4130 Cr-Mo HT Federal Motion Freecoaster hub axle. Weight: 0.183kg.
The Motion freecoaster features a completely new axle along with a nylon clutch retention spring. By replacing the traditional spring/ball system, the hub requires less maintenance and is a lot easier to disassemble than most. The nylon retention spring also reduces the internal drag and also enables faster rolling and smoother crankflips. The Motion is laced to a Federal Stance rim. the rim has a wide 40mm cross section which is designed to be in keeping with modern tyre sizes which helps the tyre maintain its correct profile. The triple box section combined with the wider profile makes the rim both stronger and stiffer than conventional rims and also helps to reduce the possibility of pinch flats. The wall thickness where the spokes are located has been increased by 22% from previous models to reduce the possibility of spokes pulling through the rim. Federal have also changed the material from Aluminium 6061 to 6066 which increases the strength by approximately 30%. The rims have a lower sidewall height (15mm compared to 20mm on most other rims) to give the rim a lower/wider appearance.The internal sidewall height is also reduced to keep the tyre firmly in place when inflated and the base of the rim is sunken to ease the installation and removal of tyres. ###section### Product Specs WHEEL SIZE:20" HUB:Federal Motion Freecoaster AXLE:14mm Chromoly Male DRIVE SIDE:Right Side Drive RIM:Federal Stance SPOKES:Butted NIPPLES:Brass WEIGHT:1377g / 48.6oz
Federal Motion Freecoaster with Aero XL rim, sold with guards and butted spokes. ###section### Product Specs WHEEL SIZE: 20" HUB: Federal Motion Freecoaster AXLE: Male DRIVE SIDE: Right Side Drive RIM: Aero XL SPOKES: steel butted spokes NIPPLES: TBC WEIGHT: TBC
Federal Motion Freecoaster with Aero XL rim, sold with guards and butted spokes. ###section### Product Specs WHEEL SIZE: 20" HUB: Federal Motion Freecoaster AXLE: Male DRIVE SIDE: Left Side Drive RIM: Aero XL SPOKES: steel butted spokes NIPPLES: TBC WEIGHT: TBC
The Motion freecoaster features a completely new axle along with a nylon clutch retention spring. By replacing the traditional spring/ball system, the hub requires less maintenance and is a lot easier to disassemble than most. The nylon retention spring also reduces the internal drag and also enables faster rolling and smoother crankflips. The Motion is laced to a Federal Stance rim. the rim has a wide 40mm cross section which is designed to be in keeping with modern tyre sizes which helps the tyre maintain its correct profile. The triple box section combined with the wider profile makes the rim both stronger and stiffer than conventional rims and also helps to reduce the possibility of pinch flats. The wall thickness where the spokes are located has been increased by 22% from previous models to reduce the possibility of spokes pulling through the rim. Federal have also changed the material from Aluminium 6061 to 6066 which increases the strength by approximately 30%. The rims have a lower sidewall height (15mm compared to 20mm on most other rims) to give the rim a lower/wider appearance.The internal sidewall height is also reduced to keep the tyre firmly in place when inflated and the base of the rim is sunken to ease the installation and removal of tyres. ###section### Product Specs WHEEL SIZE:20" HUB:Federal Motion Freecoaster AXLE:14mm Chromoly Male DRIVE SIDE:Left Side Drive RIM:Federal Stance SPOKES:Butted NIPPLES:Brass WEIGHT:1377g / 48.6oz
The new Federal Motion freecoaster hub features a completely new axle along with a nylon clutch retention spring. By replacing the traditional spring/ball system, the new hub requires less maintenance and is a lot easier to disassemble. The nylon retention spring also reduces the internal drag and enables faster rolling and smoother crankflips ###section### Product Specs HUB TYPE:Freecoaster AXLE:14mm Male DRIVER:9t SPOKE HOLES:36h WEIGHT:669g / 23.6oz
