Key Features:1 1/8" Threadless headset,Ball bearings,Steel cups,For 34mm 1 1/8" headtubes.
Key Features:1 1/8" threaded headset,Ball bearings,Steel cups,For 44mm 1 1/8" headtubes.
AN ICON, MADE EVEN BETTERSPECS- Integrated Mips® brain protection system- Featherweight webbing with Slimline™ buckle- Ionic+™ anti-microbial paddingCONSTRUCTION- In-Mold polycarbonate shell with EPS liner- Thermoformed SL Roll Cage™ reinforcementFIT SYSTEM- Roc Loc® 5 Air MipsVENTILATION- 19 Wind Tunnel™ vents with internal channelingSUPER FIT™ SIZES- S 20”–21.75” / 51–55cm- M 21.75”–23.25” / 55–59cm- L 23.25”–24.75” / 59–63cm
Traction grips are developed for extreme conditions and for those that want additional mechanical grip.Traction grips use an advanced design and need to be set up correctly. With the words 'top' and 'forward' accompanied by some useful arrows, setting up the Traction grips is a cinch. The reason for this positioning is that the grip pattern alternates around its circumference to more effectively interact with each part of your hand.The traction grip has six unique features;1. Forward Facing Ramped Finger Ridges;When pulling back on the handlebars, the majority of the grip and torque is concentrated through the fingers. Forward facing, ramped ridges in the finger area give increased grip when pulling back, yet lay flat in normal riding conditions, for improved comfort.2. Rearward Facing Angled Palm Grooves;When braking or steep descending, the majority of the torque and grip is concentrated through the palm. Grooves cut with a rearward facing angle give improved grip in this situation. As the groove is cut into the grip, it gives a comfortable, large surface area for the palm in normal riding conditions.3. Consistent Pattern;The grooves and ridges are consistent across the width of the grip, to accommodate riding with your hand in any position on the grip. Be it right in the centre, or with the heal of the hand over the end of the grip, the additional traction is just as effective.4. Open-Ended Grip Features;Riding in extreme conditions, crashes are inevitable, which can result in the grip getting packed with mud. We designed the grips to have open-ended features, allowing mud to be purged off the end of the grip. Simply push outwards with your hand.5. Offset Grip Material;For comfort, the thickness of grip material under the palm area has been increased to give improved cushioning. Thinner grip material is used under the finger area to keep the overall outside diameter the same.6. Compound Options;We offer this grip pattern in four compounds; Ultra Tacky, Soft With Dupont Kevlar®, Soft, Medium,.Specifications:Left and right specific with forwards and top side arrow markings.,CNC machined 6082 T6 aluminium locking collars.,Integrated grip body and locking collars for ultimate durability.,Four compounds available.,Smooth profile end transition, for maximum comfort.,130mm overall length, 110mm grip section.,5mm outside diameter.,Snap-fit end caps.,116g weight (pair)..
Renthal Fatbar AluminiumThe second version of the Renthal Fatbar has undergone a full structural re-design. In keeping with the demand for wider, gravity oriented handlebars, we have increased the width to 800mm. Our proven high grade 7050 T6 aluminium and variable gauge taperwall tubing is the key ingredient of the Fatbar. With careful and efficient use of material, we have massively reduced the weight to a trail-worthy 315g. At the same time performance levels retain the same legendary strength and durability and match the stiffness of the original Fatbar. The new Fatbar is available in our market leading choice rise options; 10, 20 30 and 40mm. And we have now added a colour option; either the iconic Renthal AluGold hard anodised or the all new black hard anodised finish. *Bar clamp size is 31.8mm*Renthal Fatbar CarbonTo align with Renthal's updated Fatbar and Fatbar Lite ranges, we have now updated the Fatbar Carbon. The key features are; Increased width, from 780mm up to 800mm, aligning with Fatbar and Fatbar 35. , Market leading weight of just 225g. , The bar retains the same great flex characteristics, strength and durability as the very popular, original Fatbar Carbon. , Market leading rise options of 10, 20, 30 and 40mm. , 7 degree back sweep / 5 degree up sweep geometry. , Used by Aaron Gwin to win the 2017 UCI DH World Cup. .
The ever popular Fatbar Lite has been given some structural tweaks to bring it bang up to date with the increased width at 760mm. With efficient use of high grade 7050 T6 aluminium, we have kept the same market leading weight of 270g.The new Fatbar Lite achieves all of this whilst retaining the same high level of strength and durability and matching the stiffness of the original Fatbar Lite.The new Fatbar is available in our market leading choice rise options; 10, 20, 30 and 40mm. And we have now added a colour option; either the iconic Renthal AluGold hard anodised or the all new black hard anodised finish.31.8mm clamp diameter.
Women, in particular, will love this on-trend and practical basket, with mounting elements specially designed for fitting to the back of ladies bikes. Made from a robust plastic, this basket comes in classic black for an effortless complement to almost any bike style. Ideal for carrying your essentials from A to B, this basket leaves you with ample storage space and means you can leave the car at home for shorter journeys, without you worrying about where you’ll store luggage or groceries. Designed for all kinds of weather conditions, this basket is tailored for permanent fitting to your bike.You needn’t worry about removing it after locking up your bike and finding a safer spot to store it until your good to ride again. This sturdy basket can be permanently attached to the rack of your bike, with permanent mounting hardware included along with the basket itself. The sides of this basket have a chamfered edge, with the slight slope allowing for easy fitting your bike frame. Looking for a practical bicycle basket that can withstand a little rain? The Weave WP from Basil is a perfect choice. Key Features:Basil Weave WP bicycle basket suitable for fixed mounting to a carrier..Stylish exterior with generous storage capacity..Plastic construction with mounting accessories included..Designed for permanent attachment to your bike..Designed to withstand all weather conditions..Specifications:Dimensions: 43cm x 32cm x 25cm.Position on the bicycle: Rear.Installation on: Luggage carrier rack.Material: Plastic.Wire/Mesh: Non-applicable.Assembly: Lengthwise of the carrier rack.Mounting kit included: Yes.Removable: No.Handle: No.Anti-theft: No.Lid Included: No.Suitable for dogs: No.Carrying capacity: Max. 5 kg.
