This trail-ready full suspension mountain bike (MTB) frame features an ultra-strong monocoque carbon fibre build, which makes it more than capable of handling all the demands associated with all-day epics on the trails. Nukeproof has also kitted out this model with a high-quality Factory Series Fox Float X rear shock that offers excellent smoothness, tuneability and control as you charge across tree roots, rock gardens and debris. Ready for modern trail riding, its 148x12mm Boost rear hub spacing gives it increased stiffness and strength, while its updated geometry with internal cable routing delivers slick handling on the most demanding of terrains. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Full Suspension Carbon Fibre MTB Frame To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, Nukeproof designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 160mm (Comp 150mm) Axle to Crown: 555mm (Comp 545mm) Fork Offset: 46mm Rear Travel: 140mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x55mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 275 Carbon, 140mm Travel, UD woven Carbon Fibre frame Internal cable routing ISCG05 mount Enduro Bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two-position adjustable Flip chip system Shock: Fox Float X, Factory Series, Kashima, 2 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Headset: Nukeproof, 44-56 IITS Weight: 3.6Kgs/7.9lbs (Medium option)
Seasucker Komodo Bike RackDesigned with road racers who drive convertibles and other small sports cars in mind, this solid aluminium bike holder is ideal for when carrying space is at a premium. Coming complete with components which support 9mm QR axles and 12mm thru axles, this is a stylish and innovative way to transport your bike to the starting line. Attaching to your vehicle via four super-strong vacuum cups, the Komodo provides a reliable, damage-free hold to both your bike and car. Features:Material: Solid, machined Aluminium Minimum Size: 18x12" Compatibility: Road bikes with 9mm QR hubs and 12mm thru-axle hubs Buy Seasucker Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Escarpe 29 CRX frame features top-quality T800 carbon fibre front and rear triangles and it is equipped with a Fox Float DPS Factory Series Kashima coated rear shock. Ready to be the backbone of your stylish hardcore all-mountain trail bike, this frame offers outstanding responsiveness, agility, strength and control at a low weight. It also features Vitus' flip-chip adjustable suspension system that enables you to easily fine-tune its suspension performance to suit your riding style. Agile, Efficient and Stable Full Suspension Trail Frame At the core of the Vitus all-mountain and trail range is the Escarpe CRX Mountain Bike Frame. Bringing forward all that was loved from the previous Escarpe platforms, this latest version has undergone the most comprehensive development yet to deliver a ride experience that’s more controlled, efficient, predictable and stable, whatever the terrain. Climb ahead? No problem. Technical descent inbound? You’ve got this. This performance full-carbon frameset is the perfect starting point to build your dream trail and all-mountain bike. To ride faster, to discover that perfect line, to flow effortlessly where before you tiptoed, your bike and body need to speak the same language. Thankfully the Escarpe knows exactly how to read you and the trail. For Trail and All Mountain Riding Whether braking hard, pushing more power or negotiating a twisty descent, your centre of gravity is rarely constant, so key to the whole system is efficiency. To deal with the dynamic nature of trail riding, the Escarpe stays predictable and consistent so that you can stay loose. No white knuckles here. The suspension kinematics have been enhanced compared to the previous platform, further countering the effects of pedal-bob and reducing the harshness of small bumps and trail vibrations that drain your energy and kill speed. Smoother is faster for longer. With an adjustable flip-chip, that can raise the bottom bracket by 6mm and increase the head angle, you can also customise the setup to best suit how and where you ride. Additionally, geometry and performance are optimised throughout the size range, so whether you are S or XL, there’s no compromise on how this bike feels. Key Features: Full T800 frame sheds weight for a truly responsive ride 29" platform balancing speed and efficiency Adjustable flip-chip to fine-tune handling and your preferred feel Modern geometry with adjustable flip-chip, improved suspension kinematics and a smile-inducing ride. Ultra-Smooth Fox Float DPS Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areas Features: Frame: Escarpe full T800 carbon front and rear triangles, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru axle Rear Shock: Fox Float DPS Factory Series, Kashima coating, Grip2 air spring, EVOL, 3 position lever, 205mm x 60mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8"" upper tapered to 1.5"" lower headtube Seat Screw: Vitus, 36.4mm Diameter Wheel Size: 29" Weight: Medium: 3.1kg Suspension Travel: 150mm Front, 140mm Rear Intended Use: Trail / All Mountain
