SRAM Level Mountain Bike Disc Brake and RotorSRAM's Level MTB Disc Brake + Rotor may fall into the more budget range of brakes, but it still manages to pack a punch, as it features most of the same technologies as their higher end Downhill/Enduro "Guide" brakes. Ideal for Cross-Country and trail use, it benefits from technology such as an expandable bladder and TPC Plus. Features: Body Material: Aluminium Lever Material: Aluminium - Stamped Caliper Design: 2-piston monoblock caliper Recommended Rotor type: 1-piece G2 CleanSweep Pad: Steel-backed organic Fluid: DOT 5.1 Mount: Ambidextrous Adjustment: Tool-free Reach Adjust, Contact Point Adjust, Banjo Adjust Special Features: Contact Point Adjust, Piggyback Reservoir, DOT 5.1 fluid Technology Highlight(s): TPC Plus, DirectLink Pad/Holder: Top-loading Intended Use: XC/Trail Tri-Align Caliper Positioning System: No Tool-Free Pad Replacement: Yes Stainless Hardware: Yes Weight: 430gTechnologies:DirectLinkSRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control.PiggyBack Reservoir:The brake fluid reservoir on SRAM’s latest lever design is optimised for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement-so you can switch your levers on the handlebar and run them moto style without hassle.Expandable Bladder SRAM’s new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistency. TPC Plus (Timing Port Closure):A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port to pressurise the system. SRAM’s new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.DOT 5.1Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Force22 Road Disc BrakeThe Force 22 Road Disc Brake combines the outstanding performance of SRAM’s 11-Speed mechanical gearing with the power and reliability of hydraulic disc brakes. The force 22 lever features a revised design to offer increased braking force with less rider effort.Fade-free BrakingAs these levers use high-quality DOT 5.1 brake fluid, you can head into the mountains with even more confidence and you’ll be able to take on those long descents without worrying about your brakes.Advanced ShiftingSome of SRAM's best shifting technologies have been packed into the Force 22 lever, including Reach Adjust, DoubleTap, and ZeroLoss. This means that this lever offers you a personalised setup, minimal user effort and lightning quick shifts.Features:Material: Carbon Fibre (lever) Forged Aluminum (disc caliper and shift lever) Stainless Steel (hardware) Optimised stopping power and modulation for road use 18mm pistons Road specific caliper and piston ratio Fully sealed system = no contamination Finish: Ice grey anodised Mounting: Flat mount no offset Recommended Rotor: Centerline (140 and 160mm, not included) Pad Type: Steel-backed organic Fluid: DOT 5.1 Compatibility: SRAM RED 22, Force 22, and Rival 22 Speed: 11-Speed Shift Inner Cable Length: 2200mm Shift Outer Cable Length: 2050mm Hose Length: 1800mm Weight: 471g per wheel (lever, caliper, hose and 160mm centerline rotor)Technologies: DOT 5.1: Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that in their brake systems, DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions. DoubleTap: DoubleTap makes changing gears easier and faster, eliminating the cumbersome and awkward engagement associated with two-lever systems. DoubleTap handles up and downshifts in one short, sweeping motion, with minimal effort and maximum comfort no matter where you are on the bars. With short, rapid taps you will shift up through the shifting range and downshifting comes via a longer sweep of the lever (in the same inward direction you upshift, but to an ergonomically maximised 15° angle) Reach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. ZeroLoss: ZeroLoss simply means, well, zero loss—when you push on the lever, for an upshift or down shift, the cable is engaged instantly—zero loss of movement. There is no middle ground where you're waiting for the shift to come. Gear changes are instant and precise Connectamajig™: The Connectamajig is the coupling hose that makes the initial set-up of SRAM road hydraulic brake systems easy, fast and convenient for the factory, craft builder, or dealer. The intimidation of hydraulics is gone with a push and a twist, it's just that easy. Connectamajig is available to bike manufacturers and works for SRAM’s RED 22 and S-700 hydro systemsBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM S-900 Direct Mount Road Brake CaliperSRAM's S-900 has a design that delivers great power and superior feel. It delivers more efficient