This freehub body set is designed for use with Nukeproof Neutron V2 hubs. A new hub seal and bushing is supplied with Nukeproof freehubs. To avoid damage to the hub seal, turn the freehub anti-clockwise as you fit.Material: AlloyUse: MTBPawl: 4-pawlHub Compatibility: Nukeproof Neutron V2Cassette Compatibility: Shimano HG 9, 10, 11 and 12 Shimano HG spline cassettes; SRAM XD SRAM Eagle XD Cassettes or Shimano Microspline Shimano microspline cassettesPoints of Engagement: 36Part Number: Shimano HG Freehub: NUKNEUV236TFHHG; SRAM XD Freehub: NUKNEUV236TFHXD; Shimano Microspline Freehub: NUKNEUV236TFHMSThis freehub is only compatible with Nukeproof Neutron V2 hubsPlease Note: The new hub seal will be fitted to the freehub for transport purposes. This needs to be removed from the freehub by pressing the pawls BEFORE fitting the freehub.Options:Shimano HGShimano MicrosplineSRAM XDIf you have a HG / XD hub and want to convert to microspline, you will need Nukeproof's microspline conversion kit (Part Number: NUKNEUV236MSCONV).Freehub Installation Instructions:Remove drive side end capPull off old freehub turning anticlockwise as you pullCheck hub seal for damage, if it is damaged remove the sealIf seal was removed, press on new sealApply grease hub ratchet ringApply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwiseRefit drive side end cap
The Nukeproof Neutron V2 Freehub Body 36t is designed for use with Nukeproof Neutron V2 hubs.A new hub seal and bushing is supplied with Nukeproof freehubs. To avoid damage to the hub seal, turn the freehub anti-clockwise as you fit. Options: Shimano HG,Shimano Microspline,SRAM XD,.If you have a HG / XD hub and want to convert to microspline, you will need Nukeproof's microspline conversion kit (Part Number: NUKNEUV236MSCONV). Key Features: Material: Alloy,Use: MTB,Pawl: 4-pawl,Hub Compatibility: Nukeproof Neutron V2,Cassette Compatibility: Shimano HG - 9, 10, 11 and 12 Shimano HG spline cassettes; SRAM XD - SRAM Eagle XD Cassettes or Shimano Microspline - Shimano microspline cassettes,Points of Engagement: 36,.This freehub is only compatible with Nukeproof Neutron V2 hubs
Nukeproof Neutron V2 Freehub Body 36tThis freehub body set is designed for use with Nukeproof Neutron V2 hubs. A new hub seal and bushing is supplied with Nukeproof freehubs. To avoid damage to the hub seal, turn the freehub anti-clockwise as you fit.Please Note: The new hub seal will be fitted to the freehub for transport purposes. This needs to be removed from the freehub by pressing the pawls BEFORE fitting the freehub.Options: Shimano HG Shimano Microspline SRAM XD If you have a HG / XD hub and want to convert to microspline, you will need Nukeproof's microspline conversion kit which can be found here. Click here for step by step fitting instructions.FreehubsInstallation Instructions:1. Remove driveside end cap2. Pull off old freehub turning anticlockwise as you pull3. Check hub seal for damage, if it is damaged remove the seal4. If seal was removed, press on new seal5. Apply grease hub ratchet ring6. Apply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwise7. Refit driveside end capFeatures: Material: Alloy Use: MTB Pawl: 4-pawl Hub Compatibility: Nukeproof Neutron V2 Cassette Compatibility: Shimano HG - 9, 10, 11 and 12 Shimano HG spline cassettes; SRAM XD - SRAM Eagle XD Cassettes or Shimano Microspline - Shimano microspline cassettes Points of Engagement: 36 Part Number: Shimano HG Freehub: NUKNEUV236TFHHG; SRAM XD Freehub: NUKNEUV236TFHXD; Shimano Microspline Freehub: NUKNEUV236TFHMS This freehub is only compatible with Nukeproof Neutron V2 hubsBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 Freehub Body 36tThis freehub body set is designed for use with Nukeproof Neutron V2 hubs. A new hub seal and bushing is supplied with Nukeproof freehubs. To avoid damage to the hub seal, turn the freehub anti-clockwise as you fit.Please Note: The new hub seal will be fitted to the freehub for transport purposes. This needs to be removed from the freehub by pressing the pawls BEFORE fitting the freehub.Options: Shimano HG Shimano Microspline SRAM XD If you have a HG / XD hub and want to convert to microspline, you will need Nukeproof's microspline conversion kit which can be found here. Click here for step by step fitting instructions.FreehubsInstallation Instructions:1. Remove driveside end cap2. Pull off