The Mmmbop 1.0 is equipped with a 150m-travel RockShox Yari suspension fork to keep you nimble and in control whatever the weather or riding conditions. A Shimano Deore M7100 1x12-Speed groupset gives a wide-gear range for steep climbs and long-distance rides, and for the steep descents you have exceptionally powerful and low-maintenance SRAM DB8 hydraulic disc brakes. Nukeproof Neutron Wheels and Maxxis Minion Tubeless Ready Tyres This all-terrain hardtail trail bike rolls fast upon Nukeproof Neutron V2 wheels wrapped in Maxxis Minion DHF and DHR II tyres that feature Maxxis' 3C MaxxTerra high-grip compound and tear-resistant EXO+ Tubeless Ready casing. And a Brand-X Ascend dropper seatpost and an aftermarket-quality finishing kit from Nukeproof and Ragley complete the build perfectly. The Mmmbop is here for the fun times. Slack, aggressive and built to hang with any of your full-suspension riding mates. Perfect to ride all day but drop the saddle and the magic happens… A 63.75-degree head angle inspires confidence on the steeps, the 150mm RockShox Yari provides bucketloads of composure, and the taught frame keeps things tracking no matter what. The bike is way more than the sum of its parts, and that’s saying something: the 1.0 sees an upgrade to the 12-speed Deore groupset and SRAM DB8 brakes. The award-winning Brand-X Ascend dropper is a trail essential and Tubeless Ready Nukeproof Neutron V2 wheels are the perfect partner for the range-topping Maxxis 3C EXO+ Minion rubber. So, whether you’re entering the hardtail category at an enduro race, exploring a backcountry epic or just smashing around the local woods, the Mmmbop is ready for anything. Features: Frame: Ragley Mmmbop - Alloy Boost 27.5" Fork: RockShox Yari RC, 150mm Travel, Motion Control, Gloss Black, Maxle:15x110, 1.5 Tapered steerer, 46mm offset Headset: Nukeproof Neutron ZS44/28.6 ZS44/40 Headset with Ragley Top Cap Handlebar: Ragley Alloy Handlebar, Black, 25mm Rise, 31.8mm Clamp (Width - S780mm, M780mm, L800mm, XL800mm) Stem: Ragley 31.8mm clamp, 50mm length, +3° rise Grips: Ragley A20 Compound Front Wheel: Nukeproof Neutron V2, 15mm Boost Front Hub, 27.5" 32h rim Rear Wheel: Nukeproof Neutron V2, 148mm x 12mm Rear Hub, 36 points of engagement, HG Freehub, Sealed bearings, 27.5" 32h rim Thru Axle: Length: 175mm, Pitch: M12*1.5, Thread length: 18mm Front Tyre: Maxxis 27.5X2.50" WT Minion DHF 3C MaxxTerra/EXO+/TR 120TPI Rear Tyre: Maxxis 27.5X2.40" WT Minion DHR II 3C MaxxTerra/EXO+/TR 120TPI Rim Tape and Valves: 32mm Tubeless Tape and Tubeless tape supplied Chain: Shimano M6100 12 Speed with Quick Link Crankset: Race Face Ride, 170MM, 30T Bottom Bracket: Nukeproof 73mm BSA Front Brake: SRAM DB8, 200mm Rotor Rear Brake: SRAM DB8, 180mm Rotor Rear Derailleur: Shimano Deore RD-M7100 SGS 12-Speed, SHADOW PLUS DESIGN Rear Shifter: Shimano Deore M7100, 12-Speed RAPIDFIRE, Direct attach to brake using I-Spec EV Drivetrain Cables: Shimano Cassette: Shimano Deore M6100-12 10-12-14-16-18-21-24-28-33-39-45-51T Saddle: Ragley Tracker Saddle Seat Post: Brand-X Ascend Internal Route Post - 31.6mm, SM - 125mm Drop, MD - 150mm Drop, LG/XL - 170mm Drop Seat Clamp: 34.9mm Alloy Also included: Ragley Chainstay protector 5 Year Warranty and lifetime crash replacement ISO 4210 Certified Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
Featuring an ultra-strong T700/800 monocoque carbon fibre construction, this mountain bike (MTB) frame offers fantastic stiffness and durability without weighing down your ride with unnecessary excess grams. Nukeproof has also equipped it with a Factory Series Fox Float X rear shock for smooth and consistent rear end suspension performance, as you charge across rock gardens, tree roots and debris. Another highlight is its updated geometry with internal cable routing, which allows you to benefit from trail-ready handling and control with a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this is a perfect choice of upgrade for completing your full suspension MTB bike build. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Full Suspension Carbon MTB Frame To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre frame Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two-position adjustable Flip chip system Shock: Fox Float X, Factory Series, Kashima, 3 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Headset: Nukeproof, 44-56 IITS Weight: 3.5Kgs/7.7lbs (Medium option)
