The all-new Levo delivers the unbelievable power to ride more trails through an unequaled combination of ride quality, usable power, and ride anywhere range. It’s the distillation, application, and amplification of a 40-year obsession with creating the world’s best riding mountain bikes. Since its introduction, Levo has set the bar every other e-MTB aims for, and the new Levo raises that bar again.It starts with our Turbo Full Power 2.2 motor and Turbo Connect Unit (TCU), which provide Levo with a smooth and seamless amplification of your efforts—4x you power that lets you choose where to ride, and when you want to do it. Levo also shatters limitations when it comes to range, amplifying your effort for up to five hours of trail time. Now you can ride farther, and explore more, than ever before. And the optimized chassis boasts 150mm of custom-tuned rear suspension and adjustable geometry that delivers a stable and natural ride like no other. Because at the end of the day, it’s the ride that matters. Believe it.More climbing, more descending, more miles, more fun. Spec’d with a no-fuss SRAM SX/NX drivetrain, trail-taming RockShox suspension, and a lightweight, durable alloy wheelset, the all-new Turbo Levo delivers more of everything that you love about trail riding.Levo’s fully integrated Turbo Full Power 2.2 motor, 700Wh battery, and Turbo Connect Unit deliver category-leading 90 Nm of torque and 565 watts of power for up to five hours of ride time, empowering you to ride farther and faster than ever before.,The Levo’s Turbo Connect Unit (or “TCU”) is more than an “On-Off” button—it’s the brains of the bike. The TCU shows your battery level and power-assist mode. It also communicates, via ANT+/Bluetooth®, with our optional handlebar display to display even more information about your day’s ride.,A dedicated mixed-wheel size design with a 27.5” wheel in the back and 29” up front delivers a nimble ride that carves circles around other full-power e-MTBs. A generous cockpit centers you on the bike, optimizing traction and corner control. The low bottom bracket, slack headtube angle and reduced fork offset keep things stable in the rough.,Levo offers two distinct geometry settings, allowing you to easily dial-in its performance for any riding style and any terrain. Bottom bracket height can be fine-tuned up or down by 7mm.,Levo’s 150mm of rear travel is supple on small bumps, devours square-edged hits without a twitch, eats massive G-outs for breakfast, yet still offers amazing pedal response and delivers your power to the ground with total efficiency.,The Levo’s S-Sizing is based on what matters—rider size and style, not inseam. Six sizes, all with similar headtube lengths and standover, allow you to choose the size that best suits your individual style. Smaller S-Size numbers are going to be nimble and more flickable, while bigger S-Sizes deliver more stability and a roomier ride..
The Switch 7 – the Need for Speed Enter the Orange Switch 7, taking its name from our fun, popular MX wheeled Switch 6 but going bigger, faster, and harder, this bike is taking things a little more seriously.The aim with the Switch 7 was to produce a race bike, to take everything we already knew with the addition of feedback from supported EWS racers and the newly established factory racing program and combine that to make a bike that's even more capable of competing at the sharp end of races on the toughest tracks in the world.The Switch 7 is a true representation of Orange Bikes’ capabilities in frame development and production. The frame and each individual component have seen extensive FEA analysis and 3D modelling to identify any potential issues and to optimise each structure to perform at its best.Of course, we back all of this up with real-world prototype testing and have clocked up the miles amongst the test team, Factory Racing team and a few riders who are known for being hard on bikes, validating the computer analysis and giving us the confidence in the design.FEA has been used for for both deflection and fatigue to fine tune the frame's elements for strength and optimal compliance.Although the frame silhouette is still very intentionally that of an Orange, a great deal has changed, but also much remains the same. This is a completely UK made frame, manufactured by the hands of craftsmen with decades of experience, from flat sheets of aerospace grade aluminium to individually custom-fabricated tubes, seam-welded for each specific purpose, working in harmony with CNCed components from aluminium billet meticulously modelled and analysed.This all produces an aluminium frame with a weight less than that of many ‘carbon’ frames in its category. It also means we have a product that's strong, durable and fully recyclable at the end-of-life cycle.WHY THE SWITCH 7 NOW?Orange's image in the media has always been “Those British guys who make the simple single-pivot bikes in the grim north…”Well, first up, it’s not grim up North, it’s pretty damn spectacular and we are blessed with some of the finest trails in the country on which to hone and test our bikes.Secondly, performance single-pivot is and always will be the core of the Orange Bikes philosophy; that will never change. We believe in the benefits of a single-pivot system, its performance and its unique ride feel that make an Orange Bike iconic; and that is not as simple as you think. Racing has been a part of our culture since Orange’s inception, the hunger to compete and challenge ourselves has always been part of the company’s ethos from day one. The new Switch 7 was born out of a need simply to go faster on the race track!So why now? That’s not to say that we haven’t done a linkage bike before!Over the years there have been many examples of Orange bikes using a linkage, some that we have put into production and many more which we have prototyped. At the right point in time when we find a valid reason to proceed with a linkage bike, we have done, and these bikes have been used on the UCI World Cup downhill circuit, with privateer racers as well as on your local trails for years.When we conceived the idea of a new Orange Factory Racing team to compete in the EWS the seeds of a new enduro race bike were already germinating.At Orange we are passionate about all things two-wheeled. The mix of decades of development with our unique frame construction methods, along with a race team with plenty of years under their belt, meant we had the ideal melting pot to create our greatest race platform yet.SWEATING THE DETAILS The Switch 7 is an MX wheeled enduro bike 170mm travel front and rear. It uses a link-driven 205x65 