The Vector's distinctive lines are tailored to enhance the performance of a top-level race bike. The CrMo rails add strength to your saddle.
This front thru-axle features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks. The axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it. All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle. Please note: Not compatible with 2021 Fox 36mm / 38mm forks. Diameter Axle Length Thread Pitch Thread Length RockShox 15mm Boost 158mm 1.5 10mm Fox 15mm Boost Not compatible with 2021 36mm / 38mm 155mm 1.5 13.5mm Click here for Nukeproof’s technical information.
Tested to the limit in all possible conditions by some of the world’s toughest and most demanding riders, Nukeproof disc pads will outperform the competition in wet weather or dry. No nonsense, High quality, High power braking with excellent modulation. Custom-manufactured in Taiwan to Nukeproof's exact standards.
This rear thru-axle is equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame. The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it. Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm
Using lightweight 4-way stretch fabric the Blackline Shorts allow unrestricted mobility on the bike and are fast-wicking, quick-drying, and abrasion-resistant. The updates bring the Blackline short is line with Nukeproof's award-winning Blackline Trail Pant. The 3D 135gsm fabric is designed to offer the maximum surface area to wick and dry fast with laser cut venting on the front. The fabric is soft to touch but super durable and abrasive resistant against snags, offering protection against trail debris. They are built tough too – flat lock triple stitched inner leg hems provide strength while high-quality double popper buttons and quality YKK zips offer a bombproof feel. Locking the shorts firmly in place you'll find easy to use inner waist adjuster tabs plus non-slip silicon panels that grip your inner shorts or skin. Two mesh pocket bags with YKK zips gives space to stow essentials, with a D loop in the left pocket to lock in valuables, such as your car keys too. Quality rubberized printed graphics and Nukeproof branded trims complete this exceptional mountain bike short. The inclusion of a liner with the short makes them better than ever. A lightweight compression liner houses a 3D dual-density foam chamois liner to offer comfort on longer rides (3-5 hour). All seams are flatlock stitched for ultimate comfort in the saddle. At Nukeproof they have committed to using Bluesign® fabrics. This is a solution for sustainable textile production. It eliminates harmful substances right from the beginning of the manufacturing process and sets and controls standards for environmentally friendly and safe production. Nukeproof Blackline Fully designed and developed by The Nukeproof team in Belfast, they use the highest quality fabrics, great MTB inspired cut/fit and have all the features they wanted out of their ride apparel.
Using lightweight 4-way stretch fabric the Blackline Women's Shorts allow unrestricted mobility on the bike and are fast-wicking, quick-drying, and abrasion-resistant. The updates bring the Blackline short is line with Nukeproof's award-winning Blackline Trail Pant. The 3D 135gsm fabric is designed to offer the maximum surface area to wick and dry fast with laser cut venting on the front. The fabric is soft to touch but super durable and abrasive resistant against snags, offering protection against trail debris. They are built tough too – flat lock triple stitched inner leg hems provide strength while high-quality double popper buttons and quality YKK zips offer a bombproof feel. Locking the shorts firmly in place you'll find easy to use inner waist adjuster tabs plus non-slip silicon panels that grip your inner shorts or skin. Two mesh pocket bags with YKK zips gives space to stow essentials, with a D loop in the left pocket to lock in valuables, such as your car keys too. Quality rubberized printed graphics and Nukeproof branded trims complete this exceptional mountain bike short. The inclusion of a liner with the short makes them better than ever. A lightweight compression liner houses a 3D dual-density foam chamois liner to offer comfort on longer rides (3-5 hour). All seams are flatlock stitched for ultimate comfort in the saddle. At Nukeproof they have committed to using Bluesign® fabrics. This is a solution for sustainable textile production. It eliminates harmful substances right from the beginning of the manufacturing process and sets and controls standards for environmentally friendly and safe production. Nukeproof Blackline Fully designed and developed by The Nukeproof team in Belfast, they use the highest quality fabrics, great MTB inspired cut/fit and have all the features they wanted out of their ride apparel.
This E-bike chain guide for Shimano Steps features a backplate that's made from a lightweight alloy and it's available in six different colour options to complement your ride. Coming equipped with a durable nylon top guide with a co-moulded rubber inset, this model also offers a reduction in noise from your chain. Its top guide has also been extended to provide you with extra protection from your chain/chainring compared to the normal ISCG version. One final highlight is it's easy to install on most bikes without having to remove your cranks. The guide is supplied with various washers allowing you to fine-tune it to suit your chain line.
