Well-equipped for fast and intense trail riding, this full suspension mountain bike (MTB) frame features a high-quality aluminium build that's specifically developed for the most demanding of rides. Nukeproof has put this model through a hydroforming and triple-butting process to ensure maximum strength and durability as you carve your way around the mountain. In addition, it is kitted out with a RockShox Super Deluxe Coil Ultimate DH RC rear shock that provides smooth and consistent rear end suspension performance as you charge from trail to trail. Another highlight is its comfortable geometry that includes internal cable routing for a clean, sleek finish. “It makes me want to race some World Cups again (Sam Hill)". Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world’s fastest racers. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were: - Simplify the design, to drop the weight and increase the front triangle stiffness. - More progressive leverage rate to increase the mid stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride. Structurally the most obvious change is an all-new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent’s rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time. Trail-Ready Full Suspension Alloy MTB Frame The suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse. The Dissent platform was originally conceived by Nukeproof's engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, the brand created something much better than expected, and the prototype won on its international debut at Crankworx festival’s Garbanzo Downhill race with Sam Hill. It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent frame now offers riders the choice of four main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate. The main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider! Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you’re riding, your height or riding style. The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157mm x 12mm rear axle to keep things stable at the rear. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Size Options: S/M/L/XL Fork Travel: 200mm Axle to Crown: 581mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm BB: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Dissent 275 Alloy, 200mm Travel Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (S=300LBS/M=350LBS/L=400LBS /XL=450LBS SPRING) Headset: Nukeproof, 49IITS Custom-tuned rear shock configuration Internal cable routing Enduro Bearings Threaded 83mm BB Boost 157mm rear axle spacing 3D contoured frame protection Three-stage Dissent linkage Four-position adjustable linkage progression chip system Three-position adjustable chainstay length Weight: 5.03kgs/11lbs
All set for day-long trail riding adventures, this mountain bike (MTB) frame is specifically designed for kid's who want to progress into the world of mountain bike riding. It features a high-quality 6061 triple-butted aluminium build, which makes this frame more than capable of handling all the knocks and bumps associated with your kid practising and perfecting their skill. With its comfortable geometry, 20" wheel size and Kevlar chainstay protector, this is a great choice of upgrade for building confidence, wherever their next ride takes them. 20" Kid's MTB Frame The Cub-Scout 20” Race is not just another kids bike: taking inspiration from Nukeproof's award-winning Scout adult hardtail range, the Cub-Scout 20” has been designed from the ground-up as a proper mini-hardtail mountain bike. It has been designed to allow kids to learn the ropes of riding, inspire confidence on the trails and act as the perfect platform for progression. Developed and tested with the help of the brand's own children, Nukeproof have created a class-leading lightweight kids bike range to inspire and nurture budding future World Cup or EWS winners! The range of Cub-Scout Hardtail frames are available in 20”, 24” or 26” options; meaning that there should be a Cub-Scout to suit kids of all sizes from aged 5 and up. Each frame features a lightweight custom butted 6061 Alloy frameset with bang up to date long, low and slack kids specific geometry. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 80mm Axle to Crown: 385mm Fork Offset: 38mm Wheels Size: 20" Max Tyre Size: 2.6" Sizing: One Size Headtube: 44mm Semi-Integrated Headset: ZS44-28.6 - T2 / EX44/40 – B5 (For Tapered Steerer fork) Seatpost: 27.2mm Seat Clamp: 31.8mm BB: Threaded 68mm BSA Rear Hub: 142x12mm Rear Axle: M12*1.5 Thread x168mm (Thread Length 17mm) Brake Mount: 160mm Direct Post Protection: Kevlar Chainstay Protector Weight: 1.8kg Specification: Frame: Nukeproof Cub-Scout 20”, custom triple butted hydro-formed 6061 Alloy Threaded 68mm BB 142mm rear axle spacing Kevlar chainstay protector Headset: Nukeproof, 44IETS
“It makes me want to race some World Cups again (Sam Hill)". Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world’s fastest racers. This full-suspension mountain bike (MTB) frame comes equipped with a robust 6061 aluminium construction that's been put through a hydroforming and triple-butting process for exceptional strength, durability and toughness as you hit your favourite trails. Specifically developed for riders who want to complete their mullet bike setup, this model also allows for a 29" front wheel and a 27.5" rear wheel to be fitted. Another benefit is its 157x12mm rear hub Boost axle spacing, which gives you stiff and responsive handling, wherever your next ride takes you. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were: - Simplify the design, to drop the weight and increase the front triangle stiffness. - More progressive leverage rate to increase the mid-stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride. Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent’s rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time. Lightweight Full Suspension MTB Frame with 200mm Travel The suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse. The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival’s Garbanzo Downhill race with Sam Hill. It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent Frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate. The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider! Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you’re riding, your height or riding style. The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157x12mm rear axle to keep things stable at the rear. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Size Options: M/L/XL Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm BB: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Dissent 297 Alloy, 200mm Travel Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (M=350LBS/L=400LBS /XL=450LBS SPRING) Headset: Nukeproof, 49IITS Custom-tuned rear shock configuration Internal cable routing Enduro Bearings Threaded 83mm BB Boost 157mm rear axle spacing 3D contoured frame protection Three-stage Dissent linkage 4 position adjustable linkage progression chip system 3 Position adjustable chainstay length Weight: 5.06kgs/11.1lbs