trunnion shock, mounted low in the frame helping to lower the bike's centre of gravity and allow for a more neutral weight distribution whilst riding. A trunnion mounted shock in our factory spec runs on a full complement of bearings instead of bushings, both the trunnion mount and lower eyelet, along with all the frame pivots run on cartridge bearings allowing us to achieve as low as possible break away force, providing incredible sensitivity to the initial part of the shock's stroke.The lynchpin of this dynamic bike is our STRANGE power link. STRANGE (Special Technology RANGE) has been responsible for numerous projects, from prototype frames to general components like grips, for a large proportion of Orange’s existence. It forms a huge part of our development process and has seen some pretty incredible products over the years. Some of which never saw it past the testing phases.The STRANGE power link allows us to have a considerably more progressive shock curve than we have used previously. It’s this shock curve which adds to the truly bottomless feeling that the Switch 7 delivers, but also allows the use of both high-volume air cans or coil shocks. Through the rear shock’s travel, the leverage ratio falls from 2.85 to 2.10. Looking at shock force, this means the real working progression is 36%. The curve was developed so it maintains the fun direct feel that Orange bikes have become famous for while adding the big travel requirements of a very progressive platform.With the bike’s kinematics sorted, this race machine also benefits from our lowest pivot position to minimise pedal kickback, and drivetrain induced interference, leaving the rider to do the job at hand. Anti-squat numbers for the Switch 7 in the 32/52t gearing start at 130% falling to 105% at full travel. Around dynamic sag the anti-squat is at 120%, this means that the bike will be efficient on the pedals when pushing hard in or out of the saddle.An additional request from the Orange Factory Racing team was to have an option to increase the bike's bottom bracket height, we’ve done this using an additional pair of “dog bone links” which are available separately and increase the bikes BB height by 5mm with only a half-degree steepening of the head angle, giving the rider the choice when the terrain demands it without adversely affecting the steering geometry.The frame is covered in features not previously seen on our bikes and are the result of meticulous analysis and testing. The Switch 7 sports a 49/56 ZS headtube, this has helped improve both strength and stiffness at the front end of the bike, increase the surface area for welding between head tube, down tube and top tube as well giving us enough room to drop the downtube slightly to allow for a water bottle in the front triangle. To make access even easier new tooling was produced to create a recess on the top side of the down tube. The bike also uses a UDH gear hanger incorporating SRAM’s new industry standard and allowing a spare to be bought at nearly every bike shop on the planet.Technology developed on other models also plays it part, the Switch 7 has an asymmetrical swingarm design similar to the recently released Stage 6 Evo, this swingarm allowed us to increase the bike's vertical stiffness whilst tuning its lateral compliance, producing a bike with a direct feel but with buckets of grip.Focussing on chassis dynamics has been important throughout the Switch 7’s testing program. It’s easy to make a bike too stiff and effectively end up with reduced traction and a “dead” or “wooden” feel to the bike’s ride. A large part of the additional grip being produced by this bike is down to a design that isolates the shock from the lateral forces coming through the frame particularly during hard cornering and large compressions, so the shock is only loaded in a linear manner. There were a few reasons for doing this; first to ensure the best possible life of the shock and bearings, second to minimise any external input that could increase friction and hamper the shock’s performance, and third this linkage design allowed us to control the swingarm’s lateral compliance using custom designed and manufactured tubes specific for the job.Throughout the design process we were conscious of our reputation for low maintenance bikes. We made every effort to conceal the majority of our bearings within the front of the swingarm, out of harm's way and safe from jet-washers.Bikes will come with a 5 year bearing warranty for the original owner and any original owners outside of that period will receive heavily subsidised pricing.The icing on the cake is our new chainstay and downtube protectors. These keep your pride and joy looking sharper for longer, help dampen chain slap, impact from stones and are the final details on a bike that has seen an incredible amount of development.The FactsWHY THE SWITCH 7F: 170MM | R: 170MM | W: 29/27.5,Brand New Lightweight Frame machined & Handbuilt in Britain,5 year frame warranty with Limited Lifetime Crash Replacement,New Aggressive Enduro Race geometry optimised for 170mm front & rear travel,New Linkage Driven Progressive (LDP?) suspension kinematics.,More neutral pivot location allowing less drivetrain/suspension interaction,Low position Asymmetric pivot – neutral suspension feel & increased chainring clearance,Asymmetrical swingarm with increased longitudinal stiffness,New top tube accessory/Bottle cage mounts and bottle dimple in frame ,New stiffer lower profile 56mm zerostack Head tube,Geometry for reduced offset fork,New Improved dropout with UDH gear hanger,Boost 148 rear hub spacing,New Top tube accessory/Bottle cage mounts and bottle dimple in frame,Internal cable/hose routing,30 x 8 bearing mount compatible shock,205 x 65 trunnion shock for reduced friction,Adjustable BB height.
The new 2021 Haibike AllMtn 7, made of robust and light full carbon, offers you uncompromising ePerformance on the trail: thanks to the completely revised modern geometry and kinematics, this full suspension convinces with its easy handling. The new Yamaha PW-X2 motor offers significantly improved support at higher cadences and the larger 720Wh battery provides even more range for long rides. The wheel size mix ensures optimum traction uphill and good rollover behaviour downhill. With the 160mm FOX Kashima chassis and Shimano Deore XT shifting and braking components, you are perfectly equipped for every trail and can master jumps or new lines safely and confidently.Key Features:FRAME MATERIAL - Full Carbon,DRIVE UNIT - Yamaha PW-X2, 80Nm, 25km/h,BATTERY - Yamaha InTube 720Wh,FORK - FOX 38 Factory Kashima, Travel: 160mm.