transfer of energy from lever to rim, making for solid modulation and a snappy return. It offers clearance for up to 28c tyes and is compatible with all non-hydraulic SRAM road levers, including SRAM RED eTap.Features:Direct mountReach: StandardCompatible with non-HRD SRAM road shift-brake and brake leversSold individuallyFront and rear compatible - fork and seat stay mount onlySolid feel, power, and modulation with a snappy returnWider clearance for modern wheelsetsBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM S-900 Direct Mount Road Brake CaliperSRAM's S-900 has a design that delivers great power and superior feel. It delivers more efficient transfer of energy from lever to rim, making for solid modulation and a snappy return. It offers clearance for up to 28c tyes and is compatible with all non-hydraulic SRAM road levers, including SRAM RED eTap.Features:Direct mountReach: StandardCompatible with non-HRD SRAM road shift-brake and brake leversSold individuallyFront and rear compatible - fork and seat stay mount onlySolid feel, power, and modulation with a snappy returnWider clearance for modern wheelsetsBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Guide R Disc Brakes (with Sintered Pads)This high-quality 4-piston caliper disc brake gives you smooth, one-finger control all across the mountain. Packed with some of the finest features and technologies such as Reach Adjust, you can customise its reach exactly how you want it. Comfortable and easy to use, this powerful model gives you flawless performance on every single ride. Additionally, this version also includes the World Championship-winning S4 caliper with Bleeding Edge and Heat Shield technologies for phenomenal braking performance. Please Note: A handlebar clamp is not included with this model and will need to be purchased separately.Features: Material: Aluminium Caliper Design: 4-piston, dual diameter S4 caliper Rotor: Centreline Pad: Sintered Adjustment: Tool-free reach adjust, banjo adjust Use: MTB System: Open Pad holder: Top-loading Weight: 390gTechnologies: Reach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. Bleeding Edge: Bleeding Edge technology makes bleeding brakes quick and simple. An updated fluid path and bleed porting make it easier to push fluid through the caliper. A dedicated bleed adapter plugs into the bleed port and seals the system to minimize air contamination and fluid loss. Heat Shield: The stainless steel heat shields breaks the thermal connection between the pad and caliper body, reducing caliper fluid temperature by about 20C even in the most extreme testing conditions.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Level TLM Mountain Bike Disc BrakeThis championship-winning disc brake is ready to take all the abuse you want to give it out on the trails. It puts proven SRAM braking performance at your fingertips thanks to its sleek, lightweight design that's specially optimised for XC and light trail use. Additionally, it delivers power and modulation via its robust alloy lever blade, DirectLink actuation, DOT 5.1 fluid and a two-piston monoblock caliper. Furthermore, this superb design provides you with superior heat management for consistent, fade-free braking ride after ride.Features: Lever Material: Forged Aluminium Hardware Material: Stainless Steel Use: MTB, XC Caliper: 2-piston Fluid: DOT 5.1 Adjustment: Tooled reach adjust System: Open system Pad/Holder: Top loadingTechnologies: Bleeding Edge: Bleeding Edge technology makes bleeding brakes quick and simple. An updated fluid path and bleed porting make it easier to push fluid through the caliper. A dedicated bleed adapter plugs into the bleed port and seals the system to minimize air contamination and fluid loss. DirectLink: SRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake It offers a no-nonsense solution to give you precise control. DOT 5.1: Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. We found that in our systems DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions. Expandable Bladder: SRAM's new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved back-pressure relief, which produces dependable braking power and consistency. Heat Shield: The stainless steel heat shields breaks the thermal connection between the pad and caliper body, reducing caliper fluid temperature by about 20C even in the most extreme testing conditions. