With a 130mm fork combined with 125mm of rear suspension, the Reactor ST combines the best of an enduro bike (long, low and slack) with the best of an XC Race bike (lightweight spec and efficient suspension) to create a sprightly yet seriously capable machine. Frame Construction: To optimise the weight, strength and stiffness, the Reactor 290 ST Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). Adjustable Geometry: The Reactor ST features a 66.8° (66.3° Low) Headangle atop a 76.3° (75.8° Low) seat angle across a 460mm reach on a Medium frame. We also offer the frame in Large and X-Large sizes. The Reactor ST frames feature the same “flip chip” design as the regular Reactor frame to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor ST into a more aggressive machine, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design: To ensure the bike could climb as well as it descends, we designed the four-bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor ST some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor ST is designed to reward the rider and ensure you get that stoke factor in on any ride. Full Specification List: • Frame: Nukeproof Reactor 290 Carbon, 125mm Travel, UD woven Carbon Fibre frame, internal cable routing, ISCG 05 mounts, Enduro bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection • Fork: Fox 34 Float, Factory Series, Kashima, Grip 2 Damper, 130mm, 44mm Offset, BOOST, Black • Shock: Fox Float DPS, Factory Series, Kashima, 3 Position, EVOL LV, Custom LCL, LRL, CMF tune, 210x47.5mm, Bearing End 1x 0.2 Spacer fitted. • Front Wheel: Reynolds TR309 XC Front 28h, 29", Center-Lock, 110x15mm • Rear Wheel: Reynolds TR289 XC Rear 28h, 29", Center-Lock, Shimano Microspline Driver, 148x12mm • Tyres: Front: Maxxis Minion DHF 29”x2.3 3C MaxxTerra/EXO/TR, Rear: Maxxis Agressor 29”x2.3 MaxxTerra/EXO/TR • Crankset: Shimano XT M8100 12-Speed, Hollowtech 2, 170mm, 30T, 52mm Chainline • Shifter: Shimano XT M8100-R, 12-speed Rapidfire Plus, I-Spec EV • Rear Derailleur: Shimano XT M8100, SGS 12-Speed, Shadow Plus • Chain: Shimano XT M8100 HG 12-speed Inc Quicklink • Cassette: Shimano XT M8100-12, 12-Speed (HYPERGLIDE+), 10-51T • Brakes: Shimano XT M8100, 2 Pot Brake, Metallic Pads • Front Rotor: Shimano RT-MT800, 180mm • Rear Rotor: Shimano RT-MT800, 180mm • Handlebars: Nukeproof Horizon Carbon V2 25mm Rise, Width - M780mm, L800mm, XL800mm • Stem: Nukeproof Horizon, 45mm, Black • Saddle: Nukeproof, Black • Seatpost: Bikeyoke Divine Stealth w Shimano SL-MT500-IL Remote lever, M:160mm drop; L/XL:185mm drop • Headset: Nukeproof, 44-56 IITS • Grips: Nukeproof Sam Hill Signature • Weight: TBD Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table for accurate information. Key Specifications: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 130mm Axle to Crown: 537mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x47.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
The Escarpe 275 CRX frame features a T800 carbon fibre construction and it is equipped with a Fox Float DPS Factory Series rear shock, this frame is ready to be the foundation of your next hardcore all-mountain bike build. This stylish high-end MTB frame is optimised to provide exceptional trail riding responsiveness, agility and control in all riding conditions. And its adjustable flip-chip suspension platform can be easily fine-tuned to fit your riding style and suspension performance requirements. Agile, Efficient and Stable Full Suspension Trail Frame At the core of the Vitus all-mountain and trail range is the Escarpe CRX Mountain Bike Frame. Bringing forward all that was loved from the previous Escarpe platforms, this latest version has undergone the most comprehensive development yet to deliver a ride experience that’s more controlled, efficient, predictable and stable, whatever the terrain. Climb ahead? No problem. Technical descent inbound? You’ve got this. This performance full-carbon frameset is the perfect starting point to build your dream trail and all-mountain bike. To ride faster, to discover that perfect line, to flow effortlessly where before you tiptoed, your bike and body need to speak the same language. Thankfully the Escarpe knows exactly how to read you and the trail. For Trail and All Mountain Riding Whether braking hard, pushing more power or negotiating a twisty descent, your centre of gravity is rarely constant, so key to the whole system is efficiency. To deal with the dynamic nature of trail riding, the Escarpe stays predictable and consistent so that you can stay loose. No white knuckles here. The suspension kinematics have been enhanced compared to the previous