The all-new Levo delivers the unbelievable power to ride more trails through an unequaled combination of ride quality, usable power, and ride anywhere range. It’s the distillation, application, and amplification of a 40-year obsession with creating the world’s best riding mountain bikes. Since its introduction, Levo has set the bar every other e-MTB aims for, and the new Levo raises that bar again.• Levo’s fully integrated Turbo Full Power 2.2 motor, 700Wh battery, and advanced MasterMind Turbo Control Unit deliver category-leading 90 Nm of torque and 565 watts of power for up to five hours of ride time, empowering you to ride farther and faster than ever before.• The Specialized TCU offers robust design and clever integration to ensure that full control is at your fingertips. Connect to Mission Control to ensure you get the most out of your Turbo Levo, customise your ride modes and use smart control to get the most out of your battery.• A dedicated mixed-wheel size design with a 27.5” wheel in the back and 29” up front delivers a nimble ride that carves circles around other full-power e-MTBs. A generous cockpit centers you on the bike, optimizing traction and corner control. The low bottom bracket, slack headtube angle and reduced fork offset keep things stable in the rough.• Levo offers six distinct geometry settings, allowing you to easily dial-in its performance for any riding style and any terrain. Head tube angle can be adjusted between 63- and 65.5-degrees. Bottom bracket height can be fine-tuned up or down by 7mm.• Levo’s 150mm of rear travel is supple on small bumps, devours square-edged hits without a twitch, eats massive G-outs for breakfast, yet still offers amazing pedal response and delivers your power to the ground with total efficiency.• The Levo’s S-Sizing is based on what matters—rider size and style, not inseam. Six sizes, all with similar headtube lengths and standover, allow you to choose the size that best suits your individual style. Smaller S-Size numbers are going to be nimble and more flickable, while bigger S-Sizes deliver more stability and a roomier ride.
The all-new Levo delivers the unbelievable power to ride more trails through an unequaled combination of ride quality usable power and ride anywhere range. It’s the distillation application and amplification of a 40-year obsession with creating the world’s best riding mountain bikes. Since its introduction Levo has set the bar every other e-MTB aims for and the new Levo raises that bar again. It starts with our Turbo Full Power 2.2 motor and Turbo Connect Unit (TCU) which provide Levo with a smooth and seamless amplification of your efforts—4x you power that lets you choose where to ride and when you want to do it. Levo also shatters limitations when it comes to range amplifying your effort for up to five hours of trail time. Now you can ride farther and explore more than ever before. And the optimized chassis boasts 150mm of custom-tuned rear suspension and adjustable geometry that delivers a stable and natural ride like no other. Because at the end of the day it’s the ride that matters. Believe it. Take your trail riding to a whole new level with the Turbo Levo Comp. Featuring our all-new M5 alloy chassis SRAM’s expansive GX Eagle 12-speed drivetrain and buttery FOX Performance suspension it’ll have you riding circles around everyone else. Levo’s fully integrated Turbo Full Power 2.2 motor 700Wh battery and Turbo Connect Unit deliver category-leading 90 Nm of torque and 565 watts of power for up to five hours of ride time empowering you to ride farther and faster than ever before. The Levo’s Turbo Connect Unit (or “TCU”) is more than an “On-Off” button—it’s the brains of the bike. The TCU shows your battery level and power-assist mode. It also communicates via ANT+/Bluetooth® with our optional handlebar display to display even more information about your day’s ride. A dedicated mixed-wheel size design with a 27.5” wheel in the back and 29” up front delivers a nimble ride that carves circles around other full-power e-MTBs. A generous cockpit centers you on the bike optimizing traction and corner control. The low bottom bracket slack headtube angle and reduced fork offset keep things stable in the rough. Levo offers six distinct geometry settings allowing you to easily dial-in its performance for any riding style and any terrain. Head tube angle can be adjusted between 63- and 65.5-degrees. Bottom bracket height can be fine-tuned up or down by 7mm. Levo’s 150mm of rear travel is supple on small bumps devours square-edged hits without a twitch eats massive G-outs for breakfast yet still offers amazing pedal response and delivers your power to the ground with total efficiency. The Levo’s S-Sizing is based on what matters—rider size and style not inseam. Six sizes all with similar headtube lengths and standover allow you to choose the size that best suits your individual style. Smaller S-Size numbers are going to be nimble and more flickable while bigger S-Sizes deliver more stability and a roomier ride. Frame Specialized M5 premium alloy headset adjust BB height adjust S-Sizing