Removable mudguard bridge for the Ribble Endurance SL e carbon e-road bike.This mudguard bridge offers a low-profile alternative to a permanent bridge and can simply be removed when mudguards aren't fitted. The bridge sits between the seat stays and provides a secure fit to keep the rear guard safely away from the tyre.Lightweight, 3D printed designSimple to fit, and easy to remove
Removable Mudguard Bridge for Endurance SL eSimple and easy to use - This mudguard bridge mounts in seconds and enables full coverage mudguards to be mounted exclusively to the Endurance SL e, e-road bike for enhanced protection from the elements. Lightweight, 3D printed designSimple to fit, and easy to removeCompatible with the Endurance SL e, e-road bike only.
Post fit extenders for the FRX and Shorty Mudhugger Simple to fit and can be removed when not needed. Weight approx 16g Wheel Size: 26/29 Colour: Black Material: Plastic
Designed and made in the UK from 100% recycled black polypropylene. Following the tried and tested tyre hugging design of our MTB Mudhuggers the GravelHugger is designed to fit most fork + wheel + tyre combo's for your Gravel Bikes. To reduce single use plastic waste, and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Suitable for 700c (Max tyre width 42mm) and 650b wheels (Max tyre width 50mm) depending on wheel/tyre/fork combination. Zipties (sold separately) can be utilised if you'd prefer to fit and leave on at all times. Helitape supplied to protect inside of forks where the GravelHugger could scratch the paint. Weight: approx 70g (without fittings) - Length 490mm - width 60mm
We've had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB (not compatible with 38mm offset ZEB) and new Domain to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for ZEB, see options) but still compatible with older (2017) onwards FOX forks 34 (not 2022 version or Step Cast though) and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Minimum fork offset- 44mm Also compatible with Ohlins RXF and DH forks (adapter bracket required) Compatible with RS RECON GOLD & SLIVER 35. Use the angle adjuster shim included in the default fitting kit along with the 6mm bolt (sold separately) see link above. PLEASE NOTE - For all Downhill forks (not compatible with older 650b FOX 40's) see the option for DH. You will still need to order the separate adapter for Ohlins DH forks. Length - 390mm total - Rear extension 255mm, front extension 105mm Weight - 100g, without fittings.
Length 390mm - Rear extension 255mm, front extension 105mm. Width - 90mm Weight 100g, without fittings. Supplied with 4 zipties to install on your forks. We've had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost. For Manitou Mezza (and similar reverse fork arch forks) you will need to drill 4 small holes to align with the reverse fork brace. More mud clearance. No more crown fouling at full compression. Stiffer. Optimum length, not too short, no longer than needed. Subtle kicker to keep length as short as possible without compromising spray protection. Strong enough for DH racing at the highest level. 100% recycled PP. Designed, made and packed in the UK.
Don't be fooled by the name, the EnduroGuard isn't just for Enduro riders as there is a size to suit everybody's riding style. The EnduroGuard has a unique shape as it works on the front or rear of your bike without the need to modify it and as it wraps around either the arch of your forks or seat stays it will keep the mud out of your eyes as well as off your back or posterior. The EnduroGuard is available in 5 eye catching colours to colour match to your bike and riding apparel.Standard: Fits forks with 80 to 120mm travelLarge: Fits forks with 130 to 200mm of travel
Don't be fooled by the name, the EnduroGuard isn't just for Enduro riders as there is a size to suit everybody's riding style. The EnduroGuard has a unique shape as it works on the front or rear of your bike without the need to modify it and as it wraps around either the arch of your forks or seat stays it will keep the mud out of your eyes as well as off your back or posterior. The EnduroGuard is available in 5 eye catching colours to colour match to your bike and riding apparel.Standard: Fits forks with 80 to 120mm travelLarge: Fits forks with 130 to 200mm of travel
