Crankbrothers synthesis wheels take a new approach to wheel systems, focusing on a compliant front wheel with a stif rear wheel to achieve optimum ride characteristics for each. The compliant front wheel improves handling and control in the turns, while a stif rear wheel enhances stability and tracking at speed. In the alloy range, these differing characteristics are achieved by variations chosen in spoke tension, spoke weight, spoke count, rim width and rim weight.The range features Enduro, XC/Trail and E-bike models, aiming to accommodate as many riders as possible. There are 2 hub options available on enduro and XCT models - a crankbrothers hub and an i9 1/1 hub, providing 4 degrees of engagement. Enduro and XCT rim only availability also gives the option for custom wheel building.Front wheelInner rim width - 31.5,Spoke count - 28,Spokes - Sapim D-Light,Weight - 837g 27.5 / 865 29.
Synthesis level 11 Enduro 29" wheelset providing control and stability for Enduro riding.Front and rear specific rims offer stiffness and compliance characteristics where they are rewarded best, while front and rear specific inner rim widths are optimized for wider tires in the front and narrower tires in the rearCrankbrothers has partnered with Industry Nine for the Synthesis 11 hub. Handbuilt in Asheville, NC, i9's Hydra hub has near instantaneous engagement offering previously unheard of responsiveness.Specific spoke counts, weights, and tensions are employed on front and rear wheels to enhance the tuned wheel system and riding experience. Synthesis wheels are built using the highest quality Sapim stainless steel spokes. Synthesis 11 series wheels are built with bladed spokes for further weight savings.Key Features:Mountain bike tuned carbon wheel system for e-bikes.,Front and rear specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding.,Compliant tuned front wheel improves handling and maximizes grip and control in turns.,Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed..Specifications:Engagement: 17º six pawls,ETRTO: 622mm (29),Hub: crankbrothers Synthesis standard,Inner Rim Width: Front 31.5mm, Rear 31.5mm,Outer Rim Width: Front 38.7mm, Rear 39.5mm,Rim Height 18.75mm,Spoke Count: Front 32, Rear 32,Spoke Type: ,Warranty: Lifetime (rim only).
The crankbrothers tuned wheel system now includes an aluminium range.Crankbrothers synthesis wheels take a new approach to wheel systems, focusing on a compliant front wheel with a stif rear wheel to achieve optimum ride characteristics for each. The compliant front wheel improves handling and control in the turns, while a stif rear wheel enhances stability and tracking at speed. In the alloy range, these differing characteristics are achieved by variations chosen in spoke tension, spoke weight, spoke count, rim width and rim weight.The range features Enduro, XC/Trail and E-bike models, aiming to accommodate as many riders as possible. There are 2 hub options available on enduro and XCT models - a crankbrothers hub and an i9 1/1 hub, providing 4 degrees of engagement. Enduro and XCT rim only availability also gives the option for custom wheel building.Rear wheelInner rim width - 29.5,Spoke count - 32,Spokes - Sapim Race,Weight - 1018g 27.5 / 1048g 29,Hub engagement - 4 degrees.
The crankbrothers tuned wheel system now includes an aluminium range.Crankbrothers synthesis wheels take a new approach to wheel systems, focusing on a compliant front wheel with a stif rear wheel to achieve optimum ride characteristics for each. The compliant front wheel improves handling and control in the turns, while a stif rear wheel enhances stability and trackinh at speed. In the alloy range, these differing characteristics are achieved by variations chosen in spoke tension, spoke weight, spoke count, rim width and rim weight.The range features Enduro, XC/Trail and E-bike models, aiming to accommodate as many riders as possible. There are 2 hub options available on enduro and XCT models - a crankbrothers hub and an i9 1/1 hub, providing 4 degrees of engagement. Enduro and XCT rim only availability also gives the option for custom wheel building.Front rimInner rim width - 31.5,Spoke count - 28.Rear rimInner rim width - 29.5,Spoke count - 32.
Synthesis level 11 enduro wheelset with 29" front wheel and 27.5" rear wheel.Front and rear specific rims offer stiffness and compliance characteristics where they are rewarded best, while front and rear specific inner rim widths are optimized for wider tires in the front and narrower tires in the rearCrankbrothers has partnered with Industry Nine for the Synthesis 11 hub. Handbuilt in Asheville, NC, i9's Hydra hub has near instantaneous engagement offering previously unheard of responsiveness.Specific spoke counts, weights, and tensions are employed on front and rear wheels to enhance the tuned wheel system and riding experience. Synthesis wheels are built using the highest quality Sapim stainless steel spokes. Synthesis 11 series wheels are built with bladed spokes for further weight savings.Key Features: Mountain bike tuned carbon wheel system for e-bikes. , Front and rear specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. , Compliant tuned front wheel improves handling and maximizes grip and control in turns. , Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed.,.Specifications: Engagement: 17º six pawls, ETRTO: 622mm (29), Hub: crankbrothers Synthesis standard, Inner Rim Width: Front 31.5mm, Rear 31.5mm, Outer Rim Width: Front 38.7mm, Rear 39.5mm, Rim Height 18.75mm, Spoke Count: Front 32, Rear 32, Spoke Type:, Warranty: Lifetime (rim only).
