Following three years of research and development, the HUUB Anemoi 2 SUB22 Tri Suit redefines how you choose your race day clothing. The fabrics selected have been tested to ensure excellent drag reduction to make you faster and provide optimal performance. HUUB have selected the ideal fabric for the different speed ranges, meaning you have the quickest suit for your race speed and the SUB22 delivers optimal aerodynamics at speeds under 22mph. Featuring fully bonded seams to enhance comfort and aerodynamics, an Arms Neutral™ design for natural positioning and two rear aero pockets for storage. Arms Neutral™ Set Sleeves HUUB created Arms Neutral to enhance the body position most held during your activity and is a feature originally derived from their wetsuits. The cycling kit sleeves are cut in an arms forward position, to create neutral fabric tension on the body in your most held position.
The standard, Dan Bigham designed Anemoi Aero Plus Tri Suit was created by first working to amass a large collection of race data from a variety of triathletes - short, middle and long course, male and female, and age group up to Olympic champions. This data was then used to dictate the direction of the design, knowing that a small change in the drag force experienced can result in an enhanced and much faster performance. Working to create turbulence only where it is needed and minimising skin friction everywhere else creates an energised boundary layer that can resist changes in curvature and shape around the body. Working through countless prototypes to discover the best fabrics, panel positioning, seam lines and much more, HUUB has managed to design an incredibly aerodynamic suit that works consistently for every rider. These design achievements have been pushed even further with the HUUB Anemoi+ Aero Suit thanks to the introduction of fully bonded seams. Progressing their developments to make you more streamlined and deliver more speed, this latest addition has been tried and tested and was found to make an average saving of 4-watts in comparison to the original suit.
Using the Dave Scott Long Course Triathlon Suit as a benchmark, the starting point for the HUUB Anemoi Aero Suit was to amass a large collection of race data from a variety of triathletes - short, middle and long course, male and female, and age group up to Olympic champions. This data was then used to dictate the direction of the design, knowing that a small change in the drag force experienced can result in an enhanced and much faster performance. Working to create turbulence only where it is needed and minimising skin friction everywhere else creates an energised boundary layer that can resist changes in curvature and shape around the body. Working through countless prototypes to discover the best fabrics, panel positioning, seam lines and much more, HUUB has managed to design an incredibly aerodynamic suit that works consistently for every rider.
The standard, Dan Bigham designed Anemoi Aero Suit was created by first working to amass a large collection of race data from a variety of triathletes - short, middle and long course, male and female, and age group up to Olympic champions. This data was then used to dictate the direction of the design, knowing that a small change in the drag force experienced can result in an enhanced and much faster performance. Working to create turbulence only where it is needed and minimising skin friction everywhere else creates an energised boundary layer that can resist changes in curvature and shape around the body. Working through countless prototypes to discover the best fabrics, panel positioning, seam lines and much more, HUUB has managed to design an incredibly aerodynamic suit that works consistently for every rider. These design achievements have been pushed even further with the HUUB Anemoi+ Aero Suit thanks to the introduction of fully bonded seams. Progressing their developments to make you more streamlined and deliver more speed, this latest addition has been tried and tested and was found to make an average saving of 4-watts in comparison to the original suit.
The HUUB Anemoi Aero Tri Suit brings the science of aerodynamics and passion of triathletes together. The unique Dan Bigham design, with full Neoprene Trip Technology, promotes full flowing movement while the Arms Neutral element adds comfort during the swim. The arms and legs of the suit are lengthened to provide maximum aerodynamic benefit and the lightweight, quick-dry fabric results in an incredibly fast, performance-enhancing tri-suit. The future of the triathlon suit is changing. HUUB noticed this very early on and have decided that the only way to create something great is to rewrite the rule book and change expectations. They knew this couldn’t be done alone, so HUUB brought on an ex Mercedes-AMG Petronas aerodynamic performance engineer going by the name of Dan Bigham. Dan combines his extensive knowledge of aerodynamics to understand what makes a triathlete faster. In addition to this, he’s also an athlete himself. Dan isn’t just about data; he is also passionate about usability and function. As Dan is a national cycling champion and triathlete, he has helped HUUB athletes Alistair Brownlee and David McNamee go faster, not only through positioning and equipment choices but also with the help of the ground-breaking Anemoi Aero Tri Suit. Anemoi Watts & Time Saving Ironman distance: @ 22mph = 7.5W - 350 seconds (just under 6 minutes) Ironman distance: @ 18mph = 4W - 414 seconds (just under 7 minutes) Olympic distance: @ 24mph =9.8W -71seconds Olympic distance: @ 20mph =5.7W -83seconds The Anemoi was compared to the top-selling DS Long Course Tri Suit. Tests were done at a velocity range from 35kph to 55kph on seven different athletes (including Ali Brownlee, David McNamee, Harry Wiltshire and Dan Bigham). Aero benefits can and do vary across riders because of their body shape and position (in the region of ~30% variation), but 15w is an average, seen across every size, shape and speed of the rider.
The idea of using neoprene as a barrier against the cold has been around since 1950's in wetsuits but was only recently adopted for cycling. The theory was; if it can keep you warm in near zero water submersion it can keep your feet warm on the bike. The FS260-Pro Nemo Overshoe proves this theory correct helping keep your feet warm on even some of the coolest dampest days. Superstretch InsulationSuperstretch neoprene is used to ensure a snug fit over your shoes and a stretchy abrasion resistant sole and hard wearing aramid stitching makes this an overshoe that you can be ridden time and time again. High stretch fabrics provide zipperless access Superstretch waterproof thermal neoprene upper MTB and road cleat compatible sole Stretch abrasion resistant sole/heel Hard wearing stitching using aramid thread Reflective Trim Construction Neoprene 90% Nylon 10%
Key Features:Superstretch neoprene outer,Wicking terry inner for insulating warmth,Waterproof fabric with welded construction,Deep cuff overlaps with sleeve,Silicone grip palm print,Reflective trim,E-Swipe touchscreen compatible finger.
