Shimano XT M8000 11 Speed Trigger ShifterThis 11 Speed Trigger Shifter from Shimano features an ergonomically streamlined design that benefits from I-Spec II for horizontal and vertical positioning. Made with mountain bike riding in mind, this durable shifter is ready to tackle the toughest of trails. Features:Part No: SL-M8000-RRear Speed: 11-speedInstance Release: Yes2-Way Release: YesOptical Gear Display: Yes (only available with Bar mount version, not I-spec)Shift Cable Casing: Not includedShift Cable: Low friction shift cableUse: Mountain BikeWeight: 127gPlease Note: All I-Spec type mount shifters do not include the bolt and nut kit. I-Spec B is also not directly compatible with I-Spec A brake levers. For that, you will need the I-Spec B Bolt & Nut.A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Candy 1 Clipless MTB PedalsReady to tear up the toughest trails, the tough and versatile Candy 1 clipless mountain bike pedals make the most of each crank rotation. Their open design sheds mud easily and with four-sided engagement, you can simply stamp your foot down to connect. Plus, the 10-degree release angle gives the ideal amount of float for position changes and easy disengagement. crankbrothers has made them from a light but tough composite that’s combined with stainless steel wings and a Chromoly (CrMo) axle, so they can withstand plenty of abuse and come back for more.Features: Body Material: One-piece CompositeAxle Material: Forged SCM435 high strength Chromoly (CrMo)Axle Size: Standard 9/16" threadSpring Material: 300 series Stainless SteelWing Material: Stamped SteelEnd Cap: SlottedBearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearingCleats: Premium Shimano Pedalling Dynamics (SPD) type Brass cleats with shims includedCleats Included: YesQ-Factor: 52mmRelease Angle: 10°Use: Cross Country (XC), Trail, Cyclocross (CX) and GravelRibbed body for better traction when unclippedFour-sided entry and superior mud sheddingCustomisable float & release anglePremium bearings & double seal systemSnap-on traction pad technology to customise and optimise the shoe/pedal interface (available separately)Alternative cleats available for increased release angle of 15° (sold separately)Warranty: 5 yearsWeight: 294g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Eggbeater 1 Mountain Bike PedalsEngineered to tackle tough mountain bike trails, the Eggbeater 1 Mountain Bike Pedals from crankbrothers features a lightweight, durable stamped steel construction and a long-lasting Chromoly (CrMo) spindle for unrivalled performance.Features: Stamped steel body and inner wing with steel spindle add strength and stability without a weight penalty Low-profile design delivers a more powerful and efficient pedal stroke 6° of knee-saving float with a choice of a 15 or 20° release angle gives you a customized fit for the trail Delrin bushing inner and outer bearings Plastic end cap Brass cleat and mounting hardware included Body Material: Stamped SteelSpindle: Forged CrMo steelBody & Wings: Stamped steelSpring: 300 series stainless steelInner Bearing: BushingOuter Bearing: CartridgeCleats: Premium brass cleats includedRelease Angle: 15 or 20 degreesWeight: 290gBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Eggbeater 1 Mountain Bike PedalsEngineered to tackle tough mountain bike trails, the Eggbeater 1 Mountain Bike Pedals from crankbrothers features a lightweight, durable stamped steel construction and a long-lasting Chromoly (CrMo) spindle for unrivalled performance.Features: Stamped steel body and inner wing with steel spindle add strength and stability without a weight penalty Low-profile design delivers a more powerful and efficient pedal stroke 6° of knee-saving float with a choice of a 15 or 20° release angle gives you a customized fit for the trail Delrin bushing inner and outer bearings Plastic end cap Brass cleat and mounting hardware included Body Material: Stamped SteelSpindle: Forged CrMo steelBody & Wings: Stamped steelSpring: 300 series stainless steelInner Bearing: BushingOuter Bearing: CartridgeCleats: Premium brass cleats includedRelease Angle: 15 or 20 degreesWeight: 290gBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank SPIKE 25-30 DM Mountain Bike StemThe Spank Spike 25-30 DM Stem is ideal for today's downhill frames, which have become both longer, shorter and in some cases adjustable. Its super-short reach is a first in the MTB world, and Spank has achieved