Traditional mudguards are fragile and can hold on to pounds of unwanted mud affecting your riding performance and slowing you down. The NeoGuard™ throws the mud off every time the fork compresses keeping your bike light and agile. It is fast and simple to fit and very lightweight, this mudguard is perfect for both downhill or crosscountry and absolutely essential for the weekend warrior. Tuck it into your backpack just in case conditions turn nasty, you'll rarely get mud in your eyes again.
RapidRacerProducts ProGuard Bolt On Front MudguardThe Bolt On Front Mudguard from RapidRacerProducts is a direct-mount mudguard that holds in place without the need for velcro or zip-ties and is compatible with all main suspension fork designs. What's more, it offers exceptional protection from unwanted spray when hitting the trails. Perfect Mudguards for Enduro, Downhill and Trail RidingThis mudguard design is perfectly suited for the rigours of modern mountain biking. It ensures superb all-weather protection for anything from Enduro and Downhill racing, to weekend Trail sessions with friends. And, since it’s made from RapidRacerProducts’s unique polypropylene, it gives a superbly flexible and ultra-durable performance at a low weight.Superb Protection from Mud and SprayOffering high protection with a superbly reliable construction, this mudguard is available in two sizes that are suited to all riding styles and weather and terrain situations. The Standard offers optimum levels of protection from mud and spray, whereas the Mini provides good protection in a low-profile and more discreet package. Plus, their wide design and longer rear with its flick section ensure spray protection even when cornering hard and when in the air. These guards also feature a Seal Shield to protect your fork seals by keeping dirt away from this area. This means your forks perform better for longer and will not require servicing as often, so you can spend more time on the trails and less time in the workshop.Features:Material: RapidRacerProducts unique polypropylene mix which gives great flexibility, durability and strengthEasy to install or remove with no zip ties or Velcro strapsHeight adjustability by 6mm and angle adjustability for a better fit if needed via 2 tilt brackets supplied2 Thick rubber pads on the sides protect your forksMatte textured finish with gloss highlights, plus sticker recess for easy fit and sticker protectionLong front to protect from high-speed mud and spraySmaller turn down at the front for better tyre clearance and to reduce mud blockagesLong rear with flick design offers more protection especially during corneringSeal Shield increases protection and extends fork service intervalsWheel Compatibility: 26” 27.5” 29”Tyre Compatibility: up to a 3” tyreWeight: Standard: 130g; Mini: 104gFork Compatibility:FOX 32, 34, 36, 49 - Std & Boost (not FOX 40 in 26” or 27.5” without adapter bracket)New Marzocchi forks (using the FOX chassis)Ohlin's forksSR Suntour (models with unthreaded straight through the hole in the fork brace require a Sleeve Pack to mount ProGuard BOLT-ON Click Here)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts ProGuard Bolt On Front MudguardThe Bolt On Front Mudguard from RapidRacerProducts is a direct-mount mudguard that holds in place without the need for velcro or zip-ties and is compatible with all main suspension fork designs. What's more, it offers exceptional protection from unwanted spray when hitting the trails. Perfect Mudguards for Enduro, Downhill and Trail RidingThis mudguard design is perfectly suited for the rigours of modern mountain biking. It ensures superb all-weather protection for anything from Enduro and Downhill racing, to weekend Trail sessions with friends. And, since it’s made from RapidRacerProducts’s unique polypropylene, it gives a superbly flexible and ultra-durable performance at a low weight.Superb Protection from Mud and SprayOffering high protection with a superbly reliable construction, this mudguard is available in two sizes that are suited to all riding styles and weather and terrain situations. The Standard offers optimum levels of protection from mud and spray, whereas the Mini provides good protection in a low-profile and more discreet package. Plus, their wide design and longer rear with its flick section ensure spray protection even when cornering hard and when in the air. These guards also feature a Seal Shield to protect your fork seals by keeping dirt away from this area. This means your forks perform better for longer and will not require servicing as often, so you can spend more time on the trails and less time in the workshop.Features:Material: RapidRacerProducts unique polypropylene mix which gives great flexibility, durability and strengthEasy to install or remove with no zip ties or Velcro strapsHeight adjustability by 6mm and angle adjustability for a better fit if needed via 2 tilt brackets supplied2 Thick rubber pads on the sides protect your forksMatte textured finish with gloss highlights, plus sticker recess for easy fit and sticker protectionLong front to protect from high-speed mud and spraySmaller turn down at the front for better tyre clearance and to reduce mud blockagesLong rear with flick design offers more protection especially during corneringSeal Shield increases protection and extends fork service intervalsWheel Compatibility: 26” 27.5” 29”Tyre Compatibility: up to a 3” tyreWeight: Standard: 130g; Mini: 104gFork Compatibility:FOX 32, 34, 36, 49 - Std & Boost (not FOX 40 in 26” or 27.5” without adapter bracket)New Marzocchi forks (using the FOX chassis)Ohlin's forksSR Suntour (models with unthreaded straight through the hole in the fork brace require a Sleeve Pack to mount ProGuard BOLT-ON Click Here)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The ProGuard Hook and Loop Straps from RapidRacerProducts are Hook and Loop straps to quickly attach and remove Proguard V2 mudguard to your bike.