internal cable routing 150mm travel 148mm spacing Rear Shock S1: FOX DPS Performance Series 3-position lever rebound adjust 52.5x210mm S2-S6: FOX FLOAT X Performance LSR 2-position lever 55x210mm Fork Fox Rhythm 36 S1: 150mm travel S2-S6: 160mm travel Stem Alloy Trail Stem 35mm bar bore Tape Specialized Trail Grips Handlebars Alloy 35mm diameter 780mm width 8-degree backsweep 6-degree upsweep Saddle Bridge Comp Hollow Cr-mo rails 155/143mm Front Brake SRAM Code R 4-piston caliper hydraulic disc S1-S3: 200mm S4-S6: 220mm Rear Brake SRAM Code R 4-piston caliper hydraulic disc 200mm Rear Derailleur SRAM GX Eagle 12-speed Shift Levers SRAM GX Eagle 12-speed Cassette SRAM XG-1275 12-speed 10-52t Crankset Praxis forged M30 custom offset 160mm Chain SRAM NX Eagle 12-speed Chainrings SRAM X-Sync Eagle 104 BCD 32T steel Front Hub Alloy sealed cartridge bearings 15x110mm thru-axle 28h Rims Specialized 29 hookless alloy 30mm inner width tubeless ready Rear Hub Alloy sealed cartridge bearings 148mmx12mm thru-axle 28h Spokes DT Swiss Industry Front Tire Butcher GRID TRAIL casing GRIPTON® T9 compound 2Bliss Ready 29x2.6' Inner Tubes Standard Presta Valve Rear Tire Eliminator GRID TRAIL casing GRIPTON® T7 compound 2Bliss Ready 27.5x2.6' SeatPost X-Fusion Manic infinite adjustable two-bolt head bottom mount cable routing remote SLR LE lever 34.9 S1: 100mm S2: 125mm S3: 150mm S4/S5: 175mm S6: 190mm Seat Binder Alloy 38.6mm Motor Specialized Turbo Full Power System 2.2 Motor UI/Remote Specialized TCU 10-LED State of charge 3-LED Ride Mode display ANT+/Bluetooth® w/Handlebar remote Battery Specialized M3-700 Integrated battery 700Wh Charger Custom charger 42V4A w/ Rosenberger plug Wiring Harness Custom Specialized wiring harness As with any product specification is subject to change without prior notification. You are advised to confirm current specification before buying. Please note that this bike does not come with pedals.
The Giga 297 Factory XT features a full carbon frameset with Nukeproof's reactive and adjustable suspension platform and it is equipped with exceptional components to match. It is also engineered with a mixed wheel platform, with a 29" wheel up front and a 27.5" on the rear, giving a sublime balance of speed and stability that enhances your pace, confidence and control. Fox Factory Kashima Suspension and Shimano XT 12-Speed Groupset This Giga Factory edition is armed with Fox 38 Float Factory Kashima coated forks, a Float X2 Factory Kashima rear shock and a Shimano XT M8100 12-Speed groupset. This groupset includes a wide-ranging 10-51T cassette, XT M8120 4-Pot hydraulic disc brakes and a Shimano XT Hollowtech II chainset. Plus, this full-suspension bike rolls fast and stable upon DT Swiss EX1700 Spline 30 wheels wrapped in Maxxis Assegai and Minion DHR Tubeless Ready tyres, giving you more pace and grip than you thought possible. Gluttony – Habitual Greed or Excess It’s a motto that athletes like Sam Hill live by. The new Nukeproof Giga is the embodiment of this idea; Designed to be the ultimate hard-hitting Super-Enduro weapon for when you just need more. As riders, we are all guilty of the gluttonous sin; we never stop striving, never stop pushing, enough is never enough in the hunt for the ultimate. It’s a constant push for bigger, longer, rougher and faster with ever-increasing demands on the performance and capabilities of our bike. The pursuit is endless. In its first year, the Giga frames have racked up numerous test wins and media awards, plus a whole heap of silverware at the races. Whatever the wheel size; the Giga is a seriously capable machine, with 180mm (27.5” or 29”/27.5”) or 170mm (29”) rear travel; the Giga is a monster truck of a bike that has travel in reserve for when you need it. But to pigeon-hole it as a point-and-shoot machine would be a disservice as it is so much more capable than this might suggest. Due to the way that it uses its travel; the Giga gives you the feel of a big bike, yet the versatility of a modern super-enduro bike. The Giga has a dynamic and confidence-inspiring ride to help you push your limits in all kinds of terrain. It’s equally at home at big mountain technical enduro stages of venues like La Thuile, as it is lapping the biggest lines in the Whistler bike park. Supportive, Controlled and Progressive Suspension Performance The suspension is designed to be super supple off the top, whilst being supportive in the mid-stroke and progressive throughout the rest of the travel. The anti-squat is optimised to ensure the Giga descends like a hooligan yet behaves itself on the climb back to the top for the next run. The suspension platform is based on the same horseshoe driven linkage as Nukeproof’s award-winning Dissent downhill frame, albeit now with a 2-stage main pivot flip-chip. Using an eccentric axle system, riders can alter the Kinematic progressivity, so the bike can be tailored to suit the conditions on the trail with only an 8mm Allen key. Setting 1 = 25.5% progression Setting 2 = 29% progression Both settings have a super supple beginning for small bump compliance. They also both have good mid-stroke