Mudhugger Shorty EVO Bolt-On Front MudguardThe Mudhugger Shorty EVO is a shorter variant of the Mudhugger EVO mudguard/fender that's compatible with modern mountain bike (MTB) suspension forks.The Mudhugger EVO is designed around the latest Fox 36 and 38's and Rockshox Zeb (not compatible with 38mm offset Zeb) to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for Zeb, see options) but still compatible with older (2017) onwards Fox forks 34 and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Also compatible with Ohlins RXF and Downhill (DH) forks (adapter bracket required, see options). Please Note: For all Downhill forks see the options for FOX and Ohlins DH version. Features: Length: 400mm total - Rear extension 265mm, front extension 105mm Weight: 105g, without fittings Bolts directly to the back of the fork brace. Default FOX kit supplied with rubber pads, bolts, washers and hex key to install to your Fox forks. For RockShox Zeb and Ohlins an Adapter Pack is required, sold separately Shorty version of the Long EVO More mud clearance No more crown fouling at full-compression Subtle kicker to keep length as short as possible without compromising spray protection 100% recycled PP Designed, made and packed in the UKBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Shorty EVO Ziptie Front Mudguard The Mudhugger Shorty EVO Ziptie is an easy to install mudguard/fender that's compatible with modern suspension forks. Ideal for downhill (DH), enduro and trail riding, this mudguard keeps trail spray and mud away from your face, so you can focus on the ride.The Shorty Mudhugger EVO Ziptie was designed with the help of DH World Cup and EWS racers. The Mudhugger Shorty EVO Ziptie is designed around the latest Fox 36 and 38's and RockShox Zeb to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost. For Manitou Mezza (and similar reverse fork arch forks) you will need to drill 4 small holes to align with the reverse fork brace. Features: Length: 400mm - Rear extension 265mm, front extension 105mm Weight: 100g, without fittings Supplied with 4 zipties to install on your forks More mud clearance No more crown fouling at full-compression Optimum length, not too short, no longer than needed Subtle kicker to keep length as short as possible without compromising spray protection Strong enough for DH racing at the highest level 100% recycled PP Designed, made and packed in the UKBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Medium Rear MudguardProtect yourself from mud and spray with this rear mudguard from Mudhugger. Designed for 29" and 27.5+ full-suspension bikes with seat stay angles above 27 degrees, this is a helpful option for protecting yourself from unwanted mud spray when tackling tough terrain. The Medium Rear Mudhugger is nearly identical to the Small Rear Fender, but 80mm longer. This longer version is ideal for most 27.5 full-suspension frames. And 29” hardtail bikes.If your bike has seat stay angles 28- 31 degrees then the Medium Rear Mudhugger is probably the best choice, this applies to the vast majority of bike designs. Think Cannondale, Whyte, Lapierre, Transition, Rose, Commencal, Calibre, Kona, GT, Canyon, Giant and Marin.The rear fender braces are designed to be custom cut around cable stops/guides and other unique seat stays/swingarm shapes and features. Some frames have asymmetrical stays, like found on EVIL bikes, and may not fit or will require extensive customization to fit.Kit includes fender, zip ties and protective/non-slip heli tape.Features:Ideal for most 29" and 27.5+ full-suspension bikes with seat stay angles above 27 degreesApprox. 640mm longApprox. 100mm wide at the widest partBraces are approx. 140mm longCompatible with Mudhugger's 100mm rear extenderBuy Mudhugger Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Large Rear MudguardAvoid unwanted mud and spray with this Large Rear Mudguard from Mudhugger. Designed for 29" and 27.5+ full-suspension bikes, this is the ideal essential when tackling off-road terrain. The rear fender braces are designed to be custom cut around cable stops/guides and other unique seat stays/swingarm shapes and features. Some frames have asymmetrical stays, like found on EVIL bikes, and may not fit or will require extensive customization to fit.Initially designed to overcome the problem of fitting mudguards to a bike with a dropper seat post the Rear Mudhugger works well on all bikes, providing they have disc brakes.However, attaching the Hugger to the seat stays also overcomes all of the problems normally associated with rear mudguards. They do not move out of line, get in the way getting on or off the bike, do not foul rear suspension travel, and are robust enough to take the rough and tumble of modern trail riding demands.For those of you into your Down Hill, enduro or endurance racing, being able to get out in all weather conditions, train hard and remain comfortable for much longer will undoubtedly pay dividends at the start of the race season.Features:Kit Includes: Fender, zip ties and protective/non-slip heli tape.Compatibility: Ideal for all 29" and 27.5+ full-suspension bikesDimensions: Approx. 760mm longDimensions: Approx. 105mm wide at the widest partDimensions: Braces are approx. 160mm longBuy Mudhugger Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger decals allow you to customize your ride and make it your own. Sold in packs of 5.
Are you ready? The worlds fastest mudguard is evolving…The New Mudhugger EVO, designed with the help of DH World Cup and EWS racers.We’ve had the benefit of designing the new Mudhugger EVO around the the latest FOX 36 and 38’s and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost.Please note: For fitting to RockShox Zeb or Ohlins forks the Mudhugger Adapter Kit (Product ID: 234767) is also required. More clearance,Stiffer,Optimum length, not too short, no longer than needed.,Subtle kicker to keep length as short as possible without compromising spray protection.,Strong enough for DH racing at the highest level.,100% recycled PP.,Made and designed in the UK..
Key Features:More clearance. ,Optimum length, not too short, no longer than needed. ,Subtle kicker to keep length as short as possible without compromising spray protection. ,Strong enough for DH racing at the highest level. ,100% recycled PP..
These hand guards are an excellent way of protecting yourself, especially if you ride where there are tight trees or loose branches sticking over the trail. The handguards are the brainchild of Arnaud Vincent who is a World Champion motorcycle racer and keen mountain biker. In 2014 he suffered a crash due to a tree branch hitting his brake lever which made him wonder why handguards have not been used on MTB’s like they are on motorbikes. Sam Hill has been using handguards at home and also at EWS races. These signature handguards have been designed with Sam Hill to form part of his signature range.
Compatible with boost and non-boost fork models and is also effective for use with forks up to 200mm travel, it features two different height mounting hole points on the side so you can be sure of the perfect fit. Also, for the greatest performance Nukeproof has optimised the design to have a nose at the front so it sits snug against your fork legs. Click here to view how to fit your Horizon Mudguard.
Nukeproof Horizon Front MudguardThe Nukeproof HZN mudguard is designed to be used on your forks to help prevent water, mud and grime from spraying on to your face. This mudguard is compatible with boost and non-boost models while also being ideal for use with forks up to 200mm travel. There are two different-height mounting hole points on the side of the guard, so you can tailor its fit on your bike. Plus, the front of the guard features a nose, which sits snug against your fork leg to ensure the most secure fit.Click here to view how to fit your Horizon Mudguard.Features: Prevents water, mud and grime spray Compatible with Boost and Non-boost forks Two mounting heights Includes 4x cable ties for installation Provides a secure fit for maximum protectionBuy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Giga Mountain Bike Mudguard KitThis Giga Carbon Mud Guard Kit is for use with the 2021-2022 Giga Carbon Frame.Features: 1x FB-GUO-131 - Mud Guard 3x FB-GAN-048 - Mud Guard BoltBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features: Extreme durable and lightweight design for maximum comfort and protection,3-Layer waterproof material,Cut to sit over knee and pads even when pedalling,Pre-bent ergonomic legs for comfort when riding,Elastic waist with double snaps for a precise fit,Water resistant pocket with zipper for secure closing,Waterproof taped seams.