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM triggers, and various RockShox controls, all with one tidy, light, clamp--a dream come true for handlebar component footprint conservationists the world over. Available in two versions: Matchmaker X integrates the RockShoxXLoc and is compatible with XX and X0 brakes. Standard Matchmakeris also available and works with any split-clamp design and RockShox PushLoc. PiggyBack Reservoir: The brake fluid reservoir on SRAM's latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement—so you can switch your levers on the handlebar and run them moto without hassle. Timing Port Closure: A hydraulic brake's timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM's new timing port closure system features durable seals and an ultra-smooth cylinder bore finish, producing dependable braking power and consistency.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Level TLM Mountain Bike Disc BrakeThis championship-winning disc brake is ready to take all the abuse you want to give it out on the trails. It puts proven SRAM braking performance at your fingertips thanks to its sleek, lightweight design that's specially optimised for XC and light trail use. Additionally, it delivers power and modulation via its robust alloy lever blade, DirectLink actuation, DOT 5.1 fluid and a two-piston monoblock caliper. Furthermore, this superb design provides you with superior heat management for consistent, fade-free braking ride after ride.Features: Lever Material: Forged Aluminium Hardware Material: Stainless Steel Use: MTB, XC Caliper: 2-piston Fluid: DOT 5.1 Adjustment: Tooled reach adjust System: Open system Pad/Holder: Top loadingTechnologies: Bleeding Edge: Bleeding Edge technology makes bleeding brakes quick and simple. An updated fluid path and bleed porting make it easier to push fluid through the caliper. A dedicated bleed adapter plugs into the bleed port and seals the system to minimize air contamination and fluid loss. DirectLink: SRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake It offers a no-nonsense solution to give you precise control. DOT 5.1: Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. We found that in our systems DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions. Expandable Bladder: SRAM's new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved back-pressure relief, which produces dependable braking power and consistency. Heat Shield: The stainless steel heat shields breaks the thermal connection between the pad and caliper body, reducing caliper fluid temperature by about 20C even in the most extreme testing conditions. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM triggers, and various RockShox controls, all with one tidy, light, clamp--a dream come true for handlebar component footprint conservationists the world over. Available in two versions: Matchmaker X integrates the RockShoxXLoc and is compatible with XX and X0 brakes. Standard Matchmakeris also available and works with any split-clamp design and RockShox PushLoc. PiggyBack Reservoir: The brake fluid reservoir on SRAM's latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement—so you can switch your levers on the handlebar and run them moto without hassle. Timing Port Closure: A hydraulic brake's timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM's new timing port closure system features durable seals and an ultra-smooth cylinder bore finish, producing dependable braking power and consistency.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM NX Eagle 12 Speed Mountain Bike GroupsetThe NX Eagle 12 Speed Mountain Bike Groupset from SRAM offers all the top technologies of SRAM's XX1 and X01 drivetrains at a price that won't break the bank. This groupset includes SRAM's well-known bottom bracket Dynamic Unifying Bottom Bracket (DUB) system, which improves performance between the crank, spindle and bottom bracket for a smoother ride whatever the terrain. Features:Chainset:The NX Eagle DUB chainset is engineered to deliver Eagle 12 speed performance and styling that everyone can enjoy. In addition to the excellent chain retention that’s provided by the X-SYNC™2 chainrings, this chainset provides outstanding power transfer and durability due to the highly advanced DUB bottom bracket system.Chainset Features: Material: Aluminium (chainring), 7000 series Aluminium (crank arm) Bottom Bracket Interface: SRAM DUB (bottom bracket not included, available separately) Chainline: 49mm Bolts: Direct mount Recommended Chain: SRAM Eagle Compatibility: All Eagle drivetrains Weight: 705g (175mm, 32T ring)Shifter:Despite the NX model falling under the “entry-level” category, SRAM