support for better cornering and pumping. Like the Dissent, the progression drops off in the end stroke to prevent mid-stroke harshness or spiking and allows more tuning options with volume spacers. The + Progressive setting can be used to add shock progression on a coil set up just like adding a volume spacer to an air shock. The added suppleness is also good in wet and slippery conditions. Robust and Lightweight Carbon Fibre Frameset The Giga Frame is constructed completely from UD 700/800 Carbon fibre. This allowed Nukeproof to optimise the stiffness and compliance of the frame parts individually. The front triangle has been tailored for stability and precision, whilst the rear triangle was designed for compliance to help tracking and provide grip. Another bonus of the carbon rear triangle is that it has a lower un-sprung mass for ultimate suspension performance. To ensure a perfectly dialled fit Nukeproof now offer the 297 bikes in S, M, or L sizes and the 290 bikes in M, L, XL or XXL. The frame geometry is Long, Low, Slack and Steep as it is based around their saddle offset principle, which ensures the seated riding position is tailored across all sizes, with steeper seat angles on bigger frames. The Seat tube is also designed for maximum seat post insertion to allow maximum drop. Fox Suspension and Wide-Ranging Shimano XT Groupset This Factory specification is designed as the perfect privateer's race bike. Spec'd with custom-tuned Fox Factory 38 and X2 suspension. The drivetrain is from Shimano’s bulletproof performance 10-51 range XT groupset. The braking performance is from Shimano’s ultra-powerful XT 4 pot brakes. The all-carbon frame rolls on DT Swiss EX1700 wrapped in Maxxis Tubeless Ready tyres. Water Bottle and Accessory Mounts and Integrated Rear Mudguard The Giga is also sculptured to fit a 750ml water bottle (carbon bottle cage included) as well as an accessory mount under the top tube for emergency trail tools. All models also feature an integrated rear mudguard and plenty of clearance for up to 2.5” tyres. The frames feature a clear paint protection kit as standard with 3D contoured rubber downtube, seat and chainstay protection. The Nukeproof GIGA: Gluttony is not a sin. Please Note: Due to severe delays in the bicycle supply chain, we have been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table for accurate information. Features: Frame: Nukeproof Giga 297 Carbon, 180mm Travel, ultra-strong monocoque UD Carbon Fibre frame, adjustable main pivot, internally piped cable routing, ISCG 05 mounts, Enduro Bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection and Factory fitted clear paint protection kit covering TT/DT/CS/SS Fork: Fox 38 Float, Factory Series, Kashima, Grip 2 Damper, 180mm, 44mm Offset, BOOST, Orange Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom CM, RM, Rezi CM tune, 205x65mm, Trunnion with Bearing End, 1x 0.3 spacer fitted Front Wheel: DT Swiss EX1700 SPLINE 30, 29"", 6 Bolt, 110x15mm Rear Wheel: DT Swiss EX1700 SPLINE 30, 27.5"", 6 Bolt, Shimano Microspline Driver, 148x12mm Tyres: Front: Maxxis Assegai 29"" x 2.5 WT, 3C Maxx Grip DD TR, Rear: Maxxis Minion DHR II 27.5” x 2.4 WT, 3C MaxxTerra DD TR Crankset: Shimano XT M8100 12-Speed, Hollowtech 2, 170mm, 32T, 52mm Chainline Shifter: Shimano XT M8100-R, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano XT M8100, SGS 12-Speed, Shadow Plus Chain: Shimano XT M8100 HG 12-speed Inc Quicklink Cassette: Shimano XT M8100-12, 12-Speed (HYPERGLIDE+), 10-51T Chain Guide: Nukeproof guide with Bash, 28-36T, ISCG-05, Black Brakes: Shimano XT M8120, 4 Pot Brake, Metallic Pads Front Rotor: Brakco, 203mm Rear Rotor: Brakco, 203mm Handlebars: Nukeproof Horizon V2 25mm Rise, Width - S780mm, M780mm, L800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Bikeyoke Divine Stealth with Brand-X Remote lever, S:125mm drop; M:160mm drop; L:185mm drop Headset: Nukeproof, 44-56 IITS Grips: Nukeproof Sam Hill Signature Accessories: Nukeproof Carbon Water Bottle Cage Weight: 15.43kg Medium Tubeless Key Information: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 180mm Axle to Crown: 594mm Fork Offset: 44mm Rear Travel: 180mm Wheels Size: Front 29" / Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 28% Shock Size: 205x65mm Shock Hardware F: TRUNNION Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x 6901-2RS MAX, 4x 6902-2RS MAX, 2x6804-2RS MAX, 2x 6900-2RS MAX Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Giga 290 Factory edition is armed with Fox 38 Float Factory Kashima coated forks, a Float X2 Factory Kashima rear shock and a Shimano XT M8100 12-Speed groupset. This groupset includes a wide-ranging 10-51T cassette, XT M8120 4-Pot hydraulic disc brakes and a Shimano XT Hollowtech II chainset. Plus, this full-suspension bike rolls fast and stable upon DT Swiss EX1700 Spline 30 wheels wrapped in Maxxis Assegai and Minion DHR Tubeless Ready tyres, giving you more pace and grip than you thought possible. Gluttony – Habitual Greed or Excess It’s a motto that athletes like Sam Hill live by. The new Nukeproof Giga is the embodiment of this idea; Designed to be the