Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron Direct Mount Mountain Bike StemThe Nukeproof Neutron Direct Mount Stem is cold-forged from high-grade 6061 aluminium for optimum strength. It features extensive CNC machining to shave off excess material and is specifically built to tackle the gnarliest of DH trails.Ultimate Strength and StiffnessNukeproof has redesigned the four-bolt faceplate system to shave some weight whilst retaining strength to offer maximum security against bar slippage. The ultra-wide clamping area provides exceptional stiffness and security, and the direct mount attachment provides a clean finish when mounted to your dual crown DH forks.Features:Material: 6061 AlloyBolts: Oversized M6 for secure connection to the forkLength: Adjustable between 47mm - 52mmRise: 30°Weight: 160gDirect Mount Stem instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Featuring extensive CNC machining to shave off excess material, this stem is specifically built to tackle the gnarliest of DH trails. Ultimate Strength and Stiffness Nukeproof has redesigned the four-bolt faceplate system to shave some weight whilst retaining strength to offer maximum security against bar slippage. The ultra-wide clamping area provides exceptional stiffness and security, and the direct mount attachment provides a clean finish when mounted to your dual crown DH forks.
Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 Alloy Riser Bar (31.8mm)This revised Neutron V2 Alloy Riser Bar (31.8mm) from Nukeproof, features an updated profile with the same angles and rise options as before, so you can enjoy reliable and precise steering. It features a shot-peened alloy construction, which gives you fantastic durability and strength on the roughest of rides. This version is also fitted out with a 9-degree backsweep that doesn't reduce its reach, so won’t lose any reach like you would on a standard bar.Click here to view and download handlebar instructions.Features:Material: 6061 AlloyFinish: Shot-peenedBacksweep: 9 degreesUpsweep: 5 degreesLength: 800mmDiameter: 31.8mmTechnical Markings: Markings on the top of the handlebarWeight: 380g (25mm rise version)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron SaddleThe Nukeproof Neutron saddle is designed with long-distance mileage in mind, providing an increased level of padding compared to more race focused saddles that Nukeproof offer. This additional padding ensures maximum comfort even during the most epic days in the mountains, hills and forests.Lightweight and DurableThe Neutron saddle features tough CrMo rails and as durability is a key consideration, Nukeproof has utilised a tough microfabric cover within its construction. This saddle is lightweight and suits a wide range of rider shapes and sizes, which makes it an ideal saddle for any trail riding discipline.Features:Material: Microfabric (cover)Use: DH, AM, XCLength: 280mmWidth: 145mmRails: 7mm CrMoWeight: 295gBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron Top Headset CupThis Nukeproof headset is compatible with the bearings from the Nukeproof Steel Bearing or the upgraded Nukeproof Ti coated bearing with stainless balls. Designed to ensure the highest performance for tough and challenging conditions, these headsets have been engineered with durability and quality in mind.The latest generation of headsets has been revised, improved and expanded for optimum fit, sealing and performance as well as compatibility with a wide range of fork and frame standards. Featuring sealed angular contact bearings, split alloy crown races and upper and lower bearing cups CNC-machined from proprietary aluminium, the headset offers the optimum balance of lightweight, strength and durability for performance across all riding disciplines.The is available in a range of options to cover multiple fork/headtube configurations, including a full range of Standard Steerer (SS–1-1/8') and Tapered Steerer (TS–1-1/8' to 1.5') combinations. Internal and external cup options also available including zero-stack versions with internal top and bottom cups.All models feature a super tough black hard anodised finish, with laser-etched graphics.Don't know which headset you need? No problem! Simply use our Headset Technical Guide which includes a Headset Finder.Features:Specific Top Headset cupReplaceable angular contact bearingsLaser-etched graphics (including code)Split Alloy Crown Race for easy installation/removal Hard Anodised FinishInternal and external optionsReducer crown race for 1.5' availableBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
It features extensive CNC machining to shave off excess material and is specifically built to tackle the gnarliest of DH trails while staying light enough for all-round trail riding. Ultimate Strength and Stiffness Nukeproof has redesigned the four-bolt faceplate system to shave some weight whilst retaining strength, which offers maximum security against bar slippage. The ultra-wide clamping area provides exceptional stiffness and security, and the low stack height provides more cockpit tuning possibilities.
Nukeproof Neutron Top Headset CupThis Nukeproof headset is compatible with the bearings from the Nukeproof Steel Bearing or the upgraded Nukeproof Ti coated bearing with stainless balls. Designed to ensure the highest performance for tough and challenging conditions, these headsets have been engineered with durability and quality in mind.The latest generation of headsets has been revised, improved and expanded for optimum fit, sealing and performance as well as compatibility with a wide range of fork and frame standards. Featuring sealed angular contact bearings, split alloy crown races and upper and lower bearing cups CNC-machined from proprietary aluminium, the headset offers the optimum balance of lightweight, strength and durability for performance across all riding disciplines.The is available in a range of options to cover multiple fork/headtube configurations, including a full range of Standard Steerer (SS–1-1/8') and Tapered Steerer (TS–1-1/8' to 1.5') combinations. Internal and external cup options also available including zero-stack versions with internal top and bottom cups.All models feature a super tough black hard anodised finish, with laser-etched graphics.Don't know which headset you need? No problem! Simply use our Headset Technical Guide which includes a Headset Finder.Features:Specific Top Headset cupReplaceable angular contact bearingsLaser-etched graphics (including code)Split Alloy Crown Race for easy installation/removal Hard Anodised FinishInternal and external optionsReducer crown race for 1.5' availableBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron AM StemConstructed with high-quality 6061 aluminium and cold-forged to optimise its strength, Nukeproof has ensured the Neutron AM stem is ready for anything. It’s strong enough for the toughest downhill trail, yet as it has also been CNC machined to remove unnecessary weight its light enough for trail rides too.Ultimate Strength and StiffnessNukeproof has redesigned the four-bolt faceplate system to shave some weight whilst retaining strength, which offers maximum security against bar slippage. The ultra-wide clamping area provides exceptional stiffness and security, and the low stack height provides more cockpit tuning possibilities.Features: Material: 6061 Alloy Stack Height: 40mm Offset: 0 deg Mounting System: Standard 6 bolt Invertible: No Compatibility: 1 1/8" steerers and separate 31.8mm or 35mm bar clamp options Stem Cap Included: No Weight: 185gBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.