The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight.We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length. The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride. The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight.We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length. The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride. The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
With the understated brow of the S2s and the iconic intake vents of the Speedcraft, the S3 Stone Sunglasses offer you both unique style and a high degree of performance. The S3 feature 100%'s shatter and impact-resistant Ultra-HD technology. This delivers impressive durability and protection for your eyes. The broad lens also offers wide peripheral vision and 100% UV protection. The hard-coated, scratch-resistant lens is also treated with hydrophobic and oleophobic coatings which repel water, oil, dirt, and more. Additional lens ventilation prevents fogging – keeping your vision clear in the most extreme conditions. Promoting all-day comfort, the S3 half-rim frame is formed from durable, flexible, and lightweight TR90. For added stabilisation, the nose and temple tips are formed from ultra-grip rubber ensuring a cushioned and secure fit, even when you're working up a sweat. HiPER® Crimson Mirror Lens Light Transmission: 14% The 100% HiPER® Crimson Mirror Lens optimises your vision with advanced high-definition technology. It ramps up the contrast, amps up colours and enhances details so you don't miss a thing. Filter Category 3 The optimised lens is great for bright lighting conditions with low light transmission.
The Speedcraft Sunglasses provide excellent protection with a high-impact resistant and lightweight polycarbonate lens. The lens optimises your vision with a 5-base cylindrical shield design that boosts peripheral vision and protection. Keeping your vision clear the sunglasses are designed with air scoops which increase ventilation – preventing the lens from fogging. Additionally, the lens comes with a scratch-resistant coating, plus an HYDROILO treatment which repels water, dirt and oil. The frame ensures long-lasting comfort with a durable, flexible, and lightweight TR90 construction. Stabilising the fit, the nose pads and tips are formed with ultra-grip rubber which secures the glasses' position against sweat and environmental mois HiPER® Crimson Mirror Lens Light Transmission: 14% The 100% HiPER® Crimson Mirror Lens optimises your vision with advanced high-definition technology. It ramps up the contrast, amps up colours and enhances details so you don't miss a thing. Filter Category 3 The optimised lens is great for bright lighting conditions with low light transmission.
Bridgedale's Boot Length Storm Sock uses three layers working to provide ultimate trail performance with primarily a merino wool knit providing anti-bacterial and moisture managing properties to keep your feet dry, warm and comfortable. An outer layer is produced with a tough nylon for abrasion resistance and with lycra throughout, you'll appreciate the performance fit, ensuring the sock remains firm and in place. Comfortably sitting above the ankle cuff of standard walking boots, the socks offer perfect protection and covering up the mid-calf, can easily be protected from water ingress.
Designed to withstand rigorous use in the outdoors, the Bridgedale StormSock Heavyweight Waterproof Boot Socks feature a resilient terry pad footbed, heel and ankle for optimum warmth and cushioning. Primarily knitted from Merino Wool, known for its anti-bacterial, anti-odour and moisture management properties, the sock will keep your feet warm, dry and comfortable. The outer layer sock, made from nylon, also protects the Hydrotech waterproof breathable membrane against abrasion from the boot. Plus, the flat toe seam and elastic arch support ensure the sock remains in place and doesn't cause any hotspots. To finish, you can rely on the stretch PU membrane and clever matrix lamination process that bonds the three layers of the StormSock together, offering premium stretch, wear after wear. The boot length also comfortably sits above the ankle cuff of standard walking boots. Covering the leg up to the mid-calf it can be easily protected from water ingress with waterproof trousers or gaiters.
Designed to withstand rigorous use in the outdoors, the Bridgedale StormSock Midweight Waterproof Boot Socks feature a resilient terry pad footbed, heel and ankle for optimum warmth and cushioning. Primarily knitted from Merino Wool, known for its anti-bacterial, anti-odour and moisture management properties, the sock will keep your feet warm, dry and comfortable. The outer layer sock, made from nylon, also protects the Hydrotech waterproof breathable membrane against abrasion from the boot. Plus, the flat toe seam and elastic arch support ensure the sock remains in place and doesn't cause any hotspots. To finish, you can rely on the stretch PU membrane and clever matrix lamination process that bonds the three layers of the StormSock together, offering premium stretch, wear after wear. The boot length also comfortably sits above the ankle cuff of standard walking boots. Covering the leg up to the mid-calf it can be easily protected from water ingress with waterproof trousers or gaiters.
With a 3 layer design, the Storm Sock Lightweight Ankle Sock is primarily knitted from Merino wool due to its ability to manage moisture, keeping you dry and fresh throughout activity. The outer layer is created with tough nylon to protect the Hydrotech membrane against abrasion in boots and a lycra knit provides Bridgedale's performance fit, ensuring the sock remains in place. Fitting a few centimeters above the ankle, the socks feel light and unrestrictive when trail running and speed hiking. Full waterproofing also prevents water ingress when heading out into the rain.
Orro Gold Shield JacketThe Orro Gold Shield Jacket is a remarkably versatile wind and water-resistant cycling jacket, designed to keep you comfortable across a wide range of weather conditions. The Gold Shield Jacket is a streamlined and protective jacket that excels across all the seasons. This is made possible via the use of a Storm Shield fabric called Misurina. This 4-way stretch fabric allows Orro to maintain a fitted, aerodynamic fit, just like a race jersey, ensuring no wasted energy when battling inclement conditions. When the weather turns wet, its 10,000mm water-resistance ensures you can ride far longer before you need to pull on a dedicated rain jacket - perfect for light rain and sudden showers. Orro have chosen to keep the jacket fleece free, apart from the cosy collar. This optimises breathability while allowing you to tailor the insulation to suit your own needs via your base layer choice. And come milder temperatures, the excellent breathability will prevent you from being drenched in sweat as you push hard on the pedals. Under the arms and down the sides of the jacket is a more flexible material for enhanced transpiration and a great fit.On those darker mornings and evenings of winter, reflective details will keep you more visible as you get your training done. Three rear pockets make space for all your cycling essentials and a waterproof centre pocket keeps a phone or other valuables safe and sound. Features:Materials: 100% Polyester 365 days a year - can be worn in winter or on cooler spring/autumn daysStorm Shield Fabric for excellent water resistanceAquazero water-repellent fabric under the arms for a great fit and breathabilityReflective stripes on the back3 Pockets, including waterproof pocket in the centreBuy Orro Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.