Sometimes, the Mucky Nutz Face Fender doesn't quite offer enough protection from mud flying from your front wheel. Enter the Mucky Nutz MudGuard which is designed for bigger, closer coverage, while retaining the sleek look and easy fitting of the legendary Face Fender.Designed to offer better coverage with elongated, 3D shape and recessed bridge area for more tyre clearanceWide upper arm profile protects fork seals and stanchions from dirt & mudCompatible with most suspension forks and 26 , 27.5 & 29 wheel sizes and tyres up to 3 Incredibly easy to fit with supplied Velcro rol, just like the original Face FenderShort Mudguard is 400mm long, Long MudGuard is 600mm for additional coverageAs Mucky Nutz' first entry in the 3D fender market, they wanted to ensure they got it right. The MudGuard has been designed as a fully functional and sharp-looking piece of kit, that keep and mud and spray out of your face, even in the worst conditions. The MudGuard is compatible with most suspension forks, including Boost axle-spacing models and is suitable for 26 , 27.5 & 29 wheels and up to 3 tyres. Safe to say it has the ever-changing industry wheel/tyre size standards under control then! The Guard itself features a forward lip to minimise spray, along with a sharp trailing edge to cut cloggy soil away from your tyre. Despire this and the closer fit, the recessed bridge area means you'll still have plenty of tyre clearance. The wide upper arm profile is also designed to keep mud and dirt away from your fork seals and stanchions, keeping them cleaner and prolonging intervals between services. The MudGuard fits in seconds with the supplied Velcro roll, just like the original Face Fender. Another trait it shares with the Face Fender is the multitude of fastening slots, giving you a wide range of adjustment for different forks, as well as as the possibility of using it as a rear mudguard on some full suspension bikes. With the Short version weighing just 75g, the MudGuard is also super light. Offering excellent coverage and a versatile fitting system, the Mucky Nutz MudGuard is a worthy addition to their range for when you need maximum protection from mud & spray in the worst conditions.
M Parts Primo Mudguards are a top choice for riders who want great value, reliable full length mudguards that are built to last.3.2mm stainless steel stays are highly durable and are quick and easy to assemblePolycarbonate guard material is incredibly tough and virtually unbreakableSupplied with all the fittings you needApproximately 520g including fittingsIncredibly easy to fit, the Primo Mudguards come with durable stainless steel stays that are a breeze to install, so you can have them fitted in mere minutes. Keeping the elements away are the massively strong polycarbonate guards, which are incredibly tough and virtually unbreakable; they're certainly not afraid of taking abuse from the daily commute! Supplied with all you'll need to get going, the M Part Primo Guards are tough, versatile and incredible value.
Designed for bikes with mudguard eyelets, the M Part QF Mudguards offer excellent coverage in an incredibly quick and easy to fit package. The clever design allows you to remove the fenders and stays quickly when the rain clears.Suit for bikes with eyelets and 700c tyres up to 28mm wideFenders and stays can be quickly removed if the rain clears3.2mm stainless steel stays are highly durable and are quick and easy to assemblePolycarbonate guard material is incredibly tough and virtually unbreakableRubber tail helps to protect riders behind youIncredibly easy to fit, the fenders and stays can be quickly removed, perfect for the rare occasions the sun makes an appearance in winter! The durable stainless steel stays and fittings are incredibly durable and will shrug off the worst the winter weather can throw at them. Keeping the elements away are the massively strong polycarbonate guards, which are incredibly tough and virtually unbreakable; they're certainly not afraid of taking abuse from the daily commute! Supplied with all you'll need to get going, the M Part QF Guards are tough, versatile and incredible value.
The new RoadRacer MK 3 Mudguard Set are the perfect accessory to get you through the winter months and typical wet UK weather. They can now accommodate tyres up to 38c and they fit most 700c bikes including disc and caliper brakes.Road Racer MK3 fits almost any brand of road bike with tyres up to 700x38cSuper Strong Duotec Interlock fixing system for trouble free attachment to your bike, no tools needed!Suits all brake systems - discs and cantisDoes not require mudguard eyelets to be present on your framePerfect for all road, gravel and trekking bikesThese mudguards will fit most road, gravel and trekking bikes, disc brake or caliper and use a strong duotec interlock fixing system for trouble free easy installation. Best of all is that you don t need any tools to install these mudguards. Finally, these mudguards don t require your bikes frame to have eyelets.