Our challenge with the Integra 35 stems, was to keep the strength, stiffness and durability of the larger 35mm diameter package at the same weight as the 31.8mm equivalent.The strength, stiffness and durability were all matched to the 31.8mm equivalent, with and average of just 1.5g added to the Integra.The new Integra 35 Direct Mount stems feature the same lightweight, 6-bolt design as the original Integra II and Renthal have improved the structure of the stem.The Integra 35 uses the same C-shape clamping system as the Apex stem range, which has been increased in size to cope with the demands of top level DH racing. The use of two independent, C-shape handlebar clamps allows the stem body material to be reduced to a minimum, whilst maintaining an incredibly stiff and strong structure.The ultra-wide, 64mm handlebar clamping area increases torsional rigidity and the use of just six bolts vastly reduces overall weight. In addition, the uninterupted clamp on the underside of the handlebar eliminates stress risers found on most other clamps, which can lead to handlebar failure.The size range has also now increased to include 45mm and 50mm lengths. Both of which are available in either zero rise or +10mm rise giving you four options:45 x Zero. Length 45mm. Rise zero. Bar clamp 35mm.,45 x +10mm. Length 45mm. Rise +10mm. Bar clamp 35mm. ,50 x Zero. Length 50mm. Rise zero. Bar clamp 35mm. ,50 x +10mm. Length 50mm. Rise +10mm. Bar clamp 35mm.,All of them suit Boxxer/IS..Weights45mm x Zero: 133g,45mm x 10mm: 156g,50mm x Zero: 157g,50mm x 10mm: 177g.
Our challenge with the Apex and Integra stems, was to keep the strength, stiffness and durability of the larger 35mm diameter package at the same weight as the 31.8mm equivalent. The strength, stiffness and durability were all matched to the 31.8mm equivalent, with and average of just an average of 7g added to the Apex.This all-new Renthal Apex stem covers all sectors of mountain bike. Light enough for XC racing, stiff and strong enough for a 780mm handlebar.The Renthal Apex stem features our unique new clamping system. This allows much of the stem body material to be removed, whilst retaining the strength and stiffness demanded by modern, wide handlebars. The clamps are inserted over the small diameter section of the handlebar and slid into the centre, giving a 240deg wrap of the handlebar.The Renthal Apex construction comprises a fully CNC machined 2014 aluminium body and 7075 aluminium clamps. An oversize centre bore, extensive 3-D machining and external webbing maximise structural strength and stiffness and minimise weight.Continuing Renthal's philosophy of giving the customer the choice in set-up, the stem is available in 33, 40, 50, and 60mm lengths. Each of these sizes can be flipped to give either a +/-6deg rise. This gives options for riders and bikes of all size, type and style.Weights33mm - 112g,40mm - 122g,50mm - 136g ,60mm - 147g.
The new Integra II Direct Mount stems feature the same lightweight, 6-bolt design as the original Integra and Renthal have improved the structure of the stem. The Integra II uses the same C-shape clamping system as the Apex stem range, which has been increased in size to cope with the demands of top level DH racing. The use of two independent, C-shape handlebar clamps allows the stem body material to be reduced to a minimum, whilst maintaining an incredibly stiff and strong structure.The ultra-wide, 64mm handlebar clamping area increases torsional rigidity and the use of just six bolts vastly reduces overall weight. In addition, the uninterupted clamp on the underside of the handlebar eliminates stress risers found on most other clamps, which can lead to handlebar failure.The size range has also now increased to include 45mm and 50mm lengths. Both of which are available in either zero rise or +10mm rise giving you four options:45 x Zero. Length 45mm. Rise zero. Bar clamp 31.8mm.,45 x +10mm. Length 45mm. Rise +10mm. Bar clamp 31.8mm. ,50 x Zero. Length 50mm. Rise zero. Bar clamp 31.8mm. ,50 x +10mm. Length 50mm. Rise +10mm. Bar clamp 31.8mm. .All of them suit Boxxer/IS. Weights:45mm x Zero: 130g,45mm x 10mm: 155g,50mm x Zero: 145g,50mm x 10mm: 175g.
This all-new Renthal Apex stem covers all sectors of mountain bike. Light enough for XC racing, stiff and strong enough for a 780mm handlebarThe Renthal Apex stem features our unique new clamping system. This allows much of the stem body material to be removed, whilst retaining the strength and stiffness demanded by modern, wide handlebars. The clamps are inserted over the small diameter section of the handlebar and slid into the centre, giving a 240deg wrap of the handlebarThe Renthal Apex construction comprises a fully CNC machined 2014 aluminium body and 7075 aluminium clamps. An oversize centre bore, extensive 3-D machining and external webbing maximise structural strength and stiffness and minimise weightContinuing Renthal's philosophy of giving the customer the choice in set-up, the stem is available in 40, 50, 60, 70, 80 and 90mm lengths. Each of these sizes can be flipped to give either a +/-6deg rise. This gives options for riders and bikes of all size, type and style31.8mm Clamp diameter,Fully CNC machined 2014 aluminium body,7075 aluminium clamps,Unique 240deg twin handlebar clamps,Laser marked graphics,Durable anodised finish,Hard anodised clamps,Stainless steel hardware with assembled washers.Weights40mm - 118g,50mm - 127g ,60mm - 136g ,70mm - 140g ,80mm - 149g ,90mm - 158g.
Renthal's revolutionary DUO™ stem combines high strength with ultra low weight. The stem is horizontally divided down the centre which allows it to be CNC machined in two pieces. This method allows unrestricted access to the core of the stem which enables weight to be reduced to the absolute minimum without compromising strength. In addition this gives an uninterrupted U shape clamping area, which eliminates the stress risers found on most other clamps which can lead to handlebar failure. Rise 10 deg,Length 40 or 50mm,Weight 124g (40mm), 137g (50mm) including bolts,Handlebar Clamp Diameter 31.8mm,Material 6082 T6 aluminium.