RapidRacerProducts ProGuard Max Front MudguardShield yourself from unwanted dirt and spray when tackling tough terrain thanks to the ProGuard Max Mudguard from RapidRacer. The Max model features a longer coverage length of 21mm at the front and 68mm at the back to help you stay mud-free. Features:Indent at fork brace for additional clearance24 crown holes for a massive range of mounting optionsCan be used with any fork travel6x Zip Ties included with each guardWheel Compatibility: 26", 27.5", 29"Tyre Compatibility: Up to 3" widthFork Compatibility: All forks including Boost (reverse arch forks not compatible)Weight: 133g (guard only)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Flexible and Durable Mudguard Made from polypropylene, the Proguard Max Mudguard is excellent in cold weather and can withstand impact due to its innate flexibility and durability. Maximum Protection RapidRacerProducts offers the best protection in the world, this version is 68mm longer at the rear. No other mudguard offers more protection. Indent A mudguard tracking close to the tyre can offer great mud and spray protection but often at the cost of mud clogging and slowing the rider down, a mudguard that sits high off the tyre is conversely going to offer less protection so a compromise is needed. Long Front The front has been made longer - 21mm longer - than some available offerings as this is an area that can significantly improve the protection of the face and eyes when riding at high speed. The turn down at the front deflects the spray downwards without clogging with mud which causes blockages. Snap-off Hole Covers Hole covers have been added to reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screw driver to push the cover out leaving it clear for the zip tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including Boost forks (except reverse arch), this allows you to customise your fit. Rear Flick The rear flick was designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned. Seal Guard RapidRacerProducts' widely acclaimed Seal Guard has made it to the Proguard Max Mudguard as a means of offering greater protection for your seals from high velocity mud and spray, the Seal Guard section also provides additional strength and rigidity to the rear reducing flex.
RapidRacerProducts ProGuard Rear MudguardSuper-protective against the mud, muck and spray of the enduro run, this rear mudguard does all it can to keep you clean on every ride. Dotted with 43 snap-off top holes to fit straight braces between the seat stays and an optimised indent which increases tyre clearance by 4mm, it is the ideal mudguard for a variety of wheels. Made from a durable polypropylene, it protects your rear suspension as well as the rest of your back end, making it a perfect choice for the daring downhill rider.Features:Material: Polypropylene with gloss finishProtection: Seal ShieldWheel Compatibility: 26", 27.5", 29"Tyre Compatibility: Up to 3"Length: 352mmWeight: 64gBuy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts ProGuard Standard Front MudguardReady for the rigours of modern mountain biking, the ProGuard from RapidRacerProducts protects you from spray, mud and anything else your tyres can flick up from the trails. Whether you’re taking on enduro or downhill race or just weekend trail rides, this strap-on front mudguard offers excellent protection.Features: Material: Special polypropylene mix Finish: Soft high gloss finish Length: 494mm Wheel Compatibility: 26", 27.5", 29"Tyre Compatibility: Up to 3" widthFork Compatibility: All forks including Boost (reverse arch forks not compatible) 6x Zip Ties included with each guard Indent at fork brace for additional clearance 24 crown holes for a massive range of mounting options Long front to cope with high-speed spray Can be used with any fork travel Snap-off hole covers reduce spray from travelling through unused holes Smaller turn down at front for better tyre clearance and to reduce blockages Rear flick offers even more protection when the wheel is turned Sticker recess offers greater protection for sticker adhesive Seal protection increased with RapidRacer acclaimed seal shield design Crash replacement discount scheme (register at rapidracerproducts.com) Weight: 119g (guard only)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Flexible and Durable Mudguard Made from polypropylene, the Proguard Standard Mudguard is excellent in cold weather and can withstand impact due to its innate flexibility and durability. Indent A mudguard tracking close to the tyre can offer great mud and spray protection but often at the cost of mud clogging and slowing the rider down, a mudguard that sits high off the tyre is conversely going to offer less protection so a compromise is needed. Long Front The front has been made longer to improve the protection of the face and eyes when riding at high speed. The turndown at the front deflects the spray downwards without clogging with mud which causes blockages. Snap-off Hole Covers Hole covers have been added to reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screwdriver to push the cover out leaving it clear for the zip tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including Boost forks (except reverse arch), this allows you to customise your fit. Rear Flick The rear flick was designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned. Seal Guard RapidRacerProducts' widely acclaimed Seal Guard has made it to the RapidRacerProducts Proguard Standard Mudguard as a means of offering greater protection for your seals from high-velocity mud and spray, the Seal Guard section also provides additional strength and rigidity to the rear reducing flex.
