Nordisk Ven 2.5 Inflatable Sleeping MatThe Nordisk Ven 2.5 Inflatable Sleeping Mat has a zone construction and ultra-light weight foam shaves even more off the total weight and makes Ven extremely attractive for the extreme outdoor enthusiasts where every gram counts. The push/pull valve makes it easy and quick to in- and deflate.SpecificationsLength: 122cmWidth: 51cmHeight: 2cmWeight: 280gFeaturesExtremely light self-inflating matHalf-length torso contoured shapeStrong 20D Honeycomb rip-stop shellEasy clean surfaceHybrid foam zone constructionHorizontal and vertical tubes combinedUltra-light weight foamBased on studies of sleeping patternsDurable push/pull valveTiny pack sizeBuy Nordisk Sleeping Mats from Chain Reaction Cycles, the World's Largest Online Bike Store.
Any product that adds support and strength to your ankle is worth paying attention to in this sport and the Stay Strong Conflict Ankle Support does both of those things incredibly well! The Conflict Ankle Support uses a lace up style design that features plastic inserts to protect key areas around your ankle from impacts. To ensure that the ankle support isn't uncomfortable or stuffy, especially on those warmer days, the tongue is breathable to let hot air escape. Pull tabs at the front and back make it quick and easy to get the supports on and then an extra under-foot strap adds even more support to your ankle. The Stay Strong Conflict Ankle Supports are sold in pairs.
The Dynaplug Air Tubeless Road Tyre Repair & Inflation Kit is an all in one tyre repair and reinflation solution, there is no faster way to get yourself back up and rolling.No need to remove the tyre, no messy glues or solvents, just plug and ride!Shorter Road version designed not to bottom out when used on narrower road slicks. For MTB tyres please use our MTB Air with a longer insertion tube to get past thicker MTB treadsA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationCO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, it's also a good idea to give the Air system a try at home before you need to do it 'in the field'Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouchIn addition, there's an air hose for CO2 inflation if you just need to air up through the valve stemMade with pride in the USA using patented technology and warrantied for life under normal usageDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to inflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds. The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Dynaplug Air Tubeless MTB Repair & Inflation Kit is an all in one tyre repair and reinflation solution and means that there is no faster way to get yourself back up and rolling.No need to remove the tyre, no messy glues or solvents, just plug and ride!Long MTB version designed to ensure the CO2 vents end up well inside the tyre, even past aggressive treads, for 35c or smaller road tyres please use our ROAD Air with a shorter insertion tubeA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationCO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, its also a good idea to give the Air system a try at home before you need to do it 'in the field'Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouchIn addition, there s an air hose for CO2 inflation if you just need to air up through the valve stemMade with pride in the USA using patented technology and warrantied for life under normal usageDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to inflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds. The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Dynaplug Air Tubeless MTB Repair & Inflation Kit is an all in one tyre repair and reinflation solution and means that there is no faster way to get yourself back up and rolling.No need to remove the tyre, no messy glues or solvents, just plug and ride!Long MTB version designed to ensure the CO2 vents end up well inside the tyre, even past aggressive treads, for 35c or smaller road tyres please use our ROAD Air with a shorter insertion tubeA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationCO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, its also a good idea to give the Air system a try at home before you need to do it 'in the field'Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouchIn addition, there s an air hose for CO2 inflation if you just need to air up through the valve stemMade with pride in the USA using patented technology and warrantied for life under normal usageDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to inflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds. The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Dynaplug Air Tubeless MTB Repair & Inflation Kit is an all in one tyre repair and reinflation solution and means that there is no faster way to get yourself back up and rolling.No need to remove the tyre, no messy glues or solvents, just plug and ride!Long MTB version designed to ensure the CO2 vents end up well inside the tyre, even past aggressive treads, for 35c or smaller road tyres please use our ROAD Air with a shorter insertion tubeA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationCO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, its