This race-ready full-suspension mountain bike (MTB) frame features an ultra-strong T700/800 monocoque carbon fibre build, which allows you to benefit from its increased stiffness and strength without any weight penalty. Lightweight and responsive, Nukeproof has also kitted out this model with updated geometry for smooth handling, while its internally piped cable routing allows for a sleek, clean finish. Developed for the most demanding of terrain conditions, this version also comes equipped with a Factory Series Fox Float X2 rear shock for increased traction, tuneability and smoothness. Coming complete with 148x12mm Boost rear hub spacing and a range of updated features, this carbon frame is a perfect choice of upgrade for completing your enduro bike build. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. Carbon Fibre Full-Suspension Enduro MTB Frame To optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium. After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate Enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: · All new UD Carbon chassis · Improved suspension kinematics · Tube-In-Tube design for easy cable installation · All new geometry · Optimised sizing/fit - Small to XXL · SRAM UDH · Room for a 750ml water bottle inside the main front triangle The updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through seat angles which are bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 170mm Axle to Crown: 562mm Fork Offset: 37mm Rear Travel: 165mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L/XL/XXL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 275 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre frame Internally piped cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Factory fitted clear paint protection kit covering TT/DT/CS/SS. Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom CL, RM, Rezi CM tune, 230x65mm, Bearing End, 2x 0.3 spacer fitted. (SHORT ID: D7JJ) Headset: Nukeproof, 44-56 IITS Weight: 3.88Kgs/8.55lbs (Tubeless)
The 297 MX platform uses a 29" wheel at the front and a 27.5" at the rear, giving you the perfect balance of pace, stability, agility and control for riding anywhere on Earth. This kit optimises your Mega 290 into a custom super-enduro that ensures more front-end grip, enhanced rolling efficiency and playfulness on steep descents and technical terrain sections. For over 10 years, Nukeproof’s best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With 4 Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. The Nukeproof Mega has been on a constant development path to meet the demands of its athletes and customers alike, resulting in the launch of the latest Mega 297. This Nukeproof Mega 297c MX kit includes everything you need* to convert a 290c Mega V4 frame into a 297c MX bike, running a 29” front and 27.5” rear wheel. Why would you want to do that? A mixed wheel set-up uses a 29” wheel up front to maximise grip and rolling efficiency and replaces the 29” with a 27.5” wheel out back. The smaller 27.5” rear wheel ensures nimble handling and extra clearance for riders when leaning off the back of the bike (Especially on steep terrain). For a carbon Mega 290c frame conversion to 297c, no additional frame parts are required to complete the installation. All current 290c frame parts will transfer to the MX kit as shown in the fitting guide. Please Note: You will require a Boost 148mm 27.5” Rear wheel and tyre, not included. The MX kit is compatible with Mega V4 Carbon frames but will also work on a Mega 290 V4 Alloy frame. To complete an install to a Mega V4 Alloy you will also need the carbon lower swing link kit which can be found here and brake mount which can be found here. New gear cable and brake olive and barb will be required in most cases. To view the Nukeproof Mega MX Install Guide, please click here. Features: Parts Included: Nukeproof Mega V4 Carbon 297 Seat stays (X1) and Chainstays (X1). Made from ultra-strong monocoque UD Carbon Fibre Internally piped cable routing Enduro Bearings Pre-Installed Boost 148mm rear axle spacing 3D contoured Rubber frame protection included Factory fitted clear paint protection kit covering CS/SS Colour: Black FAQ: - Will this change the Geometry of my Mega? No. Nukeproof has designed the Mega as a series of parts that can be fitted together to make different configurations. As a result, the geometry remains the same. For exact geo’ please reference the Mega 297 geometry chart. - Can I fit this myself at home? Yes, referencing our install guide and you are a competent mechanic with the correct tools and the know-how for using them. Due to the complex nature of a full-suspension frame, there are a lot of moving parts that must be installed and assembled in the correct order. It is also imperative that the correct parts are greased, thread locked or torqued to specification. Failure to do so would void the warranty of the frame. If you do not have the know-how, then please contact your local Nukeproof dealer or skilled service centre. Specifications: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Wheels Size: Rear 27.5" Max Tyre Size: 2.6" Shock Size: 230x62.5mm Bearings Included: 4x F6802 LLU MAX Pre-Installed Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for SS/CS
