Well-equipped for fast and intense trail riding, this full suspension mountain bike (MTB) frame features a high-quality aluminium build that's specifically developed for the most demanding of rides. Nukeproof has put this model through a hydroforming and triple-butting process to ensure maximum strength and durability as you carve your way around the mountain. In addition, it is kitted out with a RockShox Super Deluxe Coil Ultimate DH RC rear shock that provides smooth and consistent rear end suspension performance as you charge from trail to trail. Another highlight is its comfortable geometry that includes internal cable routing for a clean, sleek finish. “It makes me want to race some World Cups again (Sam Hill)". Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world’s fastest racers. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were: - Simplify the design, to drop the weight and increase the front triangle stiffness. - More progressive leverage rate to increase the mid stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride. Structurally the most obvious change is an all-new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent’s rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time. Trail-Ready Full Suspension Alloy MTB Frame The suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse. The Dissent platform was originally conceived by Nukeproof's engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, the brand created something much better than expected, and the prototype won on its international debut at Crankworx festival’s Garbanzo Downhill race with Sam Hill. It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent frame now offers riders the choice of four main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate. The main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider! Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you’re riding, your height or riding style. The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157mm x 12mm rear axle to keep things stable at the rear. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Size Options: S/M/L/XL Fork Travel: 200mm Axle to Crown: 581mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm BB: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Dissent 275 Alloy, 200mm Travel Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (S=300LBS/M=350LBS/L=400LBS /XL=450LBS SPRING) Headset: Nukeproof, 49IITS Custom-tuned rear shock configuration Internal cable routing Enduro Bearings Threaded 83mm BB Boost 157mm rear axle spacing 3D contoured frame protection Three-stage Dissent linkage Four-position adjustable linkage progression chip system Three-position adjustable chainstay length Weight: 5.03kgs/11lbs
This full-suspension mountain bike (MTB) frame comes kitted out with a hydroformed and triple-butted 6061 aluminium build, which makes it impressively tough and dependable as you charge from trail to trail. Nukeproof has also equipped this model with race-ready geometry that includes internal cable routing for a hassle-free, sleek finish. Another highlight is its 157x12mm Boost rear hub spacing, which allows for maximum stiffness and control on the more demanding of terrain conditions. Coming complete with a RockShox Super Deluxe Coil Ultimate DH RC rear shock, this frame is engineered for smooth and consistent performance, wherever the trail leads you. “It makes me want to race some World Cups again (Sam Hill)". Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world’s fastest racers. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were: - Simplify the design, to drop the weight and increase the front triangle stiffness. - More progressive leverage rate to increase the mid stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride. Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent’s rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time. Race Ready Full Suspension MTB Frame The suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse. The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival’s Garbanzo Downhill race with Sam Hill. It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate. The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider! Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you’re riding, your height or riding style. The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 190mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157mm x 12mm rear axle to keep things stable at the rear. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Size Options: M/L/XL Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 190mm Wheels Size: 29" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x70mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm BB: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Dissent 290 Alloy, 190mm Travel Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x70mm, Bearing End, Red Coil Spring (M=400LBS/L=450LBS /XL=500LBS SPRING) Headset: Nukeproof, 49IITS Custom-tuned rear shock configuration Internal cable routing Enduro Bearings Threaded 83mm BB Boost 157mm rear axle spacing 3D contoured frame protection Three-stage Dissent linkage 4 position adjustable linkage progression chip system 3 Position adjustable chainstay length Weight: 5.14kgs/11.3lbs
