FR-2 Features: Fits older Sun Tour® two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in place FR-4 Features: Fits Atom®, Regina®, splined Zeus®, and some Schwinn®-approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Center bore for axle clearance is 10mm Always use a skewer or axle nut to hold tool firmly in place during removal FR-6 Features: Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always use a skewer or axle nut to hold tool firmly in place during removal
Removing the crown race is an essential step when changing forks and headsets. Without the proper equipment, removing a crown race from a fork steerer can be a difficult and even damaging process. The LifeLine crown race remover features four sharp blades to reach behind the crown race and provide evenly distributed clamping force when the jaws are tightened. On the reverse, there are four recesses to securely place a screwdriver for alternate striking, allowing you to work the crown race free in a gentle and precise manner, and leaving the crown race and steerer intact. Essential for workshops and home mechanics working on fork/headset upgrades and bike refurbishments.
This efficient and easy to use BBB cassette lockring tool always ensures accuracy and comfort as you're getting the job done. Please Note: This tool needs to be used along with a cassette chain whip or cassette gripping tool (sold separately).
This glue and sealant remover is equipped with a non-aggressive proprietary formula that helps remove rim tape glue, sealant or tubular glue residue from inside rims (and many other surfaces) prior to applying Muc-Off Tubeless Rim Tape (available separately). Muc-Off has made it easy to use thanks to its spray-on aerosol design that's safe to use on most metal, plastic and carbon fibre surfaces. Ideal for keeping in your home workshop for when it's time to carry out maintenance on your wheelset. Going Tubeless Muc-Off Glue & Sealant Remover is the perfect companion for preparing your rims for a tubeless setup. Removes Sealant Residue The non-aggressive formula is perfect for removing stubborn rim tape glue and sealant residue prior to applying Muc-Off Rim Tape. Removes Sticker Adhesive It’s also perfect for removing sticker adhesive from your bike – whether you’re building your bike straight out of the box or just switching up your decals! Easy to Use The Glue & Sealant Remover comes in a handy spray aerosol which makes it super easy to dispense directly onto your rims whilst you work. Manufacturer's Part Number: 20130 200ml
Stans No Tubes Valve Core RemoverEasily remove Presta and Schrader valve cores with this Valve Core Remover from Stans No Tubes. Made from CNC 6061 aluminium and featuring an anodized finish, it slots in between spokes for seamless core removal without the hassle. Features:Use: Commuter, Touring, Cyclocross, Road, Mountain BikeUse in conjunction with their Sealant Injector or 2-ounce refill bottleHigh-quality tool is fully CNC 6061 aluminium, red anodised, and features a laser etchedKnurled end for a non-slip gripAnodized finishLaser-etched logoWeight: 10.5gBuy Stan's No Tubes Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Presta-Schrader Valve Core Remover ToolThe LifeLine Valve Core Remover Tool is perfect for removing and replacing Presta valve cores. It helps to prevent you over-tightening and splitting the valve stem and is an essential tool for use to fit a valve extender when running deep profile rims. It is also very useful for removing the valve core when in the process of setting up a tubeless wheel/tyre system.Features:Material: CNC AlloyValve Type: PrestaHelps prevent over-tightening and splitting of valve stemFits valve extensions (cut-out)Fits valve cores (opening)Buy LifeLine Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Effetto Mariposa Carogna Tubular Tape Remover (150ml) Making the removal of tub tape or glue less bothersome the Carogna Tubular Tape Remover uses a new breed of chemical that is neither smelly or dangerous. Easily spread with a brush it effectively dissolves mastic for easy removal using just a cloth. Features:Remover will dissolve the mastic, making it easy to remove with a clothCarogna Remover, thanks to its high viscosity, can be spread on the rim gluing surface with a brushNot smelly nor dangerous, the remover uses a new breed of chemicalsBuy Effetto Products from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Headset Cup