ultimate hard-hitting Super-Enduro weapon for when you just need more. As riders, we are all guilty of the gluttonous sin; we never stop striving, never stop pushing, enough is never enough in the hunt for the ultimate. It’s a constant push for bigger, longer, rougher and faster with ever-increasing demands on the performance and capabilities of our bike. The pursuit is endless. In its first year, the Giga frames have racked up numerous test wins and media awards, plus a whole heap of silverware at the races. Whatever the wheel size; the Giga is a seriously capable machine, with 180mm (27.5” or 29”/27.5”) or 170mm (29”) rear travel; the Giga is a monster truck of a bike that has travel in reserve for when you need it. But to pigeon-hole it as a point-and-shoot machine would be a disservice as it is so much more capable than this might suggest. Due to the way that it uses its travel; the Giga gives you the feel of a big bike, yet the versatility of a modern super-enduro bike. The Giga has a dynamic and confidence-inspiring ride to help you push your limits in all kinds of terrain. It’s equally at home at big mountain technical enduro stages of venues like La Thuile, as it is lapping the biggest lines in the Whistler bike park. Supportive, Controlled and Progressive Suspension Performance The suspension is designed to be super supple off the top, whilst being supportive in the mid-stroke and progressive throughout the rest of the travel. The anti-squat is optimised to ensure the Giga descends like a hooligan yet behaves itself on the climb back to the top for the next run. The suspension platform is based on the same horseshoe driven linkage as Nukeproof’s award-winning Dissent downhill frame, albeit now with a 2-stage main pivot flip chip. Using an eccentric axle system, riders can alter the Kinematic progressivity, so the bike can be tailored to suit the conditions on the trail with only an 8mm Allen key. Setting 1 = 25.5% progression Setting 2 = 29% progression Both settings have a super supple beginning for small bump compliance. They also both have good mid-stroke support for better cornering and pumping. Like the Dissent, the progression drops off in the end stroke to prevent mid-stroke harshness or spiking and allows more tuning options with volume spacers. The + Progressive setting can be used to add shock progression on a coil set up just like adding a volume spacer to an air shock. The added suppleness is also good in wet and slippery conditions. Robust and Lightweight Carbon Fibre Frameset The Giga Frame is constructed completely from UD 700/800 Carbon fibre. This allowed Nukeproof to optimise the stiffness and compliance of the frame parts individually. The front triangle has been tailored for stability and precision, whilst the rear triangle was designed for compliance to help tracking and provide grip. Another bonus of the carbon rear triangle is that it has a lower un-sprung mass for ultimate suspension performance. To ensure a perfectly dialled fit Nukeproof now offer the 297 bikes in S, M, or L sizes and the 290 bikes in M, L, XL or XXL. The frame geometry is Long, Low, Slack and Steep as it is based around their saddle offset principle, which ensures the seated riding position is tailored across all sizes, with steeper seat angles on bigger frames. The Seat tube is also designed for maximum seat post insertion to allow maximum drop. Fox Suspension and Shimano XT 12-Speed Groupset This Factory specification is designed as the perfect privateer's race bike. Spec'd with custom-tuned Fox Factory 38 and X2 suspension. The drivetrain is from Shimano’s bulletproof performance 10-51 range XT groupset. The braking performance is from Shimano’s ultra-powerful XT 4 pot brakes. The all-carbon frame rolls on DT Swiss EX1700 wrapped in Maxxis Tubeless Ready tyres. Water Bottle and Accessory Mounts and Integrated Rear Mudguard The Giga is also sculptured to fit a 750ml water bottle (carbon bottle cage included) as well as an accessory mount under the top tube for emergency trail tools. All models also feature an integrated rear mudguard and plenty of clearance for up to 2.5” tyres. The frames feature a clear paint protection kit as standard with 3D contoured rubber downtube, seat and chainstay protection. The Nukeproof GIGA: Gluttony is not a sin. Please Note: Due to severe delays in the bicycle supply chain, we have been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table for accurate information. Features: Frame: Nukeproof Giga 290 Carbon, 170mm Travel, ultra-strong monocoque UD Carbon Fibre frame, adjustable main pivot, internally piped cable routing, ISCG 05 mounts, Enduro Bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection and Factory fitted clear paint protection kit covering TT/DT/CS/SS Fork: Fox 38 Float, Factory Series, Kashima, Grip 2 Damper, 180mm, 44mm Offset, BOOST, Orange Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom LCM, LRM tune, 205x60mm, Trunnion with Bearing End Front Wheel: DT Swiss EX1700 SPLINE 30,29", 6 Bolt, 110x15mm Rear Wheel: DT Swiss EX1700 SPLINE 30, 29", 6 Bolt, Shimano Microspline Driver, 148x12mm Tyres: