The all new DMR Blade chainring is now 12 speed compatible. The DMR Blade chainring is now 10, 11 and 12 speed compatible. The DMR Blade MTB chainring has a Wide/Narrow tooth design for ultimate chain retention and when combined with a clutch mech, no chain device is needed. This DMR chainring is manufactured from stiff 4mm wide 7075-T6 Aluminium maintaining direct power transfer. Superlight: 30T- 63g | 32T- 67g | 34T- 74g | 36T- 85g. Save 100g on your spider, chainring and chainring bolts setup. DMR Blade chainring is compatible with any cranks using the SRAM DM interface. Wide/Narrow tooth design for maximum chain retention. Specification Stiff 4mm wide 7075-T6 Aluminium. This direct mount chainring is compatible with SRAM DM interface. Fits Shimano/KMC/SRAM 10, 11 and 12 speed chains. 6mm offset for standard rings, 3mm offset for Boost.
The all new DMR Blade chainring is now 12 speed compatible. The DMR Blade chainring is now 10, 11 and 12 speed compatible. The DMR Blade MTB chainring has a Wide/Narrow tooth design for ultimate chain retention and when combined with a clutch mech, no chain device is needed. This DMR chainring is manufactured from stiff 4mm wide 7075-T6 Aluminium maintaining direct power transfer. Superlight: 30T- 63g | 32T- 67g | 34T- 74g | 36T- 85g. Save 100g on your spider, chainring and chainring bolts setup. DMR Blade chainring is compatible with any cranks using the SRAM DM interface. Wide/Narrow tooth design for maximum chain retention. Specification Stiff 4mm wide 7075-T6 Aluminium. This direct mount chainring is compatible with SRAM DM interface. Fits Shimano/KMC/SRAM 10, 11 and 12 speed chains. 6mm offset for standard rings, 3mm offset for Boost.
The Wolf Tooth XL Strap and Accessory Mount enables you to carry your kit on your frame instead of in jersey pockets. Rain jacket, tubes, tool roll – all good to go. Constructed from sturdy and reliable materials, this is a remarkable exercise in innovative design.Simply attach the base plate to one of the Wolf Tooth B-Rad mounts – purchased separately – and securely strap items up to 12cm in diameter to your frame. Simple, efficient and durable, the Strap and Accessory Mount are ideally suited to gravel, trail and road adventures.Key Features Lightweight, durable, rust-proof materials Includes the mounting plate, strap and associated ED-coated hardware Extremely grippy and flexible strap with reflective tab and foam pad CompatibilityRequires a B-RAD base to mount to your bike Compatible with any frame that uses standard 64mm spacing bottle cage braze-on Securely straps items 75-120mm in diameter
The RM-L is the classic 2 bottle behind the seat storage system, favoured by triathletes and long distance time trialists. Features: Precision machined and stamped 6061AL construction reduces weight while retaining strength The RM-L features built in mounting angle adjustability and bottle cage angle adjustment Wrap around design enables room for storage along with slots for Velcro strapping in case you want to carry spares or a spare tyre etc Using one of the two mounting options allows this system to fit on virtually any saddle available - including: all ISM Adamo, Cobb, Fizik, Tritone, Specialized Sitero Weight: 228g
Our Hornet 1-bike rack is a small-scale revolution. We call it the “Smallest Bike Rack in the World” because it is. The Hornet is so compact that it fits into an included 9.5”x7”x4” zippered carrying case for easy storage and travel. The Hornet is far and away the most travel-friendly rack on the market, but it works equally well for everyday use. The Hornet is our first “leave-the-front-wheel-on” bike rack. It is designed to mount to the back window of any hatchback, SUV or minivan using two of SeaSucker’s powerful 4.5” vacuum cups (120lb rated pull-strength each) to hold the handlebars and hang a bike weighing not more than 35 lbs from the rear glass. Plastic ladder straps securely hold both road and MTB bars to the vacuum cups. As with all SeaSucker bike racks, the pump-action vacuum cups also allow the user to attach the rack in just seconds, making the Hornet one of the easiest and fastest racks to install. Simply pump the two vacuum cups onto the back windshield, close the ladder straps around the bars and you’re done. And when it comes time to remove it, the Hornet detaches just as quickly and breaks back down into its component parts for storage in its case. The Hornet also comes with a safety strap that loops around the bike’s steerer tube and into a sewn-in cam buckle. The strap’s tail has a built-in plastic peg that, when closed in the hatchback, secures the strap to the car. NOTE: this rack is intended for use on hatch-back style vehicles only, and should not be used on a surface that does not have at least a 45 degree angle from horizontal.
The Stages Dash 2-Bolt Out Front Mount is designed to work with PRO Components Stealth EVO one-piece handlebar and stem. This mount positions Stages Dash in the same manner as the stock Out Front Mount for 31.8mm handlebars, but with a fixed viewing angle. This mount is forged from aluminum and allows Dash to be used in either portrait or landscape orientations. Specifications Material: Aluminum Weight: 32gr View: Allows landscape as well as portrait views Handlebar compatibility: PRO Components Stealth EVO one-piece handlebar and stem Use: Road, Cyclocross
Create your own workshop. A bench mount version of the popular PCS-10 Home Mechanic Repair Stand with a quick adjusting cam-type clamp and durable powder coat finish. Mounts to any flat horizontal surface. Key Features: A bench mount version of their popular PCS-10 Home Mechanic Repair Stand. Features a quick adjusting cam-type clamp that fits tubes up to 76 mm (3 inches) and rotates 360 degrees for easy access to any part of the bike. Clamping pressure is fully adjustable to prevent damage to thin walled tubes. Durable powder coat finish. Mounts to any flat horizontal surface (mounting bolts not included).
Helmet mount for all systems that use the slider mounting clipSystem Compatibility Pro Series HID Series Classic Plus & Seclect Evolution & Digital Evolution HeadTrip & Digital HeadTrip TrailRat & TrailRat Select RoadRat Digital Patrol LED Digital Patrol Pre 2001 systems
The HUSKE (Hub Standards Keep Evolving) is a universal fork mount that handles the most common fork mount standards of today and tomorrow. Interchangeable plugs (sold separately) are available for 9x100mm Quick Release, 12x100mm Thru-Axle, 15mmx100 Thru-Axle, and 15mmx110 Thru-Axle (Boost), with more sizes to come in the near future. Fits all SeaSucker fork-mount racks: Talon, Mini Bomber, Bomber, and Falcon. Interchangeable plugs sold separately
Sometimes the standard 6″ Rear Wheel Strap that’s provided with the Talon, Mini Bomber or Bomber doesn’t fit in the space available on your car, so we offer a more compact version with our smaller 4.5″ SeaSucker vacuum pad. The Compact Rear Wheel Strap does NOT have the cupped rear wheel housing that comes standard with the regular Rear Wheel Strap.
Replacement mounting bracket for TOOO Cycling DVR80 cameras TOOO Cycling mounting bracket for the DVR80 Camera Light Combo is designed to be simple and rugged. It fits to all bicycle seat posts, rear racks or front suspension forks to any bicycle on the market. The inner area is rubberised to prevent sliding on any metal, carbon or fibre bike part where you would mount the DVR80.
Replacement elastic ties for the DVR80 mounting bracket. This handy 4 pack of ties is great value and will get you out riding in case you misplace the originals from the box.