Five Ten Women's Trailcross CLI Clip-In Cycle ShoesFor those of you who love to explore, both on your bike and on foot, the Five Ten Women's Trailcross CLI Clip-In Cycle Shoes are the perfect pick. A redesigned upper gives a sporty modern look while the impressive comfort and pedalling performance are carried over from previous iterations. Lightweight, breathable and yet made tough, the Women's Trailcross CLI Clip-In Cycle Shoes are made for the joys of off-road exploration. While the textile upper lets your skin breathe, the impact-resistant toe box and abrasion-resistant overlays provide reliable protection - ideal for when you're tackling rough routes both on and off the bike. A cushioned midsole adds comfort and flexibility for hiking and the Stealth® Marathon rubber tread provides tenacious grip levels when scrambling over rocks and roots. When you're on your bike, the sole design makes it easy to clip in and out of clipless pedals. No fuss, simply click, pedal and you'll be flying along the trail. But if you do find yourself clipped out over rough terrain, the grippy Stealth® Marathon rubber tread holds firm on the pedal body until you clip back in. Sustainable PerformanceThe Trailcross CLI also do their bit for the environment, reducing reliance on virgin plastics. They're made in part from recycled materials. In fact, 25% of the components used to make the uppers are made with a minimum of 50% recycled content. This reduces the environmental harm that comes with the production of new plastics. Cleat GuidanceThese shoes are compatible with MTB pedal systems, which use the 2-bolt cleat standard (SPD standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:Breathable constructionStealth® Phantom rubber outsoleLightweight EVA midsole for supportTough and reliable lace closure with hook-and-loop top strapTextile upper with abrasion-resistant overlays and reflective detailsImpact-resistant moulded toe boxUpper features at least 50% recycled contentWeight: 435g (size UK 8.5)2-bolt cleat compatible (cleats not supplied)Buy Five Ten Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Five Ten Women's Trailcross CLI Clip-In Cycle ShoesFor those of you who love to explore, both on your bike and on foot, the Five Ten Women's Trailcross CLI Clip-In Cycle Shoes are the perfect pick. A redesigned upper gives a sporty modern look while the impressive comfort and pedalling performance are carried over from previous iterations. Lightweight, breathable and yet made tough, the Women's Trailcross CLI Clip-In Cycle Shoes are made for the joys of off-road exploration. While the textile upper lets your skin breathe, the impact-resistant toe box and abrasion-resistant overlays provide reliable protection - ideal for when you're tackling rough routes both on and off the bike. A cushioned midsole adds comfort and flexibility for hiking and the Stealth® Marathon rubber tread provides tenacious grip levels when scrambling over rocks and roots. When you're on your bike, the sole design makes it easy to clip in and out of clipless pedals. No fuss, simply click, pedal and you'll be flying along the trail. But if you do find yourself clipped out over rough terrain, the grippy Stealth® Marathon rubber tread holds firm on the pedal body until you clip back in. Sustainable PerformanceThe Trailcross CLI also do their bit for the environment, reducing reliance on virgin plastics. They're made in part from recycled materials. In fact, 25% of the components used to make the uppers are made with a minimum of 50% recycled content. This reduces the environmental harm that comes with the production of new plastics. Cleat GuidanceThese shoes are compatible with MTB pedal systems, which use the 2-bolt cleat standard (SPD standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:Breathable constructionStealth® Phantom rubber outsoleLightweight EVA midsole for supportTough and reliable lace closure with hook-and-loop top strapTextile upper with abrasion-resistant overlays and reflective detailsImpact-resistant moulded toe boxUpper features at least 50% recycled contentWeight: 435g (size UK 8.5)2-bolt cleat compatible (cleats not supplied)Buy Five Ten Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Five Ten Women's Trailcross CLI Clip-In Cycle ShoesFor those of you who love to explore, both on your bike and on foot, the Five Ten Women's Trailcross CLI Clip-In Cycle Shoes are the perfect pick. A redesigned upper gives a sporty modern look while the impressive comfort and pedalling performance are carried over from previous iterations. Lightweight, breathable and yet made tough, the Women's Trailcross CLI Clip-In Cycle Shoes are made for the joys of off-road exploration. While the textile upper lets your skin breathe, the impact-resistant toe box and abrasion-resistant overlays provide reliable protection - ideal for when you're tackling rough routes both on and off the bike. A cushioned midsole adds comfort and flexibility for hiking and the Stealth® Marathon rubber tread provides tenacious grip levels when scrambling over rocks and roots. When you're on your bike, the sole design makes it easy to clip in and out of clipless pedals. No fuss, simply click, pedal and you'll be flying along the trail. But if you do find yourself clipped out over rough terrain, the grippy Stealth® Marathon rubber tread holds firm on the pedal body until you clip back in. Sustainable PerformanceThe Trailcross CLI also do their bit for the environment, reducing reliance on virgin plastics. They're made in part from recycled materials. In fact, 25% of the components used to make the uppers are made with a minimum of 50% recycled content. This reduces the environmental harm that comes with the production of new plastics. Cleat GuidanceThese shoes are compatible with MTB pedal systems, which use the 2-bolt cleat standard (SPD standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:Breathable constructionStealth® Phantom rubber outsoleLightweight EVA midsole for supportTough and reliable lace closure with hook-and-loop top strapTextile upper with abrasion-resistant overlays and reflective detailsImpact-resistant moulded toe boxUpper features at least 50% recycled contentWeight: 435g (size UK 8.5)2-bolt cleat compatible (cleats not supplied)Buy Five Ten Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Five Ten Women's Trailcross CLI Clip-In Cycle ShoesFor those of you who love to explore, both on your bike and on foot, the Five Ten Women's Trailcross CLI Clip-In Cycle Shoes are the perfect pick. A redesigned upper gives a sporty modern look while the impressive comfort and pedalling performance are carried over from previous iterations. Lightweight, breathable and yet made tough, the Women's Trailcross CLI Clip-In Cycle Shoes are made for the joys of off-road exploration. While the textile upper lets your skin breathe, the impact-resistant toe box and abrasion-resistant overlays provide reliable protection - ideal for when you're tackling rough routes both on and off the bike. A cushioned midsole adds comfort and flexibility for hiking and the Stealth® Marathon rubber tread provides tenacious grip levels when scrambling over rocks and roots. When you're on your bike, the sole design makes it easy to clip in and out of clipless pedals. No fuss, simply click, pedal and you'll be flying along the trail. But if you do find yourself clipped out over rough terrain, the grippy Stealth® Marathon rubber tread holds firm on the pedal body until you clip back in. Sustainable PerformanceThe Trailcross CLI also do their bit for the environment, reducing reliance on virgin plastics. They're made in part from recycled materials. In fact, 25% of the components used to make the uppers are made with a minimum of 50% recycled content. This reduces the environmental harm that comes with the production of new plastics. Cleat GuidanceThese shoes are compatible with MTB pedal systems, which use the 2-bolt cleat standard (SPD standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:Breathable constructionStealth® Phantom rubber outsoleLightweight EVA midsole for supportTough and reliable lace closure with hook-and-loop top strapTextile upper with abrasion-resistant overlays and reflective detailsImpact-resistant moulded toe boxUpper features at least 50% recycled contentWeight: 435g (size UK 8.5)2-bolt cleat compatible (cleats not supplied)Buy Five Ten Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight.We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length. The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride. The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight.We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length. The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride. The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight.We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length. The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride. The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight.We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length. The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride. The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.