old freehub turning anticlockwise as you pull3. Check hub seal for damage, if it is damaged remove the seal4. If seal was removed, press on new seal5. Apply grease hub ratchet ring6. Apply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwise7. Refit driveside end capFeatures: Material: Alloy Use: MTB Pawl: 4-pawl Hub Compatibility: Nukeproof Neutron V2 Cassette Compatibility: Shimano HG - 9, 10, 11 and 12 Shimano HG spline cassettes; SRAM XD - SRAM Eagle XD Cassettes or Shimano Microspline - Shimano microspline cassettes Points of Engagement: 36 Part Number: Shimano HG Freehub: NUKNEUV236TFHHG; SRAM XD Freehub: NUKNEUV236TFHXD; Shimano Microspline Freehub: NUKNEUV236TFHMS This freehub is only compatible with Nukeproof Neutron V2 hubsBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 Freehub Body 36tThis freehub body set is designed for use with Nukeproof Neutron V2 hubs. A new hub seal and bushing is supplied with Nukeproof freehubs. To avoid damage to the hub seal, turn the freehub anti-clockwise as you fit.Please Note: The new hub seal will be fitted to the freehub for transport purposes. This needs to be removed from the freehub by pressing the pawls BEFORE fitting the freehub.Options: Shimano HG Shimano Microspline SRAM XD If you have a HG / XD hub and want to convert to microspline, you will need Nukeproof's microspline conversion kit which can be found here. Click here for step by step fitting instructions.FreehubsInstallation Instructions:1. Remove driveside end cap2. Pull off old freehub turning anticlockwise as you pull3. Check hub seal for damage, if it is damaged remove the seal4. If seal was removed, press on new seal5. Apply grease hub ratchet ring6. Apply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwise7. Refit driveside end capFeatures: Material: Alloy Use: MTB Pawl: 4-pawl Hub Compatibility: Nukeproof Neutron V2 Cassette Compatibility: Shimano HG - 9, 10, 11 and 12 Shimano HG spline cassettes; SRAM XD - SRAM Eagle XD Cassettes or Shimano Microspline - Shimano microspline cassettes Points of Engagement: 36 Part Number: Shimano HG Freehub: NUKNEUV236TFHHG; SRAM XD Freehub: NUKNEUV236TFHXD; Shimano Microspline Freehub: NUKNEUV236TFHMS This freehub is only compatible with Nukeproof Neutron V2 hubsBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
A new hub seal and bushing is supplied with Nukeproof freehubs. To avoid damage to the hub seal, turn the freehub anti-clockwise as you fit. Please Note: The new hub seal will be fitted to the freehub for transport purposes. This needs to be removed from the freehub by pressing the pawls BEFORE fitting the freehub. Options: Shimano HG Shimano Microspline SRAM XD If you have a HG / XD hub and want to convert to microspline, you will need Nukeproof's microspline conversion kit which can be found here. For step-by-step fitting instructions click here. Freehubs: Installation Instructions: 1. Remove driveside end cap 2. Pull off old freehub turning anticlockwise as you pull 3. Check hub seal for damage, if it is damaged remove the seal 4. If seal was removed, press on new seal 5. Apply grease hub ratchet ring 6. Apply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwise 7. Refit driveside end cap
The Nukeproof Neutron V2 Front Wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth-rolling performance on every ride.This front wheel features a Nukeproof Neutron front hub that is available for both 15mm or 20mm spacings in both Boost and non-Boost. Nukeproof also sell end caps for QR (available separately).The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH.Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproofs Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD. Spoke length’s on the front wheels are the same regardless of spacing, the length changes with wheel size: Front 27.5" Wheel: Non-Driveside: 272, Driveside: 273, Front 29" Wheel: Non-Driveside: 291, Driveside: 292,.Conversion kits and replacement end caps available separately. Key Features: Rim Material: 6066 Alloy,Use: MTB, Trail, All Mountain, Enduro and DH,Wheel Size: 27.5" or 29" options available,Spacing Options: 15x100mm, 15x110mm, 20x110mm Non Boost, 20x110mm Boost,Spokes: Spoke Type: J-Bend; Spoke Count: 32; Lacing Pattern: 3x,Disc Mount: 6-bolt,Width: Inner Rim Width: 29mm; External Rim Width: 33mm; Rim Height: 18mm,Tubeless Ready: Yes - Pretaped and valve supplied.