The new Federal Motion freecoaster hub features a completely new axle along with a nylon clutch retention spring. By replacing the traditional spring/ball system, the new hub requires less maintenance and is a lot easier to disassemble. The nylon retention spring also reduces the internal drag and enables faster rolling and smoother crankflips ###section### Product Specs HUB TYPE:Freecoaster AXLE:14mm Male DRIVER:9t SPOKE HOLES:36h WEIGHT:669g / 23.6oz
Motion short sleeve jerseys are mainly made from our proven ‘Spinn’ material. Lightweight and breathable, the fabric’s special two-layer construction efficiently draws sweat away from the skin. The mesh side panels deliver increased breathability and ventilation. A stylish low-cut collar provides extra comfort. The elongated sleeves are made of an elastic material so that they fit every body type and are finished with a bonded hem edge that reduces drag. The construction of the dual waistband has been specifically designed in two sections to the front part is elasticated and flexible for greater comfort whilst the rear part is highly elastic and features a silicone gripper that prevents the jersey from riding-up during cycling. The three compartment rear pocket is constructed in a pyramid shape which allows easy access to stowed items and gives a large volume for storage. The jersey comes with a detachable inner waterproof pouch that can be used to keep your valuables safe and dry. This attaches to a carabiner clip inside the pocket to prevent your valuables from falling out. There are reflective tabs either side of the rear pocket for increased visibility. Elbow-length aero-fit sleeves with bonded edge hem edge for reduced drag and maximum aerodynamic advantage. Mesh side panels deliver increased breathability and ventilation to enhance the evaporation cooling effect. Dual waistband has two sections, the front is elasticated and flexible for greater comfort, with the rear section highly elastic and backed with a silicone gripper to prevent your jersey from riding up. Three-compartment pyramid shaped rear pocket provides large volume with easy access to stowed items with small opening for cable access. Inner removable waterproof pouch for keeps your valuables dry with carabiner clip inside pocket to prevent valuables from falling out. Reflective elements positioned on both sides of the rear pocket for increased visibility.
Motion short sleeve jerseys are mainly made from our proven ‘Spinn’ material. Lightweight and breathable, the fabric’s special two-layer construction efficiently draws sweat away from the skin. The mesh side panels deliver increased breathability and ventilation. A stylish low-cut collar provides extra comfort. The elongated sleeves are made of an elastic material so that they fit every body type and are finished with a bonded hem edge that reduces drag. The construction of the dual waistband has been specifically designed in two sections to the front part is elasticated and flexible for greater comfort whilst the rear part is highly elastic and features a silicone gripper that prevents the jersey from riding-up during cycling. The three compartment rear pocket is constructed in a pyramid shape which allows easy access to stowed items and gives a large volume for storage. The jersey comes with a detachable inner waterproof pouch that can be used to keep your valuables safe and dry. This attaches to a carabiner clip inside the pocket to prevent your valuables from falling out. There are reflective tabs either side of the rear pocket for increased visibility. Elbow-length aero-fit sleeves with bonded edge hem edge for reduced drag and maximum aerodynamic advantage. Mesh side panels deliver increased breathability and ventilation to enhance the evaporation cooling effect. Dual waistband has two sections, the front is elasticated and flexible for greater comfort, with the rear section highly elastic and backed with a silicone gripper to prevent your jersey from riding up. Three-compartment pyramid shaped rear pocket provides large volume with easy access to stowed items with small opening for cable access. Inner removable waterproof pouch for keeps your valuables dry with carabiner clip inside pocket to prevent valuables from falling out. Reflective elements positioned on both sides of the rear pocket for increased visibility.