The Blackline Race Shorts blend two main material to offer protection and performance where required. The main body has minimal seams to reduce irritation on the skin. The one-piece super Lightweight (155gsm) stretch fabrics are used for the main body ensuring freedom of movement when you are putting the power down on the pedals. The outer body of the short is constructed using a slightly tougher Cordura Fabric to ensure durability and protection, resisting cuts and scrapes from trailside debris. Nukeproof add a DWR finish ensuring a sudden shower or muddy trails won't catch you out either. Triple stitching is used on the inner leg seams, adding strength and toughness, while other seams and the waistband are bonded for incredible comfort. Enabling you to achieve the perfect fit, you'll find simple and convenient inner waist adjusters, and these perfectly complement silicon grippers on the inner waist. The shorts are cut for on-bike performance with a raised rear yoke to provide protection and wicking. The Blackline race are designed to sit just over the knee pad area. Two zipper pockets plus an inner pocket with detachable goggle bag provides easily accessible storage space for essential kit. At Nukeproof they have committed to using Bluesign® fabrics. This is a solution for sustainable textile production. It eliminates harmful substances right from the beginning of the manufacturing process and sets and controls standards for environmentally friendly and safe production. Nukeproof Blackline Race Fully designed and developed by the Nukeproof team in Belfast, they use the highest quality fabrics, great MTB inspired cut/fit and have all the features they wanted out of their ride apparel. Blackline Race; No short cuts, no compromises, just pure performance designs with trail-ready technology.
This high-quality mountain bike saddle is 143mm in width and features a centre cut out to help relieve pressure on your sensitive areas. This means that you can shred the MTB trails for longer than before, without worrying about suffering from fatigue around your sit-bones. Nukeproof has also equipped this trial-ready saddle with their lightweight foam padding, so you can benefit from additional support on every ride. Coming kitted out with a durable vacuum-formed and water-repellent microfibre cover, this is a great choice of upgrade for riders who want a dependable saddle for all-weather conditions. Lightweight MTB Saddle with Low Stack Height All set for fast and fun MTB rides, this saddle has a low stack height, approx. 8mm lower than standard rails which means you aren’t using unnecessary space which could be better utilised with a longer dropper post. The saddle also has an ergonomic shape and all edges are rounded to ensure that it is as comfortable from a cycle in the park to the EWS stage.
Optimised Pedaling Position and Tyre Clearance The ergonomic design was achieved using a combination of different densities of super light foam to offer maximum comfort without increasing weight. It is curved up at the rear to hold the rider in an optimised pedalling position on long climbs and to provide more tyre clearance for longer travel bikes. It has been finished with a durable vacuum formed water repellent microfibre cover so that even on wet days it will be comfortable.
The additional padding of this Neutron Saddle ensures maximum comfort even during the most epic days in the mountains, hills and forests. The Neutron saddle features tough CrMo rails and as durability is a key consideration, Nukeproof has utilised a tough microfabric cover within its construction. This saddle is lightweight and suits a wide range of rider shapes and sizes, which makes it an ideal saddle for any trail riding discipline.
Ready for shredding the trails and beyond, this high-quality saddle is 143mm in width and features a central cut-out to help relieve pressure around your sit-bones. This means that you can enjoy the ride for much longer than before without worrying about suffering from fatigue. Nukeproof has gone the extra distance by also equipped this model with their lightweight foam padding, so you can benefit from all of the necessary support needed for all-day epics in the mountains. Coming complete with a durable vacuum-formed and water-repellent microfibre cover, this version offers exceptional comfort and protection in all-weather conditions. Sam Hill Saddle with Low Stack Height The high-quality saddle has a low stack height, approx. 8mm lower than standard rails which means you aren’t using unnecessary space which could be better utilised with a longer dropper post. The saddle also has an ergonomic shape and all edges are rounded to ensure that the saddle is as comfortable from a cycle in the park to the EWS stage. Please note: Due to the anodising process, the oil slick colouring can vary depending on the position, conditions and even how it catches the light, so not oil slick components are the same. Images are for illustration purposes only and there is unfortunately no way to guarantee the oil slick design on specific items.