designed specifically to hold a 135mm Maxle in the 2011 Snap frame. Tough durable construction with recesses to reduce excess material without compromising structural integrity.Features: Precision CNC Machined 6061 Alloy Maxle: 135mm Non drive side: 70g Drive side: 62gBuy Nukeproof Frame Spares from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Nukeproof Snap Mountain Bike Vertical Dropout - Non Drive Side}
  • £17.99
  • RRP £19.99
  • Saving you £10

Nukeproof Snap Vertical DropoutNukeproof precision engineered replacement Vertical Dropout designed specifically to hold a 135mm axle in the 2011/12 Snap frame. Tough durable construction with recesses to reduce excess material without compromising structural integrity.Features:Material: Precision CNC Machined 6061 AlloyAxle diameter: 10mmAxle spacing: 135mmBuy Nukeproof Frame Spares from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Nukeproof Snap Mountain Bike Syntace Dropout - Non Drive Side}
  • £17.99
  • RRP £19.99
  • Saving you £10

Nukeproof Snap Syntace Dropout Nukeproof precision engineered replacement Syntace Dropout designed specifically to hold a 142mm axle in the 2011 Snap frame. Tough durable construction with recesses to reduce excess material without compromising structural integrity. Features: Precision CNC Machined 6061 Alloy Axle width: 12mm Axle spacing: 142mm Replacement Syntace DropoutBuy Nukeproof Frame Spares from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Nukeproof Thru Axle Rear 12mm - Black - White - 174mm Axle 16mm Thread, Black - White
  • £17.99

Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle.   Diameter  Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
expand_less