The Nukeproof Neutron V2 Front Wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth-rolling performance on every ride.This front wheel features a Nukeproof Neutron front hub that is available for both 15mm or 20mm spacings in both Boost and non-Boost. Nukeproof also sell end caps for QR (available separately).The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH.Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproofs Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD. Spoke length’s on the front wheels are the same regardless of spacing, the length changes with wheel size: Front 27.5" Wheel: Non-Driveside: 272, Driveside: 273, Front 29" Wheel: Non-Driveside: 291, Driveside: 292,.Conversion kits and replacement end caps available separately. Key Features: Rim Material: 6066 Alloy,Use: MTB, Trail, All Mountain, Enduro and DH,Wheel Size: 27.5" or 29" options available,Spacing Options: 15x100mm, 15x110mm, 20x110mm Non Boost, 20x110mm Boost,Spokes: Spoke Type: J-Bend; Spoke Count: 32; Lacing Pattern: 3x,Disc Mount: 6-bolt,Width: Inner Rim Width: 29mm; External Rim Width: 33mm; Rim Height: 18mm,Tubeless Ready: Yes - Pretaped and valve supplied.
The Nukeproof Neutron V2 Front Wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features a Nukeproof Neutron front hub that is available for both 15mm or 20mm spacings in both Boost and non-Boost. Nukeproof also sell end caps for QR (available separately).Rim Material: 6066 AlloyUse: MTB, Trail, All Mountain, Enduro and DHWheel Size: 27.5" or 29" options availableSpacing Options: 15x100mm, 15x110mm, 20x110mm Non Boost, 20x110mm BoostSpoke Type: J-BendSpoke Count: 32Lacing Pattern: 3xDisc Mount: 6-boltInner Rim Width: 28mmExternal Rim Width: 32mmRim Height: 18mmTubeless Ready: Yes Pre-taped and valve suppliedBuild: Hand builtThe 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH. Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke. The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof s Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.