platform, further countering the effects of pedal-bob and reducing the harshness of small bumps and trail vibrations that drain your energy and kill speed. Smoother is faster for longer. With an adjustable flip-chip, that can raise the bottom bracket by 6mm and increase the head angle, you can also customise the setup to best suit how and where you ride. Additionally, geometry and performance are optimised throughout the size range, so whether you are S or XL, there’s no compromise on how this bike feels. Key Features: Full T800 frame sheds weight for a truly responsive ride 27.5" platform for maximum agility Adjustable flip-chip to fine-tune handling and your preferred feel Ultra-Smooth Fox Float DPS Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areas Features: Frame: Escarpe full T800 carbon front and rear triangles, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru axle Rear Shock: Fox Float DPS Factory Series, Kashima coating, Grip2 air spring, EVOL, 3 position lever, 205mm x 60mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/28.6 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 36.4mm Diameter Wheel Size: 27.5" Weight: Medium: 3.1kg Suspension Travel: 150mm Front, 140mm Rear Intended Use: Trail / All Mountain
This hard-hitting full suspension frame features a carbon/alloy frame that strikes the perfect balance of strength, agility and weight and is equipped with a Kashima-coated Fox Float X2 Factory Series rear shock. This rear shock complements the Sommet Enduro Platform Modern geometry with an adjustable flip-chip suspension system gives you exceptional control and composure over all terrains and ensures outstanding rear-wheel traction anywhere. The big-hitting Vitus Sommet 275 MTB frame has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility. So, whether flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill-seekers and the diehards. This is why you do it. As the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet CRX has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays. It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike. Key Features: Frame Material: T700 carbon fibre front triangle, 6061-T6 aluminium rear Big-hitting enduro frame with modern geometry 27.5" platform for maximum agility Adjustable flip-chip to fine-tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areas Carbon Sommet Enduro Platform Modern geometry with adjustable flip-chip, improved suspension kinematics and a smile-inducing ride Features: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, 2 position lever, 205mm x 65mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 36.4mm Diameter Wheel Size: 27.5" Recommended Suspension Travel: 170mm Front, 170mm Rear Intended Use: Enduro Weight: 4.7kg (with shock)
The Escarpe 275 frame features a T800 carbon fibre construction and it is equipped with a Fox Float DPS Factory Series rear shock, this frame is ready to be the foundation of your next hardcore all-mountain bike build. This stylish high-end MTB frame is optimised to provide exceptional trail riding responsiveness, agility and control in all riding conditions. And its adjustable flip-chip suspension platform can be easily fine-tuned to fit your riding style and suspension performance requirements. Agile, Efficient and Stable Full Suspension Trail Frame At the core of the Vitus all-mountain and trail range is the Escarpe CRX Mountain Bike Frame. Bringing forward all that was loved from the previous Escarpe platforms, this latest version has undergone the most comprehensive development yet to deliver a ride experience that’s more controlled, efficient, predictable and stable, whatever the terrain. Climb ahead? No problem. Technical descent inbound? You’ve got this. This performance full-carbon frameset is the perfect starting point to build your dream trail and all-mountain bike. To ride faster, to discover that perfect line, to flow effortlessly where before you tiptoed, your bike and body need to speak the same language. Thankfully the Escarpe knows exactly how to read you and the trail. For Trail and All Mountain Riding Whether braking hard, pushing more power or negotiating a twisty descent, your centre of gravity is rarely constant, so key to the whole system is efficiency. To deal with the dynamic nature of trail riding, the Escarpe stays predictable and consistent so that you can stay loose. No white knuckles here. The suspension kinematics have been enhanced compared to the previous platform, further countering the effects of pedal-bob and reducing the harshness of small bumps and trail vibrations that drain your energy and kill speed. Smoother is faster