this by moving the lockdown hardware to within the bar clamp. It offers you reach and rise adjustment to help you find your preferred stance and balancing point.Strong and Lightweight Downhill StemConstructed using 2D forged alloy for extra strength and CNC machined to bring the weight down to only 130g, the Spike 25-30 DM Stem is designed to take a beating without weighing you down. It offers outstanding resistance to movement on impacts and with its chamfered bar clamp zones, stress points on your bars are reduced, extending their fatigue life.Features: Material: 2D forged MGR Alloy, CNC weight optimised Finish: Shot peen anodised, CNC/laser logos Length: 25-30mm (adjustable) Rise: 28-33mm (adjustable) Diameter: 31.8mm Key Technologies: MGR, chamfered bar clamp, adjustable length/rise, "Snap Fit" sealed top cap Discipline: Downhill, Freeride Weight: 130gTechnologies:Micro Grain Refinement Processed Alloys: Processes such as extrusion, forging and tube drawing can increase the strength of alloy materials by reducing the grain size. Spank uses state of the art proprietary metal forming methods which further improve grain size consistency and orientation, and significantly reduce grain size beyond that of its competitors. No other stems, bars or rims are subjected to the number of drawing steps or level of refinement as those offered by Spank. This leads to greater ultimate strength, toughness, and ductility ... meaning confidence, comfort and safety.Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Level Mountain Bike Disc Brake and RotorSRAM's Level MTB Disc Brake + Rotor may fall into the more budget range of brakes, but it still manages to pack a punch, as it features most of the same technologies as their higher end Downhill/Enduro "Guide" brakes. Ideal for Cross-Country and trail use, it benefits from technology such as an expandable bladder and TPC Plus. Features: Body Material: Aluminium Lever Material: Aluminium - Stamped Caliper Design: 2-piston monoblock caliper Recommended Rotor type: 1-piece G2 CleanSweep Pad: Steel-backed organic Fluid: DOT 5.1 Mount: Ambidextrous Adjustment: Tool-free Reach Adjust, Contact Point Adjust, Banjo Adjust Special Features: Contact Point Adjust, Piggyback Reservoir, DOT 5.1 fluid Technology Highlight(s): TPC Plus, DirectLink Pad/Holder: Top-loading Intended Use: XC/Trail Tri-Align Caliper Positioning System: No Tool-Free Pad Replacement: Yes Stainless Hardware: Yes Weight: 430gTechnologies:DirectLinkSRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control.PiggyBack Reservoir:The brake fluid reservoir on SRAM’s latest lever design is optimised for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement-so you can switch your levers on the handlebar and run them moto style without hassle.Expandable Bladder SRAM’s new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistency. TPC Plus (Timing Port Closure):A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port to pressurise the system. SRAM’s new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.DOT 5.1Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Level Mountain Bike Disc Brake and RotorSRAM's Level MTB Disc Brake + Rotor may fall into the more budget range of brakes, but it still manages to pack a punch, as it features most of the same technologies as their higher end Downhill/Enduro "Guide" brakes. Ideal for Cross-Country and trail use, it benefits from technology such as an expandable bladder and TPC Plus. Features: Body Material: Aluminium Lever Material: Aluminium - Stamped Caliper Design: 2-piston monoblock caliper Recommended Rotor type: 1-piece G2 CleanSweep Pad: Steel-backed organic Fluid: DOT 5.1 Mount: Ambidextrous Adjustment: Tool-free Reach Adjust, Contact Point Adjust, Banjo Adjust Special Features: Contact Point Adjust, Piggyback Reservoir, DOT 5.1 fluid Technology Highlight(s): TPC Plus, DirectLink Pad/Holder: Top-loading Intended Use: XC/Trail Tri-Align Caliper Positioning System: No Tool-Free Pad Replacement: Yes Stainless Hardware: Yes Weight: 430gTechnologies:DirectLinkSRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control.PiggyBack Reservoir:The brake fluid reservoir on SRAM’s latest lever design is optimised for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement-so you can switch your levers on the handlebar and run them moto style without hassle.Expandable Bladder SRAM’s new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistency. TPC