RapidRacerProducts ProGuard V2 Mini Front MudguardThe ProGuard V2 Mini Front Mudguard from RapidRacerProducts is a durable, stylish and low-profile front mudguard that's optimised for use with suspension forks. Plus, it's compatible with multiple wheel sizes with tyre sizes up to 3" tyres and feature integrated fork seal protectors. The ProGuard is an amazing new front mudguard from RapidRacerProducts that's designed for use with disc brake mountain bikes. Offering unmatched protection from mud and spray, it's perfect for Trail, Enduro or Downhill racers and essential for the weekend warrior looking for the very best protection. This guard is engineered specifically to increase tyre clearance, improve fit, and reduce mud clogging issues seen with this type of mudguard. Plus, this mini option offers a very compact design for all year-round protection and unmatched levels of protection for a guard of this size.The ProGuard range of mudguards have a soft high gloss finish which is a characteristic of the highly polished mould and the special polypropylene mix, this unique mix has been specifically blended for: Cold Weather Strength High Impacts High Flexibility High DurabilityAs a result of achieving the above properties it means that the surface layer is soft and will scratch easily, you must also be careful about putting any chemicals onto the surface as it may tarnish the finish. That said RapidRacerProducts have tested and can recommend the following chemicals to use: Silicone: Spray high quality silicone onto surface and very gently remove with a clean cloth to maintain a high gloss finish and to stop dirt and water from sticking. Bike Cleaner: Non caustic bike cleaners can be used on the ProGuard mudguard GT85/WD40/Solvents: Only rub these on the surface if you want to remove the gloss and display a matte finish to match your bike.Optimal Front Cover Protection The front has been made longer than some of the offerings out there as RapidRacerProducts see this is an area that can significantly improve the protection of the face and eyes when riding at high speed. The turn down at the front deflects the spray downwards without clogging with mud which causes blockages. Convenient and Durable Snap-Off Hole CoversRapidRacerProducts have added hole covers that reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screwdriver to push the cover out leaving it clear for the cable tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including boost forks (except reverse arch), this allows you to customise your fit.Rear Flick Mud and Spray ProtectionThe rear flick is designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned.Stylish and Easy to Use Sticker Recess The recess down the centre is a nice easy reference to apply coloured stickers to, but it has a more important job, this recess prevents the sticker having to sit proud on the surface of the guard making it vulnerable to durability and jet wash issues. The supertack glue used on the stickers is strong, although it's fair to say that no sticker is able to withstand a sustained attack from a powerful jet wash, although the recess does prevent a direct hit. Suspension Fork Seal Shield RapidRacerProduct's widely acclaimed seal shield has made it to the proguard as a means of offering greater protection for your seals from high velocity mud and spray, the seal shield section also provides additional strength and rigidity to the rear reducing flex. Zip Ties Included for Simple and Secure Mounting Six cable ties are provided with each mudguard, the holes on the side arms are mandatory requiring four leaving the other two for the fork brace (although more could be added if desired). Features: Dimensions: 386mm long Compatibility: Wheels: 26”, 27.5”, 29” Tyre Clearance: Up to a 3” Forks: All forks including Boost forks (except reverse arch) Fork Travel: Any travel Weight: 85g (without cable ties)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts RearGuard Clip-On Off-Road Mudguard The RearGuard Off-Road is a secure and easy to fit rear mudguard, designed to keep your rear and most of your back dry. Using a Velcro strap, the guard fits in around 20 seconds and stays put!The RearGuard is designed for use off road on either a mountain bike or CX bike, it's a fast fitting mudguard for those last minute decisions. It attaches underneath the saddle with 1 velcro strap and takes less than 20 seconds to fit. It will never come off during your ride and offers great protection for your REAR and back The 3 new creases add stability and strength and the additional length adds protection over rough terrain Features: Quick and easy to fit Offers protection from mud and spray Velcro fastener ensures a secure fit Weight: 41gNot recommended for use with dropper seat posts.Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts RearGuard Clip-On Road Mudguard The RearGuard ROAD is a secure and easy to fit rear mudguard, designed to keep your rear and most of your back dry. Using a Velcro strap, the guard fits in around 10 seconds and stays put!Features: Quick and easy to fit Offers protection from road spray Velcro fastener ensures a secure fitBuy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.