Front: Maxxis Assegai 29" x 2.5 WT, 3C MaxxGrip DD TR, Rear: Maxxis Minion DHR II 29” x 2.4 WT, 3C MaxxTerra DD TR Crankset: Shimano XT M8100 12-Speed, Hollowtech 2, 170mm, 30T, 52mm Chainline Shifter: Shimano XT M8100-R, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano XT M8100, SGS 12-Speed, Shadow Plus Chain: Shimano XT M8100 HG 12-speed Inc Quicklink Cassette: Shimano XT M8100-12, 12-Speed (HYPERGLIDE+), 10-51T Chain Guide: Nukeproof guide with Bash, 28-36T, ISCG-05, Black Brakes: Shimano XT M8120, 4 Pot Brake, Metallic Pads Front Rotor: Brakco, 203mm Rear Rotor: Brakco, 203mm Handlebars: Nukeproof Horizon V2 25mm Rise, Width - M780mm, L800mm, XL800mm, XXL800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Bikeyoke Divine Stealth with Brand-X Remote lever, M:160mm drop; L/XL/XXL:185mm drop Headset: Nukeproof, 44-56 IITS Grips: Nukeproof Sam Hill Signature Accessories: Nukeproof Carbon Water Bottle Cage Weight: 15.51kg Medium Tubeless Key Information: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 180mm Axle to Crown: 594mm Fork Offset: 44mm Rear Travel: 170mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x 6901-2RS MAX, 4x 6902-2RS MAX, 2x6804-2RS MAX, 2x 6900-2RS MAX Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
EVERY TRAIL EVERY STEEP CLIMB EVERY THRILLING DESCENT. TESTED AND DEVELOPED BY GIANT’S E-BIKE ENDURO PROS THIS UPDATED TRAIL RIPPER GIVES YOU THE POWER TO ENJOY THE BEST PARTS OF THE RIDE AGAIN AND AGAIN. Trail technology Proven Maestro rear suspension (160mm) and a powerful but compact SyncDrive Pro motor technology boost your capabilities on steep climbs and rugged descents. Total control RideControl Ergo 3 offers integrated user-friendly button controls that are easy to use. The Giant E-bike App gives you tuning options and E-bike specific fitness tracking. Long-lasting power Climb steep mountains and enjoy fun descents all day long with the downtube-integrated EnergyPak How far can I expect to ride on a single battery charge? The range for a single battery charge can vary greatly depending on conditions such as the combined weight of the rider and cargo; wind resistance; tyre pressure and tread profile; terrain and elevation changes; road or trail surface; outdoor temperature; maintenance of the E-Bike; and the condition of the battery. The bar below gives an approximate range. Conditions are categorized as extreme good and ideal. Extreme conditions typically occur when riding with a heavy load strong headwinds or excessive climbs. Highlights A 29-inch front wheel and 27.5-inch rear wheel work together to offer superior handling and agility on technical terrain. The updated frameset features new geometry with a shorter rear end and longer reach. New control units include RideControl Go which is integrated into the top tube and RideControl Ergo 3 attached to the handlebar near the grip. A new flip chip feature lets you adjust frame geometry for riding style and terrain. Motor SyncDrive Pro 85Nm powered by Yamaha Controller RideControl Ergo 3 grip integrated Display RideControl GO frame integrated LED displayANT+ Wireless display compatible Battery EnergyPak Smart 625WhEnergyPak Plus range extender compatible Charger EnergyPak 6A smart charger Sizes S M L XL Colours Amber Glow Frame ALUXX SL-grade Aluminum Advanced Forged Composite Upper Rocker 160mm Maestro suspension system 'Boost' 148x12mm UDHTM derrailleur hanger Fork RockShox Domain R 29er 170mm travel 15x110 Boost Maxle Stealth E-bike Approved Shock Fox Float DPS Performance EVOL Large Volume sleeve 2-position lever 205x62.5mm Trunnion mount custom tuned Handlebar Giant Contact Trail 35x800mm Grips Giant Tactal Pro-E single lock-on Stem Giant Contact SL 35 Seatpost Giant Contact Switch dropper 309mm (S:125 M: 150 L/XL:170) Saddle Giant Romero Trail Pedals Flat pedal Shifters Shimano Deore Front Derailleur MRP 1X HD2 custom co-molded chain guide Rear Derailleur Shimano Deore 12-speed Brakes Shimano Deore BR-M4120 4-piston hydraulic disc 203mm Brake Levers Shimano Deore BL-M4100 I-spec EV Cassette Shimano Deore CS-M6100-12 10-51T 12-speed Chain KMC e.12 Turbo EcoProteq e-bike optimised Crankset Praxis WaveTM 36T Cold Forged 4130 premium steel Praxis e-Cadet+ custom forged crankarm set (S/M:160 L/XL:165) Bottom Bracket - Rims Giant AM 29'[F] 27.5'[R] Tubeless ready 30mm inner width Hubs Shimano MT410 Boost Center-Lock [F] 110x15 [R] 148x12mm Micro-Spline Drive Body Thru-axle Spokes Sapim E-Lite [r] Race [f] Tyres Maxxis Minion DHF 29x2.6' foldable Tubeless EXO+ 3C MaxxTerra[F]Maxxis High Roller II 27.5x2.5' foldable Tubeless DoubleDown 3C MaxxTerra Compound [R] Extras Tubeless kit (liquid valves levers manual tool) Lighting Optional:- Giant Recon series e-bike lights available and direct connectable Lock Torx 25 Battery Lock with built-in Torque limiter Weight The most accurate way to determine any bike’s weight is to have your local dealer weigh it for you. Many brands strive to list the lowest possible weight but in reality weight can vary based on size finish hardware and accessories. All our bikes are designed for best-in-class weight and ride quality.