also a good idea to give the Air system a try at home before you need to do it 'in the field'Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouchIn addition, there s an air hose for CO2 inflation if you just need to air up through the valve stemMade with pride in the USA using patented technology and warrantied for life under normal usageDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to inflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds. The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Dynaplug Air Tubeless MTB Repair & Inflation Kit is an all in one tyre repair and reinflation solution and means that there is no faster way to get yourself back up and rolling.No need to remove the tyre, no messy glues or solvents, just plug and ride!Long MTB version designed to ensure the CO2 vents end up well inside the tyre, even past aggressive treads, for 35c or smaller road tyres please use our ROAD Air with a shorter insertion tubeA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationCO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, its also a good idea to give the Air system a try at home before you need to do it 'in the field'Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouchIn addition, there s an air hose for CO2 inflation if you just need to air up through the valve stemMade with pride in the USA using patented technology and warrantied for life under normal usageDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to inflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds. The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The easy way to inflate tubeless tyres. Airshot has been developed to enable hassle free inflation of tubeless tyres without the need for a compressor.Tubeless tyres have become popular due to the obvious associated operational advantages of, amongst others: running lower pressures; puncture resistance; and, overall weight reduction.However, there is one major downside associated with the use of tubeless, which can outweigh the benefits. The thought of struggling to mount a tyre on the bead with a track pump, or using expensive CO2 cartridges, to inevitably give up (after much cursing and perspiration if you are like me) and take the wheels to a bike shop, an expense that really does add up!Airshot, gives you the ability to charge an air bottle quite easily using a normal track pump. Then, by simply applying the pump head to the valve on your wheel and releasing the air tap, a fast high volume shot of air is released to instantly mount the tyre onto the bead.An ideal solution, particularly when away at races stuck in the middle of nowhere (usually in a muddy field!) with no power for a compressor and no bike shop for miles! It really does make it hassle free to swap tyres which are damaged, or to alternate tyre types with changing weather conditions/terrain.
The Tubeless Air Tank Inflator features a bypass air channel system that allows air to inflate the tyre directly from the floor pump with no inflation pressure loss. It is also compatible with Schrader, Presta and Dunlop valves and has an auto/manual condensed water bleeder valve that is incorporated into its safety valve system.
Beto Tubeless Air Tank InflatorThe Tubeless Air Tank Inflator from Beto offers a boosted inflation for 5-seconds inflation for most brands of tubeless tyre when it has 160 PSI charged in the tank. It features a bypass air channel system that allows air to inflate the tyre directly from the floor pump with no inflation pressure loss. It is also compatible with Schrader, Presta and Dunlop valves and has an auto/manual condensed water bleeder valve that is incorporated into its safety valve system.Features: 5-seconds inflation for most tubeless tyres when 160 PSI charged in the tank Bypass air channel allows air goes directly from floor pump to tyre Continuously providing large air flow to pop-seal tubeless tyre's bead ring Durable steel structure can sustain up to 700 PSI (tested result) Charge valve Schrader Discharge valve patented Tri-Valve LD8 Head fits Schrader/Presta/Dunlop Auto/manual condensed water bleeder valve incorporated with safety valveBuy Beto Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
*Please note, this pump now has a Smart head which serves both Presta and Schrader valves’Jet Air 1601-PSI Air Accumulator Works with most 160-PSI rated floor pumps,Provides continuous large air flow to pop-seal tubeless tyre’s,4-second inflation for most tubeless tyres with 160PSI charged in the tank,Patented bypass air channel allows for air to go flow directly,Charge: Schrader valve / Discharge: Beto patented 3-valve LD head,Heavy gauge steel structure tested up to 700PSI. road.cc 4.5/5 Review:
Have you ever had the struggle of trying to inflate your tubeless tyre system with nothing but a track pump Help is at hand, introducing the Airshot.Airshot has been developed to enable hassle free inflation of tubeless tyres without the need for a compressor. Pressurised using an ordinary track pump, air can then be released in a rapid but controlled fashion via a release tap seating troublesome tyres on your rims.Dimensions : 39.5 x 11 x 8 cmApprox. Weight : 0.620 kg