Motion short sleeve jerseys are mainly made from our proven ‘Spinn’ material. Lightweight and breathable, the fabric’s special two-layer construction efficiently draws sweat away from the skin. The mesh side panels deliver increased breathability and ventilation. A stylish low-cut collar provides extra comfort. The elongated sleeves are made of an elastic material so that they fit every body type and are finished with a bonded hem edge that reduces drag. The construction of the dual waistband has been specifically designed in two sections to the front part is elasticated and flexible for greater comfort whilst the rear part is highly elastic and features a silicone gripper that prevents the jersey from riding-up during cycling. The three compartment rear pocket is constructed in a pyramid shape which allows easy access to stowed items and gives a large volume for storage. The jersey comes with a detachable inner waterproof pouch that can be used to keep your valuables safe and dry. This attaches to a carabiner clip inside the pocket to prevent your valuables from falling out. There are reflective tabs either side of the rear pocket for increased visibility. Elbow-length aero-fit sleeves with bonded edge hem edge for reduced drag and maximum aerodynamic advantage. Mesh side panels deliver increased breathability and ventilation to enhance the evaporation cooling effect. Dual waistband has two sections, the front is elasticated and flexible for greater comfort, with the rear section highly elastic and backed with a silicone gripper to prevent your jersey from riding up. Three-compartment pyramid shaped rear pocket provides large volume with easy access to stowed items with small opening for cable access. Inner removable waterproof pouch for keeps your valuables dry with carabiner clip inside pocket to prevent valuables from falling out. Reflective elements positioned on both sides of the rear pocket for increased visibility.
Motion short sleeve jerseys are mainly made from our proven ‘Spinn’ material. Lightweight and breathable, the fabric’s special two-layer construction efficiently draws sweat away from the skin. The mesh side panels deliver increased breathability and ventilation. A stylish low-cut collar provides extra comfort. The elongated sleeves are made of an elastic material so that they fit every body type and are finished with a bonded hem edge that reduces drag. The construction of the dual waistband has been specifically designed in two sections to the front part is elasticated and flexible for greater comfort whilst the rear part is highly elastic and features a silicone gripper that prevents the jersey from riding-up during cycling. The three compartment rear pocket is constructed in a pyramid shape which allows easy access to stowed items and gives a large volume for storage. The jersey comes with a detachable inner waterproof pouch that can be used to keep your valuables safe and dry. This attaches to a carabiner clip inside the pocket to prevent your valuables from falling out. There are reflective tabs either side of the rear pocket for increased visibility. Elbow-length aero-fit sleeves with bonded edge hem edge for reduced drag and maximum aerodynamic advantage. Mesh side panels deliver increased breathability and ventilation to enhance the evaporation cooling effect. Dual waistband has two sections, the front is elasticated and flexible for greater comfort, with the rear section highly elastic and backed with a silicone gripper to prevent your jersey from riding up. Three-compartment pyramid shaped rear pocket provides large volume with easy access to stowed items with small opening for cable access. Inner removable waterproof pouch for keeps your valuables dry with carabiner clip inside pocket to prevent valuables from falling out. Reflective elements positioned on both sides of the rear pocket for increased visibility.
Motion short sleeve jerseys are mainly made from our proven ‘Spinn’ material. Lightweight and breathable, the fabric’s special two-layer construction efficiently draws sweat away from the skin. The mesh side panels deliver increased breathability and ventilation. A stylish low-cut collar provides extra comfort. The elongated sleeves are made of an elastic material so that they fit every body type and are finished with a bonded hem edge that reduces drag. The construction of the dual waistband has been specifically designed in two sections to the front part is elasticated and flexible for greater comfort whilst the rear part is highly elastic and features a silicone gripper that prevents the jersey from riding-up during cycling. The three compartment rear pocket is constructed in a pyramid shape which allows easy access to stowed items and gives a large volume for storage. The jersey comes with a detachable inner waterproof pouch that can be used to keep your valuables safe and dry. This attaches to a carabiner clip inside the pocket to prevent your valuables from falling out. There are reflective tabs either side of the rear pocket for increased visibility. Elbow-length aero-fit sleeves with bonded edge hem edge for reduced drag and maximum aerodynamic advantage. Mesh side panels deliver increased breathability and ventilation to enhance the evaporation cooling effect. Dual waistband has two sections, the front is elasticated and flexible for greater comfort, with the rear section highly elastic and backed with a silicone gripper to prevent your jersey from riding up. Three-compartment pyramid shaped rear pocket provides large volume with easy access to stowed items with small opening for cable access. Inner removable waterproof pouch for keeps your valuables dry with carabiner clip inside pocket to prevent valuables from falling out. Reflective elements positioned on both sides of the rear pocket for increased visibility.