Nukeproof Neutron V2 Front WheelThis MTB front wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features a Nukeproof Neutron front hub that is available for both 15mm or 20mm spacings in both Boost and non-Boost. Nukeproof also sell end caps for QR (available separately).The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH. Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke. The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproofs Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD. Spoke lengths on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Driveside Spoke Length Driveside Spoke Length Front 27.5" 272 273 Front 29" 291 292 Conversion kits and replacement end caps available separately. Cap Nukeproof Part Number Usage Front 9mm QR NUKNEUV2F9QRCAPS Convert 15mm non boost hub to QR Not compatible with the 20mm non boost hub shell Front 15mm Caps NUKNEUV2F15CAPS Replacement 15mm end caps Not compatible with the 20mm hub shell Front 20mm Caps NUKNEUV2F20CAPS Replacement 20mm end caps Not compatible with the 15mm hub shell Front 15mm Rockshox Torque caps NUKNEUV2ENDB15T Convert 15mm boost hub for Rockshox Torque dropouts Front 20mm to 15mm boost conversion NUKNEUV2END2015B Convert 20mm boost hub to 15mm boost Front 20mm to 15mm non boost conversion NUKNEUV2END2015NB Convert 20mm non boost hub to 15mm non boost Full range of spare parts available. Features: Rim Material: 6066 Alloy Use: MTB, Trail, All Mountain, Enduro and DH Wheel Size: 27.5" or 29" options available Spacing Options: 15x100mm, 15x110mm, 20x110mm Non Boost, 20x110mm Boost Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Disc Mount: 6-bolt Inner Rim Width: 28mm External Rim Width: 32mm Rim Height: 18mm Tubeless Ready: Yes - Pre-taped and valve supplied Single or Pair: Single Build: Hand builtBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 Front WheelThis MTB front wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features a Nukeproof Neutron front hub that is available for both 15mm or 20mm spacings in both Boost and non-Boost. Nukeproof also sell end caps for QR (available separately).The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH. Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke. The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproofs Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD. Spoke lengths on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Driveside Spoke Length Driveside Spoke Length Front 27.5" 272 273 Front 29" 291 292 Conversion kits and replacement end caps available separately. Cap Nukeproof Part Number Usage Front 9mm QR NUKNEUV2F9QRCAPS Convert 15mm non boost hub to QR Not compatible with the 20mm non boost hub shell Front 15mm Caps NUKNEUV2F15CAPS Replacement 15mm end caps Not compatible with the 20mm hub shell Front 20mm Caps NUKNEUV2F20CAPS Replacement 20mm end caps Not compatible with the 15mm hub shell Front 15mm Rockshox Torque caps NUKNEUV2ENDB15T Convert 15mm boost hub for Rockshox Torque dropouts Front 20mm to 15mm boost conversion NUKNEUV2END2015B Convert 20mm boost hub to 15mm boost Front 20mm to 15mm non boost conversion NUKNEUV2END2015NB Convert 20mm non boost hub to 15mm non boost Full range of spare parts available. Features: Rim Material: 6066 Alloy Use: MTB, Trail, All Mountain, Enduro and DH Wheel Size: 27.5" or 29" options available Spacing Options: 15x100mm, 15x110mm, 20x110mm Non Boost, 20x110mm Boost Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Disc Mount: 6-bolt Inner Rim Width: 28mm External Rim Width: 32mm Rim Height: 18mm Tubeless Ready: Yes - Pre-taped and valve supplied Single or Pair: Single Build: Hand builtBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 Front WheelThis MTB front wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features a Nukeproof Neutron front hub that is available for both 15mm or 20mm spacings in both Boost and non-Boost. Nukeproof also sell end caps for QR (available separately).The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH. Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke. The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproofs Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD. Spoke lengths on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Driveside Spoke Length Driveside Spoke Length Front 27.5" 272 273 Front 29" 291 292 Conversion kits and replacement end caps available separately. Cap Nukeproof Part Number Usage Front 9mm QR NUKNEUV2F9QRCAPS Convert 15mm non boost hub to QR Not compatible with the 20mm non boost hub shell Front 15mm Caps NUKNEUV2F15CAPS Replacement 15mm end caps Not compatible with the 20mm hub shell Front 20mm Caps NUKNEUV2F20CAPS Replacement 20mm end caps Not compatible with the 15mm hub shell Front 15mm Rockshox Torque caps NUKNEUV2ENDB15T Convert 15mm boost hub for Rockshox Torque dropouts Front 20mm to 15mm boost conversion NUKNEUV2END2015B Convert 20mm boost hub to 15mm boost Front 20mm to 15mm non boost conversion NUKNEUV2END2015NB Convert 20mm non boost hub to 15mm non boost Full range of spare parts available. Features: Rim Material: 6066 Alloy Use: MTB, Trail, All Mountain, Enduro and DH Wheel Size: 27.5" or 29" options available Spacing Options: 15x100mm, 15x110mm, 20x110mm Non Boost, 20x110mm Boost Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Disc Mount: 6-bolt Inner Rim Width: 28mm External Rim Width: 32mm Rim Height: 18mm Tubeless Ready: Yes - Pre-taped and valve supplied Single or Pair: Single Build: Hand builtBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.