This rear mech hanger is specifically designed for use with Nukeproof Digger 2022 frames. Whether you're replacing your original rear derailleur hanger or simply keeping one as a spare, this replacement is ideal for getting your mountain bike up and running again.
The Nukeproof Dolos wheelset has been designed as a strong and reliable wheelset for dirt jumping. The front hub comes with 20mm end caps fitted and there are additional 15mm end caps in the box. The rear hub is a 135mm x 10mm bolt up so will be perfect for those heavy hits. The rim is constructed from a special blend of alloys, which give it a similar hardness to 7-series alloy but with the ductility and yield properties of a 6-series. This means that you'll benefit from the best of both worlds as you ride. Nukeproof has also equipped this model with a micro-shot peened and anodised finish, which gives it an extra layer of resistance against corrosion and wear. As a result, you'll enjoy being able to session the jumps in all weather conditions, without worrying about the elements damaging your gear. This wheelset is only available in 26” and has a 25mm internal width suiting tyres from 1.6” to 2.5”. • Conversion Options: Front 15mm & 20mm end caps are also available separately but are included with wheels. • Driver Options: Comes with 11t Driver, 12t and 13t available separately. Manufacturer's Part Number: NUKDOLDJWS Black 26"
Replacement Dissent Rear Horse Shoe Kit, that is compatible with the 2020-2022 Nukeproof Dissent frame.
These high-quality bearings are designed specifically for use in high-stress locations such as frame pivot points and they are sealed to protect them from the elements. The kit contains 2x 6902, 4x 6800, 4x F6802E bearings. This kit will fit the 2016 - 2020 Alloy and Carbon Mega bikes.
These high-quality bearings are designed specifically for use in high-stress locations such as frame pivot points and they are sealed to protect them from the elements. The kit contains 4x 6901, 2x 6902, 4x 6800 bearings. This kit will fit the Alloy and Carbon Reactor bikes.
Featuring an ultra-strong T700/800 monocoque carbon fibre construction, this mountain bike (MTB) frame offers fantastic stiffness and durability without weighing down your ride with unnecessary excess grams. Nukeproof has also equipped it with a Factory Series Fox Float X rear shock for smooth and consistent rear end suspension performance, as you charge across rock gardens, tree roots and debris. Another highlight is its updated geometry with internal cable routing, which allows you to benefit from trail-ready handling and control with a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this is a perfect choice of upgrade for completing your full suspension MTB bike build. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Full Suspension Carbon MTB Frame To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre frame Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two-position adjustable Flip chip system Shock: Fox Float X, Factory Series, Kashima, 3 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Headset: Nukeproof, 44-56 IITS Weight: 3.5Kgs/7.7lbs (Medium option)
Genuine alloy replacement seat stays for Nukeproof Mega 275 model years 2016-2017.
Compatible with the 2021-2022 Nukeproof Megawatt.
Genuine alloy replacement seat stays for Nukeproof Mega 290 model years 2020-2021.
Designed for 2021-2022 Mega Alloy 290 models, these original Nukeproof covers offer great protection from their durable moulded silicone construction. Attaching to your chain stays via the 3M adhesive backing, the Mega chain stay Protector is the ideal barrier against bangs, dings and dirt.
This 290 to 297 MX Conversion Link enables you to convert your 290 Carbon Giga bike/frame to a mullet without the expense of a complete rear triangle. A mullet bike platform uses a 29" wheel at the front and a 27.5" at the rear, giving you the perfect balance of pace, stability, agility and control for riding anywhere on Earth. This kit turns your Giga 290 into a custom super-enduro mullet that ensures more front-end grip, enhanced rolling efficiency and playfulness on steep descents and technical terrain sections. This MX Horse Shoe Link includes everything you need* to convert a 290c Giga frame into a mullet bike, running a 29” front and 27.5” rear wheel. Forged from 6061 Aluminium Alloy with new bearings pre-installed and a tough anodised finish. No additional frame parts are needed to install the MX Horse Shoe Kit, it is a straight replacement for the current Horse Shoe. The MX Horse Shoe Link is an alternative option to the MX Carbon rear triangle, the MX Horse Shoe Link corrects the bike's geometry when a 27.5’’ wheel is installed to the 290 rear triangle. If you would like a complete conversion to a Giga MX 297 with a shorter chainstay and wheelbase, we would recommend the Giga Carbon 297 MX Kit. *Note: You will require a Boost 148mm 27.5” Rear wheel and tyre, not included. The Nukeproof GIGA: Gluttony is not a sin.
Genuine alloy replacement seat stays for Nukeproof Mega 290 model years 2016-2017.