Here’s proof you don’t need tons of suspension travel to tackle challenging trails. Equipped with an all-new longer lower and rowdier chassis we’ve added 27.5x2.6 wheels and tires to the Fuse Sport 27.5 to create a bike that lets you hit rocks and roots at speed with absolute control. ROWDY BY DESIGN The Fuse is loaded with smart touches. The wide-diameter down tube boosts stiffness. The low-slung top tube improves maneuverabilty on tight trails. And while this Fuse’s 27.5x2.6 tires give it ample traction and stability it’s also compatible with 29er wheels and tires. PERFECTLY DIALED Fail to nail the geometry and advanced designs will still amount to nothing on the trail. Fuse gets it right. The long reach gives you even weight distribution. The slack head angle lends confidence on sketchy descents. The steep seat angle makes quick work of steep climbs. 130-millimeters of suspension courtesy of a RockShox Judy Silver TK fork. Highlights include SRAM Level hydraulic disc brakes and TranzX dropper post. Wide-range SRAM SX 1X drivetrain provides crisp shifts and gearing to tackle any hill. Fuse Sport 27.5 Technical Specifications FRAMESET Frame Specialized A1 Premium Aluminum 148mm thru-axle tapered head tube internal cable routing Seat Binder Alloy 38.6mm Suspension Fork RockShox Judy Silver TK air spring 42mm offset 130mm of travel COCKPIT Stem Stout 3D-forged alloy 31.8mm 6-degree rise Handlebars Stout Riser double-butted alloy 9-degree backsweep 5-degree upsweep 15mm rise 750mm / 780mm width 31.8mm Tape Specialized Trail Grips Saddle Body Geometry Bridge Saddle steel rails SeatPost TranzX Dropper 30.9mm S: 100mm M-XL: 120mm BRAKES Front Brake SRAM Level hydraulic disc 180/160mm Rear Brake SRAM Level hydraulic disc 160mm DRIVETRAIN Rear Derailleur SRAM SX Eagle 12-speed Shift Levers SRAM SX Eagle trigger 12-speed Cassette SRAM PG-1210 Eagle 11-50t Chain SRAM SX Eagle 12-speed Crankset SRAM SX Eagle 12-speed Boost Powespline 32T Bottom Bracket SRAM Powerspline WHEELS Rims Alloy disc only double-wall 29mm internal width 28h tubeless compatible Front Hub Alloy sealed cartridge bearings 15x110mm thru-axle 28h Rear Hub Alloy sealed cartridge bearings 12x148mm thru-axle 28h Front Tire Eliminator GRID TRAIL casing GRIPTON® T7 compound 2Bliss Ready 27.5x2.6' Rear Tire Eliminator GRID TRAIL casing GRIPTON® T7 compound 2Bliss Ready 27.5x2.6' Inner Tubes Presta 40mm valve WHEELS & TIRES Spokes Stainless 14g * Specifications are subject to change without notice
The Big Wig is equipped with RockShox Revelation RC forks, a Shimano Deore M6100 12-Speed groupset and hydraulic disc brakes. Designed for those who like to push the limits, the Big Wig rolls upon 29" (29er) wheels and features a custom triple-butted 4130 Chromoly (CrMo) tubing frame that is agile, durable and lightweight for singletrack trail riding and all-mountain adventures. The Big Wig 29er is a commanding bike; the big-wheeled counterpart to the infamous Blue Pig. The 29” wheels give it all-out speed like no other, with tried and tested geometry putting you in complete control between the choppiest of corners. The Big Wig is at home being piloted at an enduro race, taking on a multi-day adventure or just smashing laps of your favourite trail centre. Like so many of our bikes, it’s a versatile tool to be ridden almost anywhere, by anyone. The Big Wig frameset features ISCG 05 tabs, a 44mm head tube, internal dropper routing and a 148x12mm boost rear end. Our steel frames are engineered from custom triple-butted 4130 Chromoly tubing for a frame that is stiff but lively and comfortable. Spec is the usual blend of performance and reliability to fit the no-nonsense Ragley ethos. Looking for a true do-it-all bike to deliver the good times well into your riding future? The Big Wig will take you there, at speed... Features: Frame: Ragley Big Wig 29" 4130 Chromoly (CrMo) Fork: RockShox Revelation RC 140mm, 29", 15x110 Boost, Stealth Maxle, 51mm Offset, 1.5" Tapered Steerer Headset: Nukeproof ZS44/28.6 EX44/40 with Ragley