Specifically engineered for kid's who want to dive into the world of mountain bike (MTB) riding, this trail-ready frame comes kitted out with a robust aluminium build for an excellent balance of strength, durability and performance. Nukeproof has also put this model through its hydroforming and triple-butting process, which makes it more than capable of handling the demands of learning to ride the trails. Another highlight is its comfortable kid's specific geometry and its internal routing that allows for a dropper seatpost to be used. This makes it a great choice for young riders who want to perfect their skills, wherever their next adventure leads them. Trail-Ready 24" Kid's MTB Frame The Cub-Scout 24” Race is not just another kids bike: taking inspiration from Nukeproof's award-winning Scout adult hardtail range, the Cub-Scout 24” has been designed from the ground-up as a proper mini-hardtail mountain bike. It has been designed to allow kids to learn the ropes of riding, inspire confidence on the trails and act as the perfect platform for progression. Developed and tested with the help of the brand's own children, Nukeproof have created a class-leading lightweight kids bike range to inspire and nurture budding future World Cup or EWS winners! The range of Cub-Scout Hardtail frames are available in 20”, 24” or 26” options; meaning that there should be a Cub-Scout to suit kids of all sizes from aged 5 and up. Each frame features a lightweight custom butted 6061 Alloy frameset with bang up to date long, low and slack kids specific geometry. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 100mm Axle to Crown: 455mm Fork Offset: 38mm Wheels Size: 24" Max Tyre Size: 2.6" Sizing: One Size Headtube: 44/56mm Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 (For Tapered fork) Seatpost: 27.2mm (Internal Routing for Dropper Seatpost) Seat Clamp: 31.8mm BB: Threaded 68mm BSA Rear Hub: 142x12mm Rear Axle: M12*1.5 Thread x168mm (Thread Length 17mm) Chain Guide: ISCG05 Brake Mount: 160mm Direct Post Protection: Kevlar Chainstay Protector Weight: 2.7kg Specification: Frame: Nukeproof Cub-Scout 24”, custom triple butted hydro-formed 6061 Alloy Internal routing for Dropper Seatpost Threaded 68mm BB 142mm rear axle spacing Kevlar chainstay protector Headset: Nukeproof, 44/56IITS
Genuine replacement Nukeproof rebuild kit.
Whether it's before a ride or after a ride, spectating at a chilly winter DH race or even taking to the piste for some snowboard action, the Outland Beanie (Ltd Edition) has your head covered in comfy warmth. This is an essential bit of kit for any extreme sports lover getting out in the cold. Nukeproof Outland Range Fully designed and developed by the Nukeproof team in Belfast, they use the highest quality fabrics, great MTB inspired cut/fit and have features they wanted out of their ride apparel. The Outland range is pure trail inspired clothing, it fuses a relaxed fit and casual style and features both highly functional on the bike kit and casual wear for when you're enjoying some chill time.
Designed in-house by Nukeproof, these jockey wheels for SRAM and Shimano derailleurs offer a significant upgrade over the standard-fitted jockeys. Available in 10, 11 and 12 speed, Nukeproof has an option to suit most current derailleurs. Manufactured from hard-wearing lightweight polyoxymethylene plastic with a stainless-steel bearing, these jockey wheels are designed for durability and longer service life. The unique narrow-wide tooth profile design also allows for better shifting and reduced noise from your drivetrain. The Shimano options have a longer tooth on the top sprocket to improve shifting, the lower jockey wheel has a shorter tooth profile to reduce noise and increase efficiency. The SRAM options have a specific narrow-wide profile to perfectly fit the chain providing a crisper shift, smoother drive train and reduced noise. Click here to view and download the Nukeproof Jockey Wheel Guide.
Featuring a hard-wearing microfabric cover, this mountain bike (MTB) saddle is ready for handling the demands of downhill (DH), all mountain (AM) and cross country (XC) riding. Nukeproof has also equipped this model with tough chromoly (CrMo) steel rails for excellent durability, as they hold you securely to your seatpost. Engineered for versatility, it suits a wide range of rider shapes and sizes, making it an ideal choice of upgrade for any trail riding discipline.
This versatile bike cover is specifically designed to help protect your bike from damage while stored at home, in the back of the van or during uplifting. Nukeproof recognises that many riders have all suffered annoying damage when storing their bikes side by side, or when your riding buddies throw their bikes in a van or uplift beside yours. As a result, this universal bike cover was developed to offer reliable protection for road bikes as well as mountain bikes of all disciplines including 26/27.5/29" frames. Versatile Bike Cover with Foam Padding Produced from a durable PU protected 600D polyester, this cover is hard-wearing to ensure that your bike is protected. The cover is foam padded on the inside to cushion your bike when stored side by side and to absorb knocks. Another highlight is its four Velcro adjustable straps and its buckle that's located underneath, which also make sure the cover is a snug and secure fit around your bike. This cover will also help keep your vehicle clean post-ride if there are no local bike washing facilities. Easy Clean Interior Whether you're into road cycling or mountain bike (MTB) trail riding, this cover comes complete with a wipe-clean surface on the inside. This makes it easy to clean off any dirt or oil, while also providing water resistance.
We are offering selected pads in Sintered and organic compounds as packs of 4 pairs. Tested to the limit in all possible conditions by some of the world’s toughest and most demanding riders, Nukeproof disc pads will outperform the competition in wet weather or dry. No nonsense, High quality, High power braking with excellent modulation. Custom-manufactured in Taiwan to our exacting standards, The Nukeproof brake pad range now feature’s Organic, Semi-metallic and Sintered compounds mounted on steel backing plates for excellent heat dissipation and are available to fit all major brake systems. Installation guide can be found here