Tested to the limit in all possible conditions by some of the world’s toughest and most demanding riders, Nukeproof disc pads will outperform the competition in wet weather or dry. No nonsense, High quality, High power braking with excellent modulation. Custom-manufactured in Taiwan to Nukeproof's exact standards.
This front thru-axle features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks. The axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it. All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle. Please note: Not compatible with 2021 Fox 36mm / 38mm forks. Diameter Axle Length Thread Pitch Thread Length RockShox 15mm Boost 158mm 1.5 10mm Fox 15mm Boost Not compatible with 2021 36mm / 38mm 155mm 1.5 13.5mm Click here for Nukeproof’s technical information.
The Vector's distinctive lines are tailored to enhance the performance of a top-level race bike. The CrMo rails add strength to your saddle.
The Vector's distinctive lines are tailored to enhance the performance of a top-level race bike.
The Outland Women's Shorts are packed with mountain-bike-ready features. Firstly, they're built tough - triple stitched hems that provide extra strength in areas prone to wear and tear, while high-quality YKK popper buttons and YKK zips offer a bombproof feel. The adjustable inner waist tabs allow you to dial in the perfect fit. Around the waist, you'll also enjoy the comfort of a mesh lining which also helps wick away sweat from this key area. Two front pockets one with a lanyard D-loop for attaching keys too and a zipped side leg pocket is ideal for stashing your phone and valuables. Nukeproof branded trims complete this exceptional mountain bike short. Nukeproof Outland Fully designed and developed by the Nukeproof team in Belfast, they use the highest quality fabrics, great MTB inspired cut/fit and have features they wanted out of their ride apparel.
The Blackline Race Long Sleeve Jersey uses body mapping technology with highly breathable and wicking Polartech ™ Powerdry ™ fabric on the upper part of the jersey to keep you dry, with Polartech ™ Delta ™ to keep you cool. Not only that the sleeves use tough yet super lightweight Cordura™ to fend of trail debris and added toughness. Lastly, an anti-bacterial finish helps prevent nasty niffs after a day of hard riding. A welded neck, flatlock and cover stitches (where required) ensure the 4-way stretch body gives the rider incredible comfort, even on the longest rides. Riding with a pack? The Race jersey is finished with silicone panels on the shoulders. This grips the pack straps and ensures it stays locked in place. Nukeproof Blackline Race Fully designed and developed by The Nukeproof team in Belfast, they use the highest quality fabrics, great MTB inspired cut/fit and have all the features they wanted out of their ride apparel. Blackline Race; No short cuts, no compromises, just pure performance designs with trail-ready technology.
The bearings have a titanium coating which is applied in a vaporised vacuum environment, this allows its structure and density to be fine-tuned. The ti (titanium) coating helps prevent rust and damage from external elements. The bearings are ABEC 5 certified and suit Nukeproof DUB bottom brackets as well as any other bottom requiring a 29x40x6.8mm bearing. For step-by-step fitting instructions click here.
Weighing in at only 38g, this tubeless repair kit is extremely lightweight and easy to carry or pack away in your backpack for your rides. It features a tool capsule that doubles up as a handle for the plug insertion tool. On the inside of the threaded section there is a valve core remover hidden away. On the opposite end, the hole has been designed to loosen stuck Presta valve nuts, which can be tricky to open if there is old sealant in the valve. The plugs are super tacky, so they do not require you to use additional glue. Spare plugs are available here.
Nukeproof end caps are available for the Generator 3 in 1 hub so you have the option to choose the axle system that fits your bike. This allows easy conversion between all major axle sizes: - QR, 135mm x 12mm or 142 x 12mm.
Taking inspiration from the hugely successful Horizon Pro flat pedal, they are extremely durable and impact resistant, and with design input from Nukeproof's Pro team riders, Matti Lehikoinen and Mike Jones, you can be sure you're riding on Pro approved design and performance. All New SPD Cleat System The SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately. Click here for a Step by Step Installation Guide
A direct replacement for the bearings found in Nukeproof BSA & pressfit Hollowtech II / GXP bottom brackets, these bearings have a titanium coating which is applied in a vaporised vacuum environment, which allows its structure and density to be fine-tuned. The ti (titanium) coating helps prevent rust and damage from external elements. These MR2437 bearings are ABEC 5 certified and will suit all Nukeproof BSA & pressfit Hollowtech II / GXP bottom brackets as well as any other bottom bracket requiring a MR2437 bearing. Please Note: To use with a GXP crankset, you will need to reuse the adapter you will currently have fitted in the non-driveside bearing. Click here to view the Nukeproof Step by Step How to Guide for Bearing Replacement.
The Blackline Mesh Sleeveless Base Layer is an incredibly lightweight and breathable cooling layer that features an open mesh knit fabric for increased ventilation and airflow. Because of the mesh, a layer of air is created between the skin and your training top further managing your core temperature. The knit fabric has fantastic wicking properties and is soft-touch. It has been used due to its superior wicking effect, drawing any excess sweat from the skin's surface and transferring it away from the body. This keeps you feeling dryer, fresher and cooler. The Nukeproof Mesh Base Layer is cut to a performance fit, sitting comfortably close to the body. A slight give in the knit offers a contouring appearance as well as allowing full freedom of movement. Minimal seams prevent friction against the skin during high-intensity training sessions. Nukeproof Blackline Fully designed and developed by The Nukeproof team in Belfast, they use the highest quality fabrics, great MTB inspired cut/fit and have all the features they wanted out of their ride apparel. The Blackline range is their premium trail collection.