for longer. With an adjustable flip-chip, that can raise the bottom bracket by 6mm and increase the head angle, you can also customise the setup to best suit how and where you ride. Additionally, geometry and performance are optimised throughout the size range, so whether you are S or XL, there’s no compromise on how this bike feels. Key Features: Full T800 frame sheds weight for a truly responsive ride 27.5" platform for maximum agility Adjustable flip-chip to fine-tune handling and your preferred feel Ultra-Smooth Fox Float DPS Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areas Features: Frame: Escarpe full T800 carbon front and rear triangles, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru axle Rear Shock: Fox Float DPS Factory Series, Kashima coating, EVOL, 3 position lever, 205mm x 60mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/28.6 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 36.4mm Diameter Wheel Size: 27.5" Weight: Medium: 3.1kg Suspension Travel: 150mm Front, 140mm Rear Intended Use: Trail / All Mountain
The Sommet 290 frame features a durable and lightweight front triangle and a reliable and stiff alloy rear triangle, giving you the perfect balance of strength, agility and control at a low weight. Vitus has as equipped it with a top-level Kashima-coated Fox Float X2 Factory Series rear shock that pairs well with the Sommet's adjustable flip-chip suspension system. The big-hitting Vitus Sommet 290 MTB frame has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility. So, whether flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill-seekers and the diehards. This is why you do it. As the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, the Sommet has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays. It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike. Key Features: Frame Material: T700 carbon fibre front triangle, 6061-T6 aluminium rear Big-hitting enduro frame with modern geometry 29" platform for flat out speed Adjustable flip-chip to fine-tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areas Carbon Sommet Enduro Platform Modern geometry with the adjustable flip-chip, improved suspension kinematics and a smile-inducing ride Features: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, 2 position lever, 205mm x 62.5mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 36.4mm Diameter Wheel Size: 29" Suspension Travel: 170mm Front, 162mm Rear Intended Use: Enduro Weight: 4.8kg (with shock)
The Escarpe 29 CRX frame features top-quality T800 carbon fibre front and rear triangles and it is equipped with a Fox Float DPS Factory Series Kashima coated rear shock. Ready to be the backbone of your stylish hardcore all-mountain trail bike, this frame offers outstanding responsiveness, agility, strength and control at a low weight. It also features Vitus' flip-chip adjustable suspension system that enables you to easily fine-tune its suspension performance to suit your riding style. Agile, Efficient and Stable Full Suspension Trail Frame At the core of the Vitus all-mountain and trail range is the Escarpe CRX Mountain Bike Frame. Bringing forward all that was loved from the previous Escarpe platforms, this latest version has undergone the most comprehensive development yet to deliver a ride experience that’s more controlled, efficient, predictable and stable, whatever the terrain. Climb ahead? No problem. Technical descent inbound? You’ve got this. This performance full-carbon frameset is the perfect starting point to build your dream trail and all-mountain bike. To ride faster, to discover that perfect line, to flow effortlessly where before you tiptoed, your bike and body need to speak the same language. Thankfully the Escarpe knows exactly how to read you and the trail. For Trail and All Mountain Riding Whether braking hard, pushing more power or negotiating a twisty descent, your centre of gravity is rarely constant, so key to the whole system is efficiency. To deal with the dynamic nature of trail riding, the Escarpe stays predictable and consistent so that you can stay loose. No white knuckles here. The suspension kinematics have been enhanced compared to the previous platform, further countering the effects of pedal-bob and reducing the harshness of small bumps and trail vibrations that drain your energy and kill speed. Smoother is faster for longer. With an adjustable flip-chip, that can raise the bottom bracket by 6mm and increase the head angle, you can also customise the setup to best suit how and where you ride. Additionally, geometry and performance are optimised throughout the size range, so whether you are