has still managed to pack in some of its best technologies. These include ZeroLoss™ and X-Actuation™ technologies, which combine to offer instant shifts and sharp shifting across the full cassette range.Shifter Features: Material: aluminium/Plastic, Stainless Steel hardware Compatibility: All Eagle drivetrains Matchmaker compatible for dropper remote and brake lever integration Weight: 112gRear Derailleur:As seen on the top-of-the-line XX1 and X01 models, the NX Eagle rear derailleur also adopts SRAM’s 1x specific X-Horizon™ cage design. This carefully engineered mechanism ensures capacity for the huge 11-50T cassette and compliments the smooth Performance of an Eagle 12 speed system. This derailleur also boasts SRAM’s Type-3 Roller Bearing Clutch™ for unrivalled durability and quiet consistent performance.Rear Derailleur Features: Material: Aluminium (cage), Steel (spring, pulley), Stainless Steel (hardware) Max Tooth: 50T Compatibility: All Eagle drivetrains Weight: 339gChainAt the core of all Eagle drivetrains, the 12 speed Eagle chain is designed and manufactured with SRAM’s Eagle™ architecture. This ensures perfect compatibility with all of the other components in any Eagle ecosystem for highly efficient, smooth and quiet shifting that you can take for granted each and every time you hit the trails.Chain Features: Material: Steel Rivet Type: Solid pin Compatibility: All Eagle drivetrains Weight: 278g (126 links)CassetteSRAM designed its NX Eagle cassette to provide riders with the option of upgrading to 12 speed, but without the need for a hub or wheel upgrade. Ready to fit straight on to standard “splined-drive” freehubs and offering a massive 11-50T range, this cassette gives you the climbing range you need to attack the climbs and the smooth performance to get the most out of your other Eagle components. This cassette is also designed to be durable enough for the extra demands and abuse of E-MTB use.Cassette Features: Material: 8 lightweight, stamped steel cogs and 4 high-strength steel cogs pinned onto an aluminium spider Recommended Chain: Eagle chain only Compatibility: All Eagle drivetrains Weight: 615gTechnologies: X-Sync 2: X-Sync 2 Eagle is the next evolution of SRAM X-Sync technology. The aggressive tooth design provides better chain retention for a smoother, more efficient pedal feel. With a focus on long wear-life, the X-Sync Eagle design reduces friction and the accumulation of mud, grit and grime. DUB™ Technology: The relationship between bottom bracket spindle and bearing is the core of DUB™ technology. It’s where stiffness meets durability. SRAM took it a step beyond conventional thinking and made everything simpler, by better integrating the relationship between chainring, crank, spindle and bottom bracket. It’s this clear system approach that equals better drivetrain performance. Zero Loss: The gear cable is engaged instantly with zero loss of movement when you press a shift trigger, every gear change is instant and precise. Matchmaker X Integrated: You can put everything from your XLoc suspension lockout, your SRAM shifters and brake levers as well as your Reverb XLoc remote, all on two clamps. It's the ideal way to put everything within easy reach and tidies up your bike's cockpit. Cage Lock: With Cage Lock technology in the rear derailleur, wheel removal and installation, as well as chain installation, becomes faster and simpler. Just push the cage forward to create slack and lock it into place. Roller Bearing Clutch: The Roller Bearing Clutch delivers maximum drivetrain stability even through the most punishing terrain. This stability benefits the drivetrain dramatically, as derailleur bounce and chain slap are eliminated without sacrificing precision. X-Actuation: Developed specifically for SRAM 1x drivetrains, X-Actuation keeps shifting sharp and consistent across the entire cassette. This makes gears easy to index and provides exceptional performance. X-Horizon: The X-Horizon ‘straight parallelogram' design limits all movement on the horizontal axis, which makes ghost shifting impossible while also reducing shift force. The large upper pulley offset design maintains a constant chain gap across all gears and guarantees faster and more exact shifting. Flow Link: Ultra-smooth chain inner-plates are completely devoid of square edges, resulting in a chain that engages the cassette and chainring with far less friction, for quieter performance and better wear life. The design allows a narrower overall profile and a flatter outer-plate that can