Plus (Timing Port Closure):A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port to pressurise the system. SRAM’s new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.DOT 5.1Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Minion DHF was designed for the often loose and muddy conditions of aggressive all-mountain terrain. The DHF incorporates ramped knobs for low rolling resistance and channel-cut knobs to increase gripping edges, giving straight-line control and precise cornering.Directional, ramped knob design,Lightweight, single-ply casing,Compatible with front or rear,.SpecificationConditions: Loose Over Hard, Loose, Medium, Wet,Cornering Control: 1 2 3 4,Rolling Efficiency: 1 2 3 4,TPI: 60,Bead: Foldable,Ply Construction: Single,Compound: 3C Maxx Terra,Max PSI: 60,Tech: Tubeless Ready, EXO,.Technology3C Maxx Terra: An intermediate compound configuration used in select mountain tyres. 3C Maxx Terra is softer and offers more traction than 3C Maxx Speed, yet gives better treadwear and less rolling resistance than Maxx Grip.Tubeless Ready: Tubeless tyres give the rider with many benefits: the ability to run lower air pressures, which improves traction; lower rolling resistance when compared to a tube-type tyre; and less chance of flatting since there is no tube. Maxxis Tubeless Ready (TR) tyres provide the benefits of a UST tubeless tyre without the weight penalty. Our TR tyres use a standard casing and require the use of a liquid sealant in order to make them airtight.EXO: An extremely cut-resistant and abrasion-resistant material added to the sidewalls of select mountain tyres. This densely woven fabric is also lightweight and highly flexible, ensuring that the performance of the tyre remains unaffected. Choose EXO Protection for exceptionally rocky, treacherous trails where the chance of sidewall cuts and abrasions is high.
An all-mountain trail short that's durable enough to survive the bike park, but light enough for when you need to climb to the top yourself. Spacious opening at the knee for use with leg protection, and splash proof fabric on rear and inner thigh.Key Features:All-mountain MTB shorts,Robust but lightweight fabric,Adjustable waistband with press snap closure,Splash protection on inner thigh and back panel,Zipper pockets on each side,Stretch panel in back to aid in fit,Face fabric wetting out allows to quickly flap the surface dry.
Race Face Direct Mount Shimano Chainring Designed for cross country (XC), trail and enduro riding, this Direct Mount Shimano Chainring is cut from aerospace-grade aluminium for the ideal balance between strength and weight. Plus, this robust and stylish model mounts directly to any Race Face Cinch crankset and is specifically designed for use with Shimano 1x12 mountain bike (MTB) drivetrains. Finally, it features narrow-wide tooth profiling that securely holds onto your chain, giving you the confidence to keep pedalling when riding over rough terrains.Features: Material: 7075-T6 Aluminium, Aerospace-Grade strength, 4mm plate thickness Speed: 1x12-Speed Crankset Compatibility: Race Face Cinch Direct Mount Compatibility: Shimano 1x12-Speed Mountain Bike (MTB) drivetrains onlyBolt Circle Diameter (BCD): Direct Mount Tooth Profile: Narrow-Wide Chain Compatibility: For use with Shimano 12-Speed chains only Use: All-Mountain (AM), Cross Country (XC), Enduro, TrailWeight: 65g (32T)Buy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Our new Cinch Direct Mount Oval rings help you put down the watts in the best part of our pedal stroke. Ovals provide enhanced traction control when compared to conventional round rings, particularly in high torque, low cadence riding scenarios. We arrived at an optimal 10% ovality and 112.5° clocking, which can be achieved in both regular and flipped Super Boost positions by following the orientation callout on the rings. Our variable width tooth design will keep chain retention dialed utilizing clutched derailleurs, and is also compatible with many chainguides. Available in 4 of our most popular sizes, the Race Face Oval Ring gives you the advantage during the toughest part of your ride.Key Features:Optimized Pedal Stroke,1x Drivetrain Variable Width Tooth Profile Stops Dropped Chains,Super Boost Compatible,10 / 11 / 12 Speed Compatible,Wear resistant 7075 Aluminium,Compatible with all Race Face Cinch Cranks,Built for: XC / Trail / AM / Endruo,Size: 28T, 30T, 32T, 34T,Weight: 72g (32T).