“It makes me want to race some World Cups again (Sam Hill)". Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world’s fastest racers. This full-suspension mountain bike (MTB) frame comes equipped with a robust 6061 aluminium construction that's been put through a hydroforming and triple-butting process for exceptional strength, durability and toughness as you hit your favourite trails. Specifically developed for riders who want to complete their mullet bike setup, this model also allows for a 29" front wheel and a 27.5" rear wheel to be fitted. Another benefit is its 157x12mm rear hub Boost axle spacing, which gives you stiff and responsive handling, wherever your next ride takes you. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were: - Simplify the design, to drop the weight and increase the front triangle stiffness. - More progressive leverage rate to increase the mid-stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride. Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent’s rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time. Lightweight Full Suspension MTB Frame with 200mm Travel The suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse. The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival’s Garbanzo Downhill race with Sam Hill. It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent Frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate. The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider! Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you’re riding, your height or riding style. The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157x12mm rear axle to keep things stable at the rear. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Size Options: M/L/XL Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm BB: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Dissent 297 Alloy, 200mm Travel Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (M=350LBS/L=400LBS /XL=450LBS SPRING) Headset: Nukeproof, 49IITS Custom-tuned rear shock configuration Internal cable routing Enduro Bearings Threaded 83mm BB Boost 157mm rear axle spacing 3D contoured frame protection Three-stage Dissent linkage 4 position adjustable linkage progression chip system 3 Position adjustable chainstay length Weight: 5.06kgs/11.1lbs
The Dissent 297 Comp features superb components and a 297 mixed-wheel standard. With a 29" front wheel and a 27.5" rear, this downhill (DH) bike rolls fast and stable through rough terrain while staying agile and playful. Nukeproof has equipped it with long-travel RockShox Boxxer Select forks, a Super Deluxe Coil Select rear shock and a SRAM GX DH 7-Speed groupset. This groupset includes a SRAM Descendant DH chainset, a downhill-specific GX DH 7-Speed 11-25T cassette and SRAM Guide RE hydraulic disc brakes. It also rolls upon Sun-Ringle Duroc SD37 wheels wrapped in Tubeless Ready Michelin DH22 2.4"-wide tyres. “It makes me want to race some World Cups again” - Sam Hill Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world’s fastest racers. Suspension design and frame details: The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, we created something much better than expected, and the prototype won on its international debut at Crankworx festival’s Garbanzo Downhill race with Sam Hill. Adjustable Suspension Main Pivot Flip Chip It is not uncommon for different World Cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip-chip, designed to essentially work like a bottomless token for a coil shock. The Dissent Frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate. The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider. Further custom tuning can be done via new 3 position adjustable chainstay that features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you’re riding, your height or riding style. The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence-inspiring 63-degree head angle and 200mm of travel via our new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157mm x 12mm rear axle to keep things stable at the rear. Features: Frame: Nukeproof Dissent 297 Alloy, 200mm Travel, custom triple butted hydro-formed tube set, custom-tuned rear shock configuration, internal cable routing, Enduro bearings, threaded bottom bracket, boost 157mm rear axle spacing, 3D contoured frame protection Fork: RockShox Boxxer Select Charger RC 200mm Travel, 46mm Offset, BOOST 20x110mm, Debonair, Gloss Black Shock: RockShox Super Deluxe Coil Select R, Custom Tune, 250x75mm, Bearing End, Black Coil Spring (S=300LBS/M=350LBS/L=400LBS /XL=450LBS SPRING) Front Wheel: Sun-Ringle Duroc SD37 Comp 29", 20x110mm Rear Wheel: Sun-Ringle Duroc SD37 Comp 27.5", HG Freehub, 157x12mm Tyres: Front: Michelin DH22 29”x2.4, TLR/ Rear: Michelin DH22 27.5”x2.4, TLR Crankset: SRAM Descendant DH, 165mm, 34T, DUB83mm Chain Device: MRP G4 CS 34-38T ISCG 05 Shifter: SRAM GX 7-Speed Rear Derailleur: SRAM GX DH 7-Speed Chain: SRAM PC-1110 11-Speed Cassette: SRAM GX DH 7-Speed, PG720 11-25T Brakes: SRAM Guide RE Front Rotor: SRAM Centreline, 220mm Rear Rotor: SRAM Centreline, 200mm Handlebars: Nukeproof Neutron V2 25mm Rise, Width – S780mm, M780mm, L800mm, XL800mm Stem: Nukeproof Horizon Direct Mount, 45mm, Black Saddle: Nukeproof Seatpost: Nukeproof Neutron, 30.9mm, 