withstand greater shifting angles. This means more consistent chain riveting and enhanced overall strength is achieved. PowerLock: SRAM chain engineers developed PowerLock as a tool-free and consistent way to connect mountain bike chains. While PowerLock does not require special tools for installation, the especially tight tolerances of 10, 11 and 12-Speed drivetrains mandate that each PowerLock is good for a one-time application only. X-Glide 2: This optimised cassette technology, which has been custom designed for the Eagle drivetrain is the next generation of X-Glide shifting. It provides quick, precise, power-on shifting performance throughout the gear range, and increases chain retention on larger cogs.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Racing GripsGenuine SRAM racing grips.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Racing GripsGenuine SRAM racing grips.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM X-Sync 2 Eagle Direct Mount ChainringCompatible with both SRAM Eagle 12-speed and its 11-speed drivetrains, this X-Sync 2 Direct Mount Chainring delivers excellent toughness and chain retention as you attack the trails. It pairs up with all of SRAM’s direct mount cranksets for a simple installation process, so you spend less time tinkering in your workshop and more time riding.SRAM’s engineers subjected every size of chainring to untold environmental and mechanical tortures, abuse and neglect, in both lab and real-world settings, to come up with a chainring that would augment the Eagle drivetrain's performance in all conditions. The longer, positive-rake tooth shape on this mountain bike (MTB) chainring has been designed to work perfectly with the Eagle chain hold the chain better and to improve overall pedalling efficiency, while decreasing friction, noise and wear.Features: Material: Forged and machined aluminium Finish: Anodised Speed: SRAM Eagle 12-Speed or SRAM 11-speed Compatibility: SRAM Eagle 12-Speed or SRAM 11-speed drivetrains Mount Type: Direct mount Crankset Compatibility: SRAM direct mount cranksets only Offset: 6mm Chainline: 49mm X-SYNC 2-chainring design increases chain retention, wear life and reduces friction and noise Designed for use with Eagle chainTechnologies: X-Sync 2: X-SYNC 2 Eagle is the next evolution of SRAM X-SYNC technology. The aggressive teeth design provides better chain retention for a smoother, more efficient pedal feel. With a focus on long wear-life, the X-SYNC Eagle design reduces friction and the accumulation of mud, grit and grime.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM X-Sync Direct Mount Boost MTB Chain RingThis SRAM X-Sync DM Chainring is specifically designed for use on "plus" size mountain bikes with their wider "Boost" type rear hubs and helps to ensure you obtain the perfect chainline for optimum performance. It's equipped with SRAM'S X-SYNC technology, which engages with the chain much quicker than standard chainrings and provides reliable chain retention over all terrains and in all conditions.SRAM 1x has been made even better with the simplicity of the new SRAM X-SYNC Direct Mount chainring. Engineered in Germany, the new Direct Mount rings bring lighter weight and greater simplicity to XX1, X01 and X1-1400 cranksets. SRAM’s Direct Mount rings give riders the perfect opportunity for a serious upgrade.Features: Material: Fully CNC'd Aluminium Recommended Group: XX1 and X01. X1 compatible Weight: 66g (28T), 68g (30T), 71g (32T), 76g (34T)Technologies:X-SYNC: SRAM 1X chainrings provide the highest level of performance and durability. Their tall square teeth edges engage the chain earlier than traditional triangle shaped teeth and their sharp and narrow tooth profile, as well as their rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-Sync chainrings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-Sync rings are an integral part of the SRAM 1X drivetrain.Boost: With revolutionary advancements in bicycle componentry, like SRAM's XX1, X01 and X1 drivetrains, mountain bike designers have been given almost limitless freedom to focus solely on the performance of the bike. Each advancement demands that the entire package works flawlessly. Aggressive Trail and Enduro riders have been increasingly enjoying the benefits of larger wheels, but many still view 27.5" and 29" wheels as a possible weak link. This is why SRAM has developed an open standard with Boost compatible components for SRAM drivetrain, hubs and RockShox forks.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.