The 297 MX platform uses a 29"" wheel at the front and a 27.5"" at the rear, giving you the perfect balance of pace, stability, agility and control for riding anywhere on Earth. This kit optimises your Giga 290 into a custom super-enduro that ensures more front-end grip, enhanced rolling efficiency and playfulness on steep descents and technical terrain sections. GLUTTONY – HABITUAL GREED OR EXCESS. As riders, we are all guilty of the gluttonous sin; we never stop striving, never stop pushing, enough is never enough in the hunt for the ultimate. It’s a constant push for bigger, longer, rougher, and faster with ever-increasing demands on the performance and capabilities of our bike. The pursuit is endless, and the result is that the Giga is now available in an all-new 297 MX platform. This Nukeproof Giga 297c MX kit includes everything you need* to convert a 290c Giga frame into a 297c MX bike, running a 29” front and 27.5” rear wheel. Why would you want to do that? A mixed wheel set-up uses a 29” wheel up front to maximise grip and rolling efficiency and replaces the 29” with a 27.5” wheel out back. The smaller 27.5” rear wheel ensures nimble handling and extra clearance for riders when leaning off the back of the bike (Especially on steep terrain). No additional frame parts are needed to install the Giga MX Kit. All current Giga 290 frame parts will transfer to the MX Kit when installing as shown in the Install Guide. Note: You will require a Boost 148mm 27.5” Rear wheel and tyre, not included. New gear cable and brake olive and barb will be required in most cases. The Nukeproof GIGA: Gluttony is not a sin. To view the Nukeproof Giga MX Install Guide, please click here. Features: Parts Included: Nukeproof Giga Carbon 297 Rear Triangle (X1). Made from ultra-strong monocoque UD Carbon Fibre Internally piped cable routing Boost 148mm rear axle spacing 3D contoured Rubber frame protection included Factory fitted clear paint protection kit covering CS/SS Colour: Black Compatible with 29” Giga Carbon frames only FAQ: - Will this change the Geometry of my Giga? No. We designed the Giga as a series of parts that can be fitted together to make different configurations. As a result, the geometry remains the same. For exact geometry please reference the GEO’ chart. - Can I fit this myself at home? Yes, using the linked Install Guide and you are a competent mechanic with the correct tools and the know-how for using them. Due to the complex nature of a full-suspension frame, there are a lot of moving parts that must be installed and assembled in the correct order. It is also imperative that the correct parts are greased, thread locked or torqued to specification. Failure to do so would void the warranty of the frame. If you do not have the know-how, then please contact your local Nukeproof dealer or skilled service centre. Specifications: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Shock Size: Can use a 205x60mm shock for 170mm travel or 205x65mm for 180mm travel Bearings Required: None Required Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for SS/CS
The Nukeproof Over Stem mount has been fully designed in house to install your Garmin and Wahoo Element computers to your bike. Designed specifically around our Horizon stem to ensure a clean and snug fit, the mount will also fit most other stem models as well. This will suit riders wishing to place their computer ahead of the steerer tube for more visibility but not in front of the bars where the computer can be vulnerable to impacts while Enduro or Downhill riding. To install the mount to your bike, you will need 7mm of excess steerer tube above your stem and is very easy to install. Remove current top cap and bolt Ensure you have at least 7mm of excess steerer Place Over Stem mount to steerer tube Fit any additional headset spacers if required Install polymer ¼ turn insert in orientation to suit Garmin or Wahoo Reinstall top cap and bolt
Compatible with the 2021-2022 Nukeproof Megawatt.
Compatible with the 2021-2022 Nukeproof Megawatt.
Compatible with the 2021-2022 Nukeproof Megawatt.
This E-bike chain guide for Shimano Steps features a backplate that's made from a lightweight alloy and it's available in six different colour options to complement your ride. Coming equipped with a durable nylon top guide with a co-moulded rubber inset, this model also offers a reduction in noise from your chain. Its top guide has also been extended to provide you with extra protection from your chain/chainring compared to the normal ISCG version. One final highlight is it's easy to install on most bikes without having to remove your cranks. The guide is supplied with various washers allowing you to fine-tune it to suit your chain line.
Genuine high-quality Nukeproof spare parts.
Genuine high-quality Nukeproof spare parts.
Genuine high-quality Nukeproof spare parts.
High-quality genuine Nukeproof spare parts.