The Ass Savers Ass Saver Mudder Regular Fork Guard takes the typical Ass Savers minimalist approach and weighs a tiny 18g. The Mudder mounts with an unobtrusive design and hugs the tyre with adjustable deflectors so virtually no mud will pass and spray in your face.
The Mudder Mini offers minimal interference while protecting what is important. The Detour edition of Mudder Mini has also been given an upgraded material thickness for sturdiness. Key Features: Protecting face and headset bearings, Mounts easy and securely with antislip straps , Fits all stiff cross/gravel forks, Super lightweight, only 21 grams, Keeps spray from you handlebar bags,.The Mudder Mini offers minimal interference while protecting what is important. Not only is your headset and face protected but it will also do a very good job of keeping your handlebar bag clean and dry. The Detour edition of Mudder Mini has also been given an upgraded material thickness for sturdiness.Most bikepacking gear is not 100% waterproof and a good set of fenders can save you from the misery of having a wet sleeping bag or clothes at the end of the day. Even if your gear is fully waterproof, you will appreciate the lack of mud on your bags when you stop to get a jacket out or when you bring them into the tent after a rough day in the saddle. The full kit adds less than 85 grams to your total weight, making it ideal for ultralight bikepacking. Specification: Measures: 90 x170 mm (effective), Weight: 21 g , Material: 0.8 mm PP (Polypropylene),. Fit: The MUDDER Mini will fit all gravel/cx forks with clearance for tire widths between 32 mm up to 55 mm. It will not work on a road fork with narrow clearance or for fat bikes. The correct position is about 10 mm above the tire. Aligning the position to the tire and not the fork crown increases efficiency and is made possible by our custom hook and loop straps. Make sure that the mudguard doesn't touch your down tube when turning the handlebar. Purpose: This mudguard is specifically designed to block dirt from being thrown forward and potentially impair your vision during high speed riding and the wellness of your lower headset bearings. It will not protect you from general spray coming from your front tire or your feett and lower legs. Adjustable anti-slip 2-in-1 hook and loop straps: The specially designed straps have enough friction to prevent the mudguard from sliding down on a conic fork leg. However, it needs to be tighten firmly to stay up. The open ended design of the strap will allow you to adjust the length and thereby center the position of the ASS SAVERS logo on the fork leg. You can also inverse the strap if you prefer to have a no-logo appearance. Pre-folding: The secret to transforming a flat piece of plastic into a functioning product lies in the pre-folding prior to use. All the scoring lines have been carefully engineered to achieve locking mechanisms, self centering abilities, spring loading and material endurance. Please take the time to properly read the instructions to ensure the best performance.
As the gravel segment expands, cyclists face new challenges. The issue of having dirt thrown in your face is a well known problem among mountain bikers. With huge clearances for wide tires in the front fork, gravel riders are now facing a similar issue."This one is a win for sure. ...it seems to outperform every other mini front fender I have tried." Cory Benson, BikerumorWhile mountain bikers are used to mud, gravel bikers face a different challenge. Anyone who has ridden on a wet gravel road is familiar with the mixture of fine sand and water that seems to be designed especially to seek and destroy bearings, not to mention what it does to your eyes on a long ride.The MUDDER Mini is here to offer relief for your face and headset bearing. Simply mount it to your fork legs just above your front tire and you will dramatically reduce the amount of spray in the critical areas. The MUDDER Mini attaches with innovative adjustable anti-slip straps to guarantee an instant and perfect fit on all fork sizes.Protecting face and headset bearings,Mounts easy and securely with antislip straps ,Fits all cross/gravel forks,Super lightweight, only 21 grams,Suitable for tire widths 32-55 mm,.Key Features:Technical data,Measures: 90 x170 mm (effective),Weight: 21 g ,Material: 0.8 mm PP (Polypropylene),.Fit The MUDDER Mini will fit all gravel/cx forks with clearance for tire widths between 32 mm up to 55 mm. It will not work on a road fork with narrow clearance or for fat bikes. The correct position is about 10 mm above the tire. Aligning the position to the tire and not the fork crown increases efficiency and is made possible by our custom hook and loop straps. Make sure that the mudguard doesn't touch your down tube when turning the handlebar.Purpose This mudguard is specifically designed to block dirt from being thrown forward and potentially impair your vision during high speed riding and the wellness of your lower headset bearings. It will not protect you from general spray coming from your front tire or your feet and lower legs.Adjustable anti-slip 2-in-1 hook and loop straps The specially designed straps have enough friction to prevent the mudguard from sliding down on a conic fork leg. However, it needs to be tighten firmly to stay up. The open ended design of the strap will allow you to adjust the length and thereby center the position of the ASS SAVERS logo on the fork leg. You can also inverse the strap if you prefer to have a no-logo appearance. Pre-folding The secret to transforming a flat piece of plastic into a functioning product lies in the pre-folding prior to use. All the scoring lines have been carefully engineered to achieve locking mechanisms, self centering abilities, spring loading and material endurance. Please take the time to properly read the instructions to ensure the best performance.
