Don't be fooled by the title, Enduro have been producing bearings since before the word "Enduro" became fashionable, there bearings are an industry leading design and they set the standard for all other bearing manufacturers to match. You may be more familiar with the ABEC standards from the worlds of skateboarding and roller blades but Enduro have tailored their bearings for the specific demands of cycling. The entry level industry standard of a bearing is ABEC 1 but Enduro do not produce any bearing which comes in at less than ABEC 3, this means that even if you choose an entry level Enduro bearing it is of better quality than another manufacturers entry level bearing.These standard ABEC3 MAX bearings are designed for use within linkages on full suspension frames, they have 40% more balls compared to standard ABEC3/5 bearings which gives unparalleled levels of smooth linkage movement when the frame is compressed.
Don't be fooled by the title, Enduro have been producing bearings since before the word "Enduro" became fashionable, there bearings are an industry leading design and they set the standard for all other bearing manufacturers to match. You may be more familiar with the ABEC standards from the worlds of skateboarding and roller blades but Enduro have tailored their bearings for the specific demands of cycling. The entry level industry standard of a bearing is ABEC 1 but Enduro do not produce any bearing which comes in at less than ABEC 3, this means that even if you choose an entry level Enduro bearing it is of better quality than another manufacturer's entry level bearing.These standard ABEC 3/5 bearings are designed for use within bottom brackets or hubs and give outstanding performance and longevity to your components.
Enduro Bearings ABEC3 63802 2RS BearingGiving a dependable and durable performance when paired with your hubs and bottom brackets, this hard-working bearing uses military-grade materials to keep you running smoothly. Commonly found on most modern bikes, it features hardened chromium steel races, balls, and tough riveted steel retainers, as well as Mobile HP 222 to keep an efficient, well-lubricated form. Features: Dimensions: 15x24x7mm ABEC: 3 Grade: 10 Seals: 2RS Grease: Mobile HP 22 Application: Hubs, Bottom Brackets Weight: 6.71g Buy Enduro Bearings Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Key Features: Bearing Code: 63800,Dimensions: 10mm x 19mm x 7mm,ABEC: 3 ,Grade: 10,Seals: LLB,Grease: CRC Marine,Application: Frame Pivots,Weight: 7.10g.
EnduroGuard is compact lightweight and highly effective at stopping mud and spray blurring your vision. It’s versatile design fits both the front and rear of the bike and is perfect for any mountain bike discipline. Manufactured from a custom thickness Polypropylene EnduroGuard is extremely durable and offers a superb fit. Unlike other guards of this kind EnduroGuard features SealGuard which helps prevent mud and water sitting on your fork seals helping to prolong their life and service intervals. Available in 2 sizes and 12 colours Standard size - Fits forks from 80mm to 120mm. Ideal for 4X Cross County and short travel trail bikes. Large size - Fits forks from 130mm to 200mm. Ideal for Gravity Enduro and Downhill bikes. Versatile design allows for front and rear fitment Seal Guard Technology to keep seals clean Supplied with bright white zip ties Design manufactured and packaged in the UK. New features on V4 model include; Turndown front spray flap adds spray protection Stealthier graphics with black laquer on black material Additional snap-off holes for BOOST forks Additional snap-off holes for reverse arch forks (Manitou/DVO) Width of guard and Seal Guard increased to be compatible with BOOST forks ENDUROGUARD logo replaced with RAPID RACER PRODUCTS logo
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.Key Features: Bearing Code: 6804, Dimensions: 20 x 32 x 7mm, ABEC: 3, Grade: 10, Seals: LLB, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 17.19g.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.Key Features: Bearing Code: 608 LLU MAX-E, Dimensions: 8 x 22 x 7/10", ABEC: 3, Grade: 10, Seals: LLB, Grease: CRC Marine, Application: Frame Pivots, Weight: 12.69g.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.Key Features: Bearing Code: 6900, Dimensions: 10mm x 22mm x 6mm, ABEC: 3, Grade: 10, Seals: LLU, Grease: CRC Marine, Application: Frame Pivots, Weight: 9.45g.
MAX berings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.Bearing Code: 6802,Dimensions: 15mm x 24mm x 5mm,ABEC: 3 ,Grade: 10,Seals: LLU,Grease: CRC Marine,Application: Frame Pivots,Weight: 6.83g.
The entry standard for Enduro bearings. Enduro's ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro's ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgradeBearing Code: MR 1526,Dimensions: 15 x 26 x 7mm,ABEC: 3 ,Grade: 10,Seals: LLB,Grease: Mobile HP 222,Application: Hubs, Bottom Brackets,Weight: 11.20g.
Enduro's ABEC 5 is the next performance step up from the popular ABEC 3 range. By using military level, high precision HRC-64 hardended Grade 5 Chromium Steel Balls, and 52100 High-Carbon Chromium-Alloy mirror polished races. This combination allows Enduro's ABEC 5 bearings to use tolerances twice as tight as ABEC 3, and operate without any noise. The Graphite/Nylon ball retainers allow virtually frictionless movement and provide constant lubrication to maximise the life of the bearing.Key Features: Bearing Code: 7902 (71902),Dimensions: 15mm x 28mm x 7mm,ABEC: 5,Grade: 5,Seals: LLB,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 15.00g.
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.Key Features: Bearing Code: 6202, Dimensions: 15 x 35 x 11mm, ABEC: 3, Grade: 10, Seals: 2RS, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 30.25g .