300mm, 0 Offset Headset: Nukeproof, 49IITS Grips: Nukeproof Sam Hill Signature Weight: 17.3kg Medium Tubeless Key Information: Dissent 297 Material: Hydroformed 6061 Triple-Butted Aluminium Size: S/M/L/XL Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: Front: 29"; Rear: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm BB: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Dissent 297 RS Alloy features RockShox Boxxer Ultimate forks and a Super Deluxe Coil rear shock that offers all-terrain control and exceptional traction and grip. SRAM’s high-end XO1 groupset with a XO1 DH Carbon chainset, a 7-Speed 11-25T cassette and SRAM Code R hydraulic disc brakes give you fast and dependable gear shifting, powerful all-weather braking and stylish race-ready performance. Rolling upon Nukeproof Horizon V2 DH wheels wrapped in Tubeless Read Michelin DH22 2.4"-wide tyres, this bike is built for high-level racing straight out of the box. “It makes me want to race some World Cups again” - Sam Hill Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world’s fastest racers. Suspension design and frame details: The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, we created something much better than expected, and the prototype won on its international debut at Crankworx festival’s Garbanzo Downhill race with Sam Hill. Adjustable Suspension Main Pivot Flip Chip It is not uncommon for different World Cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip-chip, designed to essentially work like a bottomless token for a coil shock. The Dissent Frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate. The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider. Further custom tuning can be done via new 3 position adjustable chainstay that features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you’re riding, your height or riding style. The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence-inspiring 63-degree head angle and 200mm of travel via our new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157mm x 12mm rear axle to keep things stable at the rear. Features: Frame: Nukeproof Dissent 297 Alloy, 200mm Travel, custom triple butted hydro-formed tube set, custom-tuned rear shock configuration, internal cable routing, Enduro bearings, threaded bottom bracket, boost 157mm rear axle spacing, 3D contoured frame protection Fork: RockShox Boxxer Ultimate, Charger 2 RC2, 200mm Travel, 46mm Offset, BOOST 20x110mm, Debonair, Boxxer Red Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom Tune, 250x75mm, Bearing End, Red Coil Spring (S=300LBS/M=350LBS/L=400LBS /XL=450LBS SPRING) Front Wheel: Nukeproof Horizon V2 DH 29", 20x110mm Rear Wheel: Nukeproof Horizon V2 DH 27.5", HG Freehub, 157x12mm Tyres: Front: Michelin DH22 29”x2.4, TLR/ Rear: Michelin DH22 27.5”x2.4, TLR Crankset: SRAM XO1 DH Carbon X-Sync, 165mm, 34T, DUB83mm, Black Chain Device: MRP Mini G4 32-36T ISCG-05 Shifter: SRAM XO1 7-Speed, Red Rear Derailleur: SRAM XO1 DH 7-Speed, Red Chain: SRAM PC-1110 11-Speed Cassette: SRAM PG720 DH 7-Speed, XG795 11-25T Brakes: SRAM Code R, Sintered pads Front Rotor: SRAM Centreline, 220mm Rear Rotor: SRAM Centreline, 200mm Handlebars: Nukeproof Horizon 25mm Rise, Width -S780mm, M780mm, L800mm, XL800mm Stem: Nukeproof Horizon Direct Mount, 45mm, Black Saddle: Nukeproof Seatpost: Nukeproof Neutron, 30.9mm, 300mm, 0 Offset Headset: Nukeproof, 49IITS Grips: Nukeproof Sam Hill Signature Weight: 16.81kg Medium Tubeless Key Information: Dissent 297 Material: Hydroformed 6061 Triple-Butted Aluminium Size: S/M/L/XL Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: Front: 29"; Rear: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm BB: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
Genuine Nukeproof replacement frame spare part.
Genuine Nukeproof replacement frame spare part.
Nukeproof Dissent Mountain Bike Brake Mount KitThis Dissent Brake Mount Kit is for use with the 2020-2022 Nukeproof Dissent frame. Features: Kit Includes: 2x NP-97 (Brake Adaptor Bolt) 2x NP-106 (Brake Adaptor Bolt Washer) 1x NP-89 (Brake Mount Adaptor) 2x NP-98 (1.5mm Brake Adaptor Washer) 2x NP-99 (1mm Brake Adaptor Washer)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent Mountain Bike Cable Guide KitThis Dissent Cable Guide Kit is for use with the 2020-2022 Nukeproof Dissent frame. Features: Kit Includes: 1x NP-70 (Cable Guide Bolt) 2x NP-71 (Metal Cable Guide) 1x NP-93 (Down Tube Cable Guide) 1x NP-96 (Down Tube Cable Guide Bolt) 2x NP-105 (Cable Guide)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent Mountain Bike Hanger KitThis kit includes a replacement gear hanger for the 2020-2022 Nukeproof Dissent frame. Features:Kit Includes: 1x NP-87 Gear HangerBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent Mountain Bike Main Pivot KitThis Dissent Main Pivot Kit is for use with the 2020-2022 Nukeproof Dissent frame. Features: Kit Includes: 1x NP-79 (Main Pivot Axle) 1x NP-80 (Main Pivot Bolt) 2x NP-81 (Main Pivot Washer)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent Mountain Bike Rear Axle KitThis Dissent Rear Axle Kit is for use with the 2020-2022 Nukeproof Dissent frame. Features: Kit Includes: 1x NP-88 (Rear Axle) 1x NP-92 (Axle Compression Washer)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.