Remover An ingenious solution for the removal of headset cups without the need for expensive headset presses. Secure your frame in a bike stand and place the open end inside the head tube and hammer the cups out. A simple yet highly effective method that will save you both time and money. Features: Fits 1.1/8" Only Buy LifeLineProducts from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Headcup Remover (RT-1)Offering you an efficient and easy way to remove your bike’s pressed in headset cups, the RT-1 just needs a firm impact with your mallet or hammer on its head and the flared ends will accurately extract the cup from the frame. Park Tool has also made this versatile tool compatible with Pressfit 30 (PF30) and SRAM DUB press-fit bottom bracket cups, making it the ideal addition to any professional or home mechanics range of tools.Features:Material: Strong, heat-treated alloy steel with nickel finishCompatibility: Fits 1", 1.1/8" and 1.1/4" headsetsNominal outer diameter of shaft is 1" (25.4mm)For use on 27-38mm (1" to 1.1/2") bearing racesAlso removes PressFit 30 (PF30) bottom bracket units (PressFit 30 inside diameter is the same as headset cups, and are pressed in the same manner)Also easily removes cups on one-piece cranksAlso removes SRAM DUB non-threaded pressed in bottom brackets as well as other PressFit 30 (PF30) systemsFor the 1.1/4 inch and 1.1/2 inch headset standards see the RT-2 model (sold separately)Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Headcup Remover (RT-1)Offering you an efficient and easy way to remove your bike’s pressed in headset cups, the RT-1 just needs a firm impact with your mallet or hammer on its head and the flared ends will accurately extract the cup from the frame. Park Tool has also made this versatile tool compatible with Pressfit 30 (PF30) and SRAM DUB press-fit bottom bracket cups, making it the ideal addition to any professional or home mechanics range of tools.Features:Material: Strong, heat-treated alloy steel with nickel finishCompatibility: Fits 1", 1.1/8" and 1.1/4" headsetsNominal outer diameter of shaft is 1" (25.4mm)For use on 27-38mm (1" to 1.1/2") bearing racesAlso removes PressFit 30 (PF30) bottom bracket units (PressFit 30 inside diameter is the same as headset cups, and are pressed in the same manner)Also easily removes cups on one-piece cranksAlso removes SRAM DUB non-threaded pressed in bottom brackets as well as other PressFit 30 (PF30) systemsFor the 1.1/4 inch and 1.1/2 inch headset standards see the RT-2 model (sold separately)Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Freewheel Remover Tool - FRHeat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.Fits Suntour 2 Pin (FR-2): Fits older Sun Tour two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in placeFits Atom - Regina -Zeus (FR-4): Fits Atom, Regina, splined Zeus, and some Schwinn Approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Always use a skewer or axle nut to hold remover firmly in placeFits BMX 4-Pin (FR-6): Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always hold the remover secure to the hub using axle nut or quick release skewer.NOTE: The Sun Tour four notch freewheels do not accept the FR-2 remover. Buy Park Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Sprocket Remover / Chain Whip (SR-18.2)If you regularly work on single speed bikes, the SR-18.2 Sprocket Remover and Chain Whip is the ideal tool for making your rear wheel repair jobs easier. Professional bike tool experts Park Tool have made the handle from heat-treated material and added a moulded handle for extra hand comfort.Durable Chain WhipHeat treated to make sure the tool won't bend or flex, this tough bike tool has a moulded handle for optimum comfort when loosening and tightening. The chain part of the tool features hardened pins to keep it firmly in place when latched to the sprocket, while the 1" box-end wrench will fit Park Tool freewheel and cassette Lockring Tools to make removal that bit easier. This is a hard-wearing maintenance must-have for any workshop or toolkit.Features: Material: Heat Treated Metal, moulded Plastic handle Compatibility: 1/8" fixed gear sprockets and single speed cassettesWorks on 1/8" fixed gear sprockets and single speed cassettes1" (25.4mm) box-end wrench fits Park Tool freewheel/cassette lockring toolsFeatures hardened pins to keep the chain in place Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.