top cap Handlebar: Ragley Alloy Handlebar, Black, 25mm Rise, 31.8mm Clamp (Width - M780mm, L800mm, XL800mm) Stem: Ragley Stubbing V2 50mm BLACK, 31.8mm clamp, Black Grips: Ragley A20 Compound Front Wheel: Nukeproof Neutron V2 29" 32h 15mm x 100mm Boost Rear Wheel: Nukeproof Neutron V2 29" 32h 148mm x 12mm Boost - Microspline, 36 points of engagement Thru Axle: Length: 175mm, Pitch: M12*1.5, Thread length: 18mm Front Tyre: Maxxis 29x2.5" WT MINION DHF 3C MaxxTerra/EXO+/TR 120tpi Rear Tyre: Maxxis 29x 2.4" WT MINION DHR II 3C MaxxTerra/EXO+/TR 120tpi Rim Tape and Valves: Nukeproof 33mm Tubeless Tape and Nukeproof Horizon Tubeless Valve Supplied Chain: Shimano Deore CN-M6100 - 12-Speed Crankset: Race Face Ride, 170MM, 30T Bottom Bracket: Nukeproof - 73mm BSA Front Brake: SRAM DB8, 200mm Rotor Rear Brake: SRAM DB8, 180mm Rotor Rear Derailleur: Shimano M7100 SLX SGS 12-Speed, Shadow Plus Rear Shifter: Shimano M7100, SLX 12-Speed, Direct attachment to brake lever using iSpec EV Drivetrain Cables: Shimano Cassette: Shimano Deore M6100-12, 10-12-14-16-18-21-24-28-33-39-45-51T Saddle: Ragley Tracker Saddle Seat Post: Brand-X Ascend Internal Route Post - 31.6mm, MD - 150mm Drop, LG/XL - 170mm Drop Seat Clamp: Ragley, 34.9mm, Alloy Also included: Ragley Chainstay protector 5 Year Warranty and lifetime crash replacement ISO 4210 Certified Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
Level UpWith beautifully crafted frames, progressive geometry and seriously dirt-ready components, Trail hardtails are built to take your riding to the next level, from your first time off-road to your next big adventure.Key Features:Perfectly Framed Light and lively, stiff and snappy. The Trail frames showcase our decades of expertise in aluminum craftsmanship. Trail 5 thru 8: New frame - SmartForm C3 Alloy, 1-1/8' headtube, standard QR spacing, post mount discConfident Handling Dirt-Tailored Geometry brings both quickness and composure. Short chainstays for agility and traction, a slack head angle for unwavering stability, plus wide bars and a short stem for total control.Real Deal Trail is sweetly priced, but make no mistake — wide range gearing, powerful disc brakes and durable wheels and tyres contribute to big trail readiness. Naming this bike was a no-brainer.SAVE Micro-SuspensionDelivers a smoother, more controlled ride thanks to strategically engineered flex zones built into the frame's rear triangle.Slack and StableA slack 68° head angle creates exceptionally stable handling so that you can charge the descents with confidence.ConnectedAn integrated wheel sensor helps track your activity (like speed, distance and calories burned), registers your bike, reminds you of needed service and more,all through the free Cannondale App. (Trail 1-3 only)Intellimount StemA convenient mount on the stem will securely hold any SP-Connect compatible smartphone case, creating a dashboard display for speed, mileage and more with the Cannondale App. (Trail 1-3 only)
The Kona Wo features a butted aluminium frame and a Shimano Deore 1x11-Speed groupset with an 11-51t cassette and hydraulic disc brakes. It also rolls upon Sun Ringle Mulefut 80 Tubeless Ready rims wrapped in huge-volume 4.8" Schwalbe Jumbo Jim all-terrain tyres. Shimano Deore 11-Speed Groupset with Hydraulic Disc Brakes The Wo has been a staple in Kona's fat bike line-up for a few years now. Its simple, dependable design has made it a favourite for fat bike aficionados everywhere. Running a wide-range 11-speed drivetrain, durable cranks, and big 4.8” tyres on tubeless-ready rims, the Wo gets you where you need to go with ease. Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
Get your daily dose of singletrack. With a lightweight frame, 130mm suspension fork and 27.5 wheels with high-volume tires, this hardtail offers loads of traction, speed and fun on the trail.Trail tuned designBalanced geometry with a 75-degree seat tube angle puts the rider in a powerful pedalling position on climbs, while a slacker 66-degree head angle boosts confidence and control on technical descents.Responsive handlingLightweight ALUXX SL aluminium hardtail frame offers agile acceleration and manoeuvrability to help riders climb, corner and hammer the flats with efficiency and speed.Smooth controlGiant Crest 34 suspension fork with 130mm of travel absorbs roots, rocks and ruts. Grippy, high-volume tires boost traction on rugged terrain. And a dropper seatpost with handlebar remote lets you adjust saddle height on the fly for confident positioning on changing terrain.