S or XL, there’s no compromise on how this bike feels. Key Features: Full T800 frame sheds weight for a truly responsive ride 29" platform balancing speed and efficiency Adjustable flip-chip to fine-tune handling and your preferred feel Modern geometry with adjustable flip-chip, improved suspension kinematics and a smile-inducing ride. Ultra-Smooth Fox Float DPS Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areas Features: Frame: Escarpe full T800 carbon front and rear triangles, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru axle Rear Shock: Fox Float DPS Factory Series, Kashima coating, EVOL, 3 position lever, 205mm x 60mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/28.6 lower to suit 1-1/8"" upper tapered to 1.5"" lower headtube Seat Screw: Vitus, 36.4mm Diameter Wheel Size: 29" Weight: Medium: 3.1kg Suspension Travel: 150mm Front, 140mm Rear Intended Use: Trail / All Mountain
The Sommet 297 frame features a carbon/alloy construction and is optimised for enduro racing. It offers a sublime balance of high-speed control, exceptional pedalling efficiency and all-day riding comfort. It is also equipped with a 170mm-travel Kashima-coated Fox Float X2 Factory Series rear shock and features geometry that's ideal for use with 170mm-travel suspension forks. This big-hitting Vitus Sommet 297 Mountain Bike frame, specifically designed for a mullet wheel setup, has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility. So, whether you're flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill-seekers and the diehards. This is why you do it. Long-Travel Enduro Race Frame for Mixed-Wheel Platform As the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, the Sommet 297 has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays. Dial-in your perfect mullet setup by fitting a big party 29er in the front to keep the rolling momentum high and a business 27.5 at the back for traction and sharp acceleration. The Sommet is not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike. Key Features: Big-hitting enduro frame with modern geometry Mullet 29" front, 27.5" rear platform balancing speed and agility Adjustable flip-chip to fine-tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areas Features: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru-axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, 2 position lever, 205mm x 65mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 36.4mm Diameter Carbon Sommet Enduro Platform: Modern geometry with an adjustable flip-chip, improved suspension kinematics and a smile-inducing ride Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: Enduro
The adidas Terrex Women's Mountain Tights are incredibly versatile and great for all your outdoor activities. The tights are constructed from adidas’ Primeblue high-performance, recycled material which is rugged while providing plenty of stretch allowing complete freedom of movement. The tights are engineered with TERREX elastic seams and a TERREX wide waistband, keeping the tights in place while delivering an unrestricted range of movement. The tights also keep you seen, in low lighting environments, with TERREX reflective branding which improves visibility.
Pay tribute to the great outdoors with the men's adidas Terrex Mountain GFX Tee. Made with a recycled cotton blend, it supports sustainable cotton farming, and comes in soft jersey with a classic ribbed crew-neck style. Finished with a printed logo at the chest, as well as a mountain graphic at the back.
If you're not on the trail, then you're probably planning the next time you will be. The adidas Terrex Women's Patch Mountain Tee pays tribute to your favourite outdoor spaces, made with a recycled cotton blend it supports sustainable cotton farming, and comes in soft jersey with an adidas Terrex branded neck tape. Finished with a woven mountain patch on the chest, seam patterns to reduce chafing while wearing a pack, and a longer hem for extra coverage.
Pay tribute to the great outdoors with the adidas Terrex Women's Mountain FU Tee. Made with a recycled cotton blend, it supports sustainable cotton farming, and comes in soft jersey with a classic ribbed crew-neck style. Finished with a printed logo at the chest, as well as a mountain graphic at the back.
If you're not on the trail, then you're probably planning the next time you will be. The men's adidas Terrex Patch Mountain Tee pays tribute to your favourite outdoor spaces, made with a recycled cotton blend it supports sustainable cotton farming, and comes in soft jersey with an adidas Terrex branded neck tape. Finished with an engineered mountain patch on the chest.