Synthesis level 11 enduro wheelset with 29" front wheel and 27.5" rear wheel.Front and rear specific rims offer stiffness and compliance characteristics where they are rewarded best, while front and rear specific inner rim widths are optimized for wider tires in the front and narrower tires in the rearCrankbrothers has partnered with Industry Nine for the Synthesis 11 hub. Handbuilt in Asheville, NC, i9's Hydra hub has near instantaneous engagement offering previously unheard of responsiveness.Specific spoke counts, weights, and tensions are employed on front and rear wheels to enhance the tuned wheel system and riding experience. Synthesis wheels are built using the highest quality Sapim stainless steel spokes. Synthesis 11 series wheels are built with bladed spokes for further weight savings.Key Features: Mountain bike tuned carbon wheel system for e-bikes. , Front and rear specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. , Compliant tuned front wheel improves handling and maximizes grip and control in turns. , Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed.,.Specifications: Engagement: 17º six pawls, ETRTO: 622mm (29), Hub: crankbrothers Synthesis standard, Inner Rim Width: Front 31.5mm, Rear 31.5mm, Outer Rim Width: Front 38.7mm, Rear 39.5mm, Rim Height 18.75mm, Spoke Count: Front 32, Rear 32, Spoke Type:, Warranty: Lifetime (rim only).
The crankbrothers tuned wheel system now includes an aluminium range.Crankbrothers synthesis wheels take a new approach to wheel systems, focusing on a compliant front wheel with a stif rear wheel to achieve optimum ride characteristics for each. The compliant front wheel improves handling and control in the turns, while a stif rear wheel enhances stability and trackinh at speed. In the alloy range, these differing characteristics are achieved by variations chosen in spoke tension, spoke weight, spoke count, rim width and rim weight.The range features Enduro, XC/Trail and E-bike models, aiming to accommodate as many riders as possible. There are 2 hub options available on enduro and XCT models - a crankbrothers hub and an i9 1/1 hub, providing 4 degrees of engagement. Enduro and XCT rim only availability also gives the option for custom wheel building.Front rimInner rim width - 31.5,Spoke count - 28.Rear rimInner rim width - 29.5,Spoke count - 32.
The crankbrothers tuned wheel system now includes an aluminium range.Crankbrothers synthesis wheels take a new approach to wheel systems, focusing on a compliant front wheel with a stif rear wheel to achieve optimum ride characteristics for each. The compliant front wheel improves handling and control in the turns, while a stif rear wheel enhances stability and tracking at speed. In the alloy range, these differing characteristics are achieved by variations chosen in spoke tension, spoke weight, spoke count, rim width and rim weight.The range features Enduro, XC/Trail and E-bike models, aiming to accommodate as many riders as possible. There are 2 hub options available on enduro and XCT models - a crankbrothers hub and an i9 1/1 hub, providing 4 degrees of engagement. Enduro and XCT rim only availability also gives the option for custom wheel building.Rear wheelInner rim width - 29.5,Spoke count - 32,Spokes - Sapim Race,Weight - 1018g 27.5 / 1048g 29,Hub engagement - 4 degrees.
Synthesis level 11 Enduro 29" wheelset providing control and stability for Enduro riding.Front and rear specific rims offer stiffness and compliance characteristics where they are rewarded best, while front and rear specific inner rim widths are optimized for wider tires in the front and narrower tires in the rearCrankbrothers has partnered with Industry Nine for the Synthesis 11 hub. Handbuilt in Asheville, NC, i9's Hydra hub has near instantaneous engagement offering previously unheard of responsiveness.Specific spoke counts, weights, and tensions are employed on front and rear wheels to enhance the tuned wheel system and riding experience. Synthesis wheels are built using the highest quality Sapim stainless steel spokes. Synthesis 11 series wheels are built with bladed spokes for further weight savings.Key Features:Mountain bike tuned carbon wheel system for e-bikes.,Front and rear specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding.,Compliant tuned front wheel improves handling and maximizes grip and control in turns.,Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed..Specifications:Engagement: 17º six pawls,ETRTO: 622mm (29),Hub: crankbrothers Synthesis standard,Inner Rim Width: Front 31.5mm, Rear 31.5mm,Outer Rim Width: Front 38.7mm, Rear 39.5mm,Rim Height 18.75mm,Spoke Count: Front 32, Rear 32,Spoke Type: ,Warranty: Lifetime (rim only).
Crankbrothers synthesis wheels take a new approach to wheel systems, focusing on a compliant front wheel with a stif rear wheel to achieve optimum ride characteristics for each. The compliant front wheel improves handling and control in the turns, while a stif rear wheel enhances stability and tracking at speed. In the alloy range, these differing characteristics are achieved by variations chosen in spoke tension, spoke weight, spoke count, rim width and rim weight.The range features Enduro, XC/Trail and E-bike models, aiming to accommodate as many riders as possible. There are 2 hub options available on enduro and XCT models - a crankbrothers hub and an i9 1/1 hub, providing 4 degrees of engagement. Enduro and XCT rim only availability also gives the option for custom wheel building.Front wheelInner rim width - 31.5,Spoke count - 28,Spokes - Sapim D-Light,Weight - 837g 27.5 / 865 29.