Modern mountain bike trails are fun, flowy and challenging. this full-suspension 29er gets you in sync with the terrain, so you can ride with more confidence and have more fun.KEY PERFORMANCE FACTORSAttainable trail performanceHandcrafted with lightweight, stiff and durable ALUXX aluminum, it’s the perfect entry to full-suspension performance.Smooth suspensionFlexPoint Suspension technology helps you tackle challenging terrain and improve your trail riding capabilities.29er confidence and controlLarger diameter wheels roll over rugged terrain with balance and stability, giving you the momentum to tackle technical climbs and the confidence to fly on singletrack descents.
GET YOUR DAILY DOSE OF SINGLETRACK. WITH A LIGHTWEIGHT FRAME 130MM SUSPENSION FORK AND 27.5 WHEELS WITH HIGH-VOLUME TYRES THIS HARDTAIL OFFERS LOADS OF TRACTION SPEED AND FUN ON THE TRAIL. Trail tuned design Balanced geometry with a 75-degree seat tube angle puts the rider in a powerful pedalling position on climbs while a slacker 66-degree head angle boosts confidence and control on technical descents. Responsive handling Lightweight ALUXX SL aluminium hardtail frame offers agile acceleration and manoeuvrability to help riders climb corner and hammer the flats with efficiency and speed. Smooth control Giant Crest 34 suspension fork with 130mm of travel absorbs roots rocks and ruts. Grippy high-volume tires boost traction on rugged terrain. And a dropper seatpost with handlebar remote lets you adjust saddle height on the fly for confident positioning on changing terrain. Sizes S M L XL Colours Knight Shield Frame ALUXX SL-Grade Aluminum Fork Giant Crest 34 SL RCL 130mm 44mm offset Boost 15x110 Shock N/A Handlebar Giant Contact TR35 780x35mm Grips Giant Sole-O Stem Giant Contact SL 35 S:40mm M:40mm L:50mm XL:50mm Seatpost Giant Contact Switch dropper remote S: 125mm travel / 30.9 x 395mm M: 125mm travel / 30.9 x 395mm L: 150mm travel / 30.9 x 440mm XL: 170mm travel / 30.9 x 450mm Saddle Giant Romero Pedals N/A Shifters SRAM SX Eagle 1x12 Front Derailleur N/A Rear Derailleur SRAM NX Eagle Brakes Shimano BR-MT420/410 hydraulic Shimano RT-26 rotors [F]180mm[R]180mm Brake Levers Shimano BR-MT401 Cassette SRAM SX Eagle 11x50 Chain SRAM SX Eagle Crankset SRAM SX Eagle 30t S:165mm M:170mm L:170mm XL:170mm Bottom Bracket SRAM DUB press fit Rims Giant AM 27.5 tubeless ready sleeve-joint rim 30mm inner width Hubs Alloy sealed bearing Spokes Stainless steel Tyres Maxxis Ardent Race 27.5x2.6 folding TR Extras Factory tubeless set up 2.6' max tyre size 32t max chainring size Weight The most accurate way to determine any bike’s weight is to have your local dealer weigh it for you. Many brands strive to list the lowest possible weight but in reality weight can vary based on size finish hardware and accessories. All our bikes are designed for best-in-class weight and ride quality.