Same RS experience but in aluminumLike its carbon sister, Rise Aluminum’s power comes from an EP8 RS motor, developed in an exclusive collaboration between Orbea and Shimano.Orbea acted on the motor firmware to offer the most natural and efficient assistance as possible, eliminating drag and power delay that’s typical of conventional ebikes. The motor was also optimized to provide maximum assistance between 75 and 95 strokes per minute, the cadence at which the human body pedals the most efficiently and where we normally pedal our standard mechanical bikes.This means that the harder we pedal, Rise responds instantly with more power, with a feeling of natural assistance.Another unique aspect of the RS philosophy is its autonomy. Due to the lower power consumption, the lower weight of the bike and the greater dependence on the rider’s legs, the battery in Rise lasts about 50% more compared to a standard ebike. This translates into surprising autonomy for the 360Wh battery in the carbon models and a whopping 540Wh in the aluminum models with a completely redesigned battery.Weight is another key to Rise and something Orbea invested many hours in to optimize the details of the models: frame, integrated battery, cable routing and push buttons were taken into account. Motor optimization through the Rider Synergy also allows for trail components to be mounted, which saves weight and enables the bike to handle like a mechanical trail bike.The lightest in the category, also in aluminumNatural pedaling and handling are the two aspects that differentiate Rise the most. To keep these characteristics intact in the aluminum versions, Orbea’s engineering team scrutinized all the details and invested many hours in development.The recently debuted aluminum version features a completely redesigned 540Wh battery, developed by Orbea, who rethought the distribution of the 21,700 cells, the housing arrangement, the wiring and the brackets to find a battery that is as optimized and lightweight as possible and with one of the highest energy densities on the market.For the frame, Orbea selected the best materials and applied the most advanced manufacturing processes, just as it does for its highest-level carbon frames. Thanks to the double- and triple-butted, hydroformed tubes, the team optimized the thickness and shapes of the tubes and reinforced the most delicate areas. In other words, it saves weight where you don’t need material and adjusts the stiffness in the important areas.In effort to give the highest level of attention to the new aluminum version, Orbea applied its polishing process to the frame. This technique smooths the welds at the tube joints, matching the aesthetics of a carbon frame. In fact, it’s difficult to discern the differences between an aluminum frame and carbon frame. This process also increases aluminum’s fatigue resistance in critical areas.All this design and development work has resulted in an aluminum frame weight of merely 3.4kg — just 100g more than an Occam aluminum frame and 2kg lighter than most aluminum ebikes on the market. The total weight of the new aluminum Rise is an impressive 19kg for the top-of-the-range model and 20kg for the entry-level model.
We can’t pretend not to be excited about the future of electric mountain bikes, which is why we’ve jumped head-first into the deep end. Our e-MTB lineup has something for everyone whether you’re a hardcore freerider or just taking to the backyard dirt paths. From the Remote 160 all the way to the El Kahuna there’s an e-MTB that suits your needs. Climb bigger mountains, ride longer, and do more laps than ever before. Whether you’re looking to do more epics or are someone that’s short on time, an e-MTB opens up a ton of doors. The only question that remains is where will your e-MTB take you?The Remote 160 brings the joy of a longer travel of an e-MTB to the masses. A 29” wheeled ripper, this bike brings all the fun of a 160mm travel e-MTB in a more affordable package. A Shimano motor and battery provide a customizable amount of pedal-assist ensuring you have the exact amount of power you want when you want it. Ultra-powerful hydraulic disc brakes and 200mm rotors front and rear provide controlled stopping even when you’re hauling ass on steeper terrain. No matter what your reasoning, the Remote 160 will have you laughing up and down the trails.FEATURESKONA 6061 ALUMINUMKona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing’s wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame’s strength and ride characteristics depending on its intended application.INTERNAL HEADSETBearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible.TAPERED HEAD TUBEMore girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed.TUBELESS COMPATIBLE RIMSTubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems.12x157mm AXLE12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. For 2017, you’ll see the 12x148 Boost standard in the mix. Boost spacing provides more tire clearance at the chainstay yoke, while the rear wheel is stiffer and more durable relative to a 12x142 thru-axle.BEAMER INDEPENDENT SUSPENSIONBuilt to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call “pure shock movement,” whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.
Having won nearly every test in which it was featured, there was only one thing we could do to make the Ransom more fun and versatile: make an E-Bike version. Ransom eRIDE - more ups, more down, more hoots, more hollers, more Ransom.
Power up to trail riding's next level and dominate any and all trail monsters-the Turbo Kenevo Super Light melds the legendary handling and all-around big trail prowess of the Enduro with our Super Light electric support to deliver indomitable capability, light weight, and power to conquer more and bigger trails.The Turbo Kenevo Super Light motor/controller system is a full integration of the bike's 250-watt motor and 320Wh battery with a radically advanced and seamlessly integrated controller. The result is massive power delivered, up to 20mph/32kph, to get you to the top of your favorite descent with just half of the effort, and much faster, giving even more of the quality ride you yearn for, and more of it than ever before possible..Our next-generation TCU2 is your information hub, with customizable display fields including the exact percentage of battery level, and features our all-new, bar-mounted MicroTune function to adjust power delivery in 1O"6 increments, so you get exactly the support you need to experience precisely the ride you want..29” wheels front and rear deliver a nimble ride that carves circles around other full-power e-MTBs. A generous cockpit centers you on the bike, optimizing traction and corner control. The low bottom bracket, slack hcadtube angle and reduced fork offset keep things stable in the rough..The Turbo Kenevo Super Light geometry can be fine-tuned for wherever and however you ride. Six distinct geometry settings allow easy adjustment to hone performance in any terrain. Head angle can be adjusted between 63 and 65.5 degrees. Bottom bracket height can be fine-tuned up or down by 7mm. We've never made a more adjustable, adaptable trail bike..The Turbo Kenevo Super Light's 17Omm of Enduro-inspired travel is supple on small bumps, devours square-edged hits without a twitch, eats massive G-outs for breakfast, yet still offers amazing pedal response and delivers your power to the ground with total efficiency..The Turbo Kenevo Super Light's S-Sizing is based on what matters-rider size and style, not inseam. Six sizes, all with similar headtube lengths and standover, allow you to choose the size that best suits your individual style. Smaller S-Size numbers are going to be nimble and more flickable, while bigger S-Sizes deliver more stability and a roomier ride..