Tool for removing the bearing from the crank spindle on Campagnolo cranks.
Pin Tool for Remove/Replace Lefty Cap on Cannondale Lefty Hubs.
This tool set is designed to fully service DT Swiss hubs and other hub manufacturers that utilize DT Swiss hub internals. The set includes all the bearing guide sizes for front and rear hubs, two low-drag silicone freehub seals and a high-quality, ratchet removal tool.
The ABEC3 698 LLU Max raises the bar for military standard, high precision bearings. This MAX model was engineered without retainers and 40% more balls than standard ABEC 3 or 5 bearings, enabling them to carry a much higher load and perfect for frame pivots. This bearing is packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last longer than ever before. Technologies: LLU Seals: Two NBR 70 rubber seals with medium/high contact seal, which rides in a matching groove machined into the bearing to make a labyrinth type seal. The outer sealing lip repels dirt and water while the inner sealing lip retains the grease. CRC Sta-Plex Marine: This grease will not wash out or break down under any extreme conditions including power washing, salt water intrusion from the salted roads, or even dirt getting into the rolling areas. The High Pressure properties of this grease provides a cushion for the sharp blows that suspension pivots will endure. Tough and Tenacious for high impact and extreme conditions.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Bearing Code: F6802 LLU MAX-E BO, Dimensions: 15 x 24/26 x 5/7mm, ABEC: 3, Grade: 10, Seals: LLU, Grease: CRC Marine, Application: Frame Pivots , .
Enduro fork seals provide increased sealing with reduced drag and friction, and are the perfect upgrade for your fork. Durable Polyurethane dual-lip seals are super quiet and will last longer than any stock seals.Kit includes: 2x Oil Seals, 2x Wiper Seals, .
The Enduro HyGlide hybrid seals combine the best of both worlds, oil retention and dirt/debris rejection. This design provides world-class performance in a long-lasting seal and delivers smooth action throughout the entire travel of the fork. This unique design joins the oil seal and wiper into a single unit, creating an ideal fork seal.The integrated top wiper is produced using a specific formulated polyurethane material, rather than a rubber compound that many fork seal manufacturers use. Our poly wiper/seal is a proper wiper keeping dirt and the elements out. In testing it is 300% more effective than a rubber wiper with garter spring used by many leading seal manufacturers. The co-molded oil seal below is made from Polyacrilate, the perfect material for the extreme operating temperatures and high pressures. The oil seal is also infused with MOS2 (Molybdenum Disulphide), a dry lubricant similar to graphite. While this is is the optimal material for the oil seal, it is separate in its duties from the upper wiper and is the reason for combining materials in to one hybrid seal.This cold-fused design allows the elimination of 1 sealing lip and further decreases the friction or “stiction” as referred to regarding fork movement. Between the two sealing lips, we have designed a large cavity area to hold lubricant to again prevent contamination and easy movement of the reciprocating fork producing more active suspension.With superior sealing action and cleaner fork lowers, your fork service intervals can be increased we find by 2 or 3 times compared to what the OE recommends. The HyGlide integrated wiper and oil seal provide much easier installation. No more fussing with a very thin lower seal that is fragile and easily bent when trying to install.
Raising the bar for military standard, high precision bearings, some of the finest cycling components come standard with the Enduro Bearings MR 18307 bearing. It features hardened chromium steel races, balls, and tough riveted steel retainers, for a durable and perfect low-cost performance upgrade. Technologies: LLB Seals: Two NBR 70 rubber seals with a low contact seal, which rides in a matching groove machined into the bearing for low drag or friction. Mobile HP 222: This grease is another high pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.
MAX berings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.Key Features:Bearing Code: KP 5A,Dimensions: 5/16" x 13/16" x 9/32",ABEC: 3 ,Grade: 10,Seals: LLU,Grease: CRC Marine,Application: Frame Pivots,Weight: 9.69g.
MAX berings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.Key Features:Bearing Code: KP 6A,Dimensions: 3/8" x 7/8" x 5/16",ABEC: 3 ,Grade: 10,Seals: LLU,Grease: CRC Marine,Application: Frame Pivots,Weight: 9.69g.
The entry standard for Enduro bearings. Enduro's ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro's ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgradeBearing Code: MR 1526,Dimensions: 15 x 26 x 7mm,ABEC: 3 ,Grade: 10,Seals: LLB,Grease: Mobile HP 222,Application: Hubs, Bottom Brackets,Weight: 11.20g.
MAX berings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Bearing Code: MR 1526, Dimensions: 15mm x 26mm x 7mm, ABEC: 3, Grade: 10, Seals: LLB, Grease: CRC Marine, Application: Frame Pivots, Weight: 12.95g , .