Endura FS260-Pro Nemo Glove IIGet out there no matter what is falling from the skies thanks to the fully waterproof, fast-wicking and super comfortable protection of the FS260-Pro Nemo Glove II from Endura.You won’t have trouble finding a time to wear these, and the stretchy fabric used in the outer sections makes them a genuine pleasure to wear as you ride. The welded construction means that that waterproofing works across all areas of the glove, and deeper cuffs are designed to work with sleeves to make sure that not even a single drop gets through. At the palm, silicone prints keep grip at the bar high, wicking terry fabric on the side transfers sweat away before you notice it building up, and conductive thread through the forefinger allow you to use touchscreen devices without taking off the gloves.Features:Material: 90% Neoprene, 10% NylonSuperstretch neoprene outerWicking terry inner for insulating warmthWaterproof fabric with welded constructionDeep cuff overlaps with sleeveSilicone grip palm printReflective trimE-Swipe touchscreen compatible fingerBuy Endura Clothing from Chain Reaction Cycles. The World's Largest Online Bike Store.
Endura FS260-Pro Nemo Glove IIGet out there no matter what is falling from the skies thanks to the fully waterproof, fast-wicking and super comfortable protection of the FS260-Pro Nemo Glove II from Endura.You won’t have trouble finding a time to wear these, and the stretchy fabric used in the outer sections makes them a genuine pleasure to wear as you ride. The welded construction means that that waterproofing works across all areas of the glove, and deeper cuffs are designed to work with sleeves to make sure that not even a single drop gets through. At the palm, silicone prints keep grip at the bar high, wicking terry fabric on the side transfers sweat away before you notice it building up, and conductive thread through the forefinger allow you to use touchscreen devices without taking off the gloves.Features:Material: 90% Neoprene, 10% NylonSuperstretch neoprene outerWicking terry inner for insulating warmthWaterproof fabric with welded constructionDeep cuff overlaps with sleeveSilicone grip palm printReflective trimE-Swipe touchscreen compatible fingerBuy Endura Clothing from Chain Reaction Cycles. The World's Largest Online Bike Store.
Endura FS260-Pro Nemo Glove IIGet out there no matter what is falling from the skies thanks to the fully waterproof, fast-wicking and super comfortable protection of the FS260-Pro Nemo Glove II from Endura.You won’t have trouble finding a time to wear these, and the stretchy fabric used in the outer sections makes them a genuine pleasure to wear as you ride. The welded construction means that that waterproofing works across all areas of the glove, and deeper cuffs are designed to work with sleeves to make sure that not even a single drop gets through. At the palm, silicone prints keep grip at the bar high, wicking terry fabric on the side transfers sweat away before you notice it building up, and conductive thread through the forefinger allow you to use touchscreen devices without taking off the gloves.Features:Material: 90% Neoprene, 10% NylonSuperstretch neoprene outerWicking terry inner for insulating warmthWaterproof fabric with welded constructionDeep cuff overlaps with sleeveSilicone grip palm printReflective trimE-Swipe touchscreen compatible fingerBuy Endura Clothing from Chain Reaction Cycles. The World's Largest Online Bike Store.
Endura FS260-Pro Nemo Glove IIGet out there no matter what is falling from the skies thanks to the fully waterproof, fast-wicking and super comfortable protection of the FS260-Pro Nemo Glove II from Endura.You won’t have trouble finding a time to wear these, and the stretchy fabric used in the outer sections makes them a genuine pleasure to wear as you ride. The welded construction means that that waterproofing works across all areas of the glove, and deeper cuffs are designed to work with sleeves to make sure that not even a single drop gets through. At the palm, silicone prints keep grip at the bar high, wicking terry fabric on the side transfers sweat away before you notice it building up, and conductive thread through the forefinger allow you to use touchscreen devices without taking off the gloves.Features:Material: 90% Neoprene, 10% NylonSuperstretch neoprene outerWicking terry inner for insulating warmthWaterproof fabric with welded constructionDeep cuff overlaps with sleeveSilicone grip palm printReflective trimE-Swipe touchscreen compatible fingerBuy Endura Clothing from Chain Reaction Cycles. The World's Largest Online Bike Store.
Endura FS260-Pro Nemo Glove IIGet out there no matter what is falling from the skies thanks to the fully waterproof, fast-wicking and super comfortable protection of the FS260-Pro Nemo Glove II from Endura.You won’t have trouble finding a time to wear these, and the stretchy fabric used in the outer sections makes them a genuine pleasure to wear as you ride. The welded construction means that that waterproofing works across all areas of the glove, and deeper cuffs are designed to work with sleeves to make sure that not even a single drop gets through. At the palm, silicone prints keep grip at the bar high, wicking terry fabric on the side transfers sweat away before you notice it building up, and conductive thread through the forefinger allow you to use touchscreen devices without taking off the gloves.Features:Material: 90% Neoprene, 10% NylonSuperstretch neoprene outerWicking terry inner for insulating warmthWaterproof fabric with welded constructionDeep cuff overlaps with sleeveSilicone grip palm printReflective trimE-Swipe touchscreen compatible fingerBuy Endura Clothing from Chain Reaction Cycles. The World's Largest Online Bike Store.