The purpose of the MUDDER is to keep your eyes muck-free as you go full speed down that dirtbag of a trail that you love so much. Chances are, that thanks to MUDDER, you're also not having flying mud for lunch. Key Features: Deflectors increase efficiency, Easy to mount with included zipties , Fits all suspension forks with a fork bridge, Super lightweight, only 18 grams, Suitable for all wheel sizes,.The purpose of the MUDDER Regular is to keep your eyes muck-free as you go full speed down that dirtbag of a trail that you love so much. Chances are, that thanks to MUDDER, you’re also not having flying mud for lunch.In true Ass Savers spirit, we’ve taken the minimalist approach with some added clever thinking. The result is a fork mounted front mudguard with an unobtrusive design and unsurpassed efficiency when it comes to keeping your face free from dirt. The design features innovative tire-hugging deflectors that can be adjusted so virtually no mud will pass. Specification: Measures: 237 x 154 mm, Weight: 18 g , Material: 0.8 mm PP (Polypropylene),. Fit: The MUDDER will fit all standard front suspension forks with wheel sizes between 26" to 29". If you have a fork with an inverted fork bridge, like DT Swiss or Magura, then it won't fit without modifications. Purpose: This mudguard is specifically designed to block dirt from being thrown forward and potentially impair your vision during high speed trail riding. It will not protect you from general spray coming from your front tire. No-Mud-Shall-Pass flaps : The flaps at the front of the MUDDER is designed to be folded down towards the tire for even better protection. Depending on your tire clearance they may be folded very little or very much. Pre-folding: The secret to transforming a flat piece of plastic into a functioning product lies in the pre-folding prior to use. All the scoring lines have been carefully engineered to achieve locking mechanisms, self centering abilities, sprinng loading and material endurance. Please take the time to properly read the instructions to ensure the best performance.
Ass Savers Mudder Regular Front MudguardProtect yourself from dirt and grime when tackling tough mountain trails, with this Regular Front Mudguard from Ass Savers.Taking the typical Ass Savers minimalist approach, the Mudder Regular Fork Guard weighs a tiny 18g. The Mudder mounts with an unobtrusive design and hugs the tyre with adjustable deflectors so virtually no mud will pass and spray in your face.Features: Deflectors increase efficiency Fork Compatibility: Fits all suspension forks with a fork bridge Wheel Size: Suitable for all-wheel sizes Weight: 18gBuy Ass Savers Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudder Trucker HatWhether keeping the sun from your eyes or adding a style spin to your off-duty look, the Mudder Trucker Hat from The North Face is an essential for all casual adventures.A classic trucker design from The North Face, the Mudder Trucker Hat has been made from rugged cotton canvas with a polyester mesh backing and boasts a stylish vintage wash with an adjustable finish.Features:Rugged canvas in a vintage washAdjustable snapbackMesh backingMain: 100% cotton; Lining: 100% polyesterBuy The North Face from Chain Reaction Cycles, the World's Largest Online Bike Store.