The Park Tool LRT-4 is designed and built to remove and install Shimano direct mount chainring lockrings found on XTR 9120, XT 8120, MT900 and other Shimano direct mount systems. Precisely CNC machined from 6061 aluminium for a perfect fit and to prevent marring expensive parts.Machined flat face for optimal lockring engagementFor lockrings with 41mm outside diameter and 16 notches36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque6061 aluminium construction
Is the worktop in your workshop running low on space or do you require to have all the gear in your van when out racing or on weekend trips away to discover new trails Then add the TS25 mounted wheel truing stand to your cycle stand and have everything in one place. Will fit the PCS-1 and PCS-4-1, PCS-4-2, and PCS-4 Repair Stands when used with the adjustable height extension.
With a powder coat finish, the The Park Tool wall mount repair stand is designed to be fitted easily to any post or wall stud, and places the clamp approximately 13 inches from the wall. Note: Mounting bolts not included.
Perfect for facing any thru-axle dropout setup and width, IS Mounts, Post Mounts and low clearance chainstay mounts, the DT-5.2 accurately faces front and rear disc mounts to maintain and improve your braking quality. With telescopic axle adaptors for easy and adaptable use, and including a pair of IS Mount, post and Flat Mount cutters within its robust and convenient carry-case, this is a great bit of kit for any workshop or garage.
Park Tool Disc Brake Mount Facing Set (DT-5.2) Designed for accurate facing of front and rear disc mounts, the Park Tool Disc Brake Mount Facing Set DT-5.2 is a precision tool system that helps to eliminate poor brake performance, noisy braking and premature wear of parts caused by misaligned disc brake mounts.Robust and VersatileSuitable for facing IS Mounts, Post Mounts and low clearance chainstay mounts, the DT-5.2 works with any open or thru-axle dropout setup and width thanks to its telescopic axle adaptors. Complete with a pair of IS Mount and Post and Flat Mount cutters and a solid, compact storage case, the Park Tool Disc Brake Mount Facing Set DT-5.2 is just the job for any workshop or service area.Features: Compatible Mounts: Any IS Mount, Post Mounts, Flat Mounts, Low-Clearance Chainstay Mounts Compatible Axles: Open, Thru-Axle (including Boost 110, Boost 148 and all fat bike axles) Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Deluxe Wall Mount Repair Stand PRS-4W-2Simple to mount on to posts or walls, the PRS-4W-2 Repair Stand benefits from Park Tool’s renowned quality and easy to use design. Once your bike is held in the clamp, this advanced bike work stand has a rotatable design, so you can position the bike at any angle for accessing hard to reach areas. Ready for frame sizes up to 76mm (3”) in diameter and aero shaped frames, the clamping pressure of the quick release clamp can be carefully adjusted to prevent damage to expensive carbon frames and seatposts. Features: Material: Steel with powder coat finish Clamp Type: 100-3D Grips nearly any tube from 23-76mm (7/8" - 3"), including aero tubes Cam-actuated adjustment system for quick entry, adjustment and exit Fully adjustable clamping pressure prevents damage to thin-walled tubes Narrow clamping jaws (7cm / 2.7") designed to clamp securely yet fit into tight areas or on short seat posts Durable replaceable clamp covers (#1960) Wall mount extends 14cm (5-1/2") from mounting surface, centre of clamp sits 33cm (13") from mounting surface when installed Mounting bolts not included Weight Limit: 45kg / 100lbs Wall Mounting Plate Size: 15x6cm (6" x 2.5") Mounting Hole Sizes: 13mm (0.5") in diameter and 100mm (4") apartManufacturer's Part Number: QKPRS4W2 Weight: 4.5kg (10lbs)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool PRS4W - Deluxe wall-mount repair stand with 100-3D clampTop quality wall Mounted Repair Stand
A workshop quality repair stand for mounting onto a wall.Key Features:Uses the same 100-3C heavy duty adjustable clamp as the PRS-2OS1 and PRS-3 OS1 deluxe oversize workshop stands.Heavy duty adjustable linkage clamp fits frame tubes up to 1-5/8inches (41 mm).Designed to be wall mounted>Clamp rotates 360 degrees.Mounts easily to any flat surface.Mounting bolts not included.Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
The Park Tool DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor.Key Features:Use of the DT-5.2 helps ensure proper disc brake setup and performance.Faces any IS Mount, Post Mount or new Shimano.Flat Mount, including low clearance, chainstay mounts.Telescoping axle adapters allow use with any configuration of open or thru axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles).Precision machined parts.Includes two facing cutters--one for IS mounts and one for Post and Flat Mounts.
Key Features: Keep your most commonly used tools close at hand with this clever, multi-function tool holder, The TK-4 was painstakingly designed with pockets and holders for specific tool shapes and sizes as well as some generic storage areas, Available in two versions, the Tool Kaddie rotates for easy access and is moulded from a durable composite material, Specific slots and holders for 3-way hexes, screwdrivers, P Handles, pliers/cutters, Generic slots and holders to hold a wide variety of tools and small parts, Mounting location to directly attach HXH-2P or HXH-2T P-Handle Holders (sold separately), Built in Receiver Port for PTH-1 Paper Towel Holder (sold separately).
Key Features: Introducing the PCS-12.2, a bench-mounted version of our popular PCS-10.2 Deluxe Home Mechanic Repair Stand, Features our world-famous cam-actuated micro adjust clamp design, which securely holds bicycles in place while allowing quick installation and removal, Cam actuated, micro adjustable clamp allows quick entry and exit and fits 1" to 3" (25mmÔÇô76mm) diameter tubes and seat posts of any shape and material, Narrow clamping jaws (2.7"/7cm) fit into tight areas or on short seat posts, 360° infinite clamp rotation allows bike to be placed in optimal position for specific repairs, All steel structure for maximum stiffness and durability, Super strong glass-filled nylon composite fittings and top tube internals enable smooth rotation and secure positioning, Mounts to any flat surface (mounting bolts not included), Weight Limit: The PCS-12.2 Home Mechanic Bench Mount Repair Stand has an 80 lb. (36kg) weight limit, provided the stand is securely mounted with appropriate fasteners to a solid and secure bench surface, The user is responsible for making sure the workbench and the fasteners are capable of handling this amount of weight..
The neat solution for frames without suitable upper rear rack mounting points. Efficient, seatpost clamp gives additional M5 threaded mountings for Rear rack Anodised 6061 Alloy seatclamp, M6 Cr-Mo tightening bolt,Integrated M5 twin rack upper mount points.