Maxxis Minion DHF MTB Tyre (3C-EXO-TR)This downhill front (DHF) mountain bike (MTB) tyre from Maxxis offers you a reliable performance, whatever challenges you meet on the trail. Made from a 3C Maxx Terra compound and featuring a directional tread design and EXO+ sidewall puncture protection, this tyre is ready for tackling tough mountain terrains. Features:Use: Mountain Bike (MTB)Compound: 3C Maxx TerraCasing TPI: 120Tyre Bead: FoldingTyre Type: TubelessTubeless Ready: YesMax Recommended Pressure PSI: 40Size/Width: 27.5/2.6; 29/2.6Weight: 27.5x2.6: 858g; 29x2.6: 1115gTechnologiesEXO+ Protection: Combining SilkShield and EXO puncture protection materials, Maxxis have created this extra-effective sidewall protector. The improvements are clear: tread puncture protection goes up by 27%, while sidewall durability by 51% and resistance to pinch flats by 28% - an all-round win for your enduro/downhill performance.Tubeless Ready: Tubeless tyres provide the rider with many benefits: the ability to run lower air pressures, which improves traction; lower rolling resistance when compared to a tube-type tyre; and less chance of flatting since there is no tube. Maxxis Tubeless Ready (TR) tyres provide the benefits of a UST tubeless tyre without the weight penalty. Their TR tyres use a standard casing and require the use of a liquid sealant in order to make them airtight. Maxxis Tubeless Ready tyres are the only Maxxis tyres approved for use with liquid sealants. Using a liquid sealant in any non-TR Maxxis tyre will void the warranty.3C Mountain: Maxxis 3C Triple Compound mountain technology uses a harder, longer-lasting base layer and two progressively softer top layers in order to optimize traction and stability. Maxxis offers three different configurations of our 3C Triple Compound mountain technology: Maxx Speed, Maxx Terra and Maxx Grip.MAXX TERRA: 3C Maxx Terra is softer and offers more traction than 3C Maxx Speed, yet provides better treadwear and less rolling resistance than Maxx Grip. The perfect compound if you like to ride exceptionally fast and tackle every obstacle with confidence.Wide Trail (WT): This construction optimises the tyre tread layout and profile on today’s modern wide rims. Traditional tyres are designed around older, narrower rims and create an overly square tyre profile, leading to less than optimal performance. WT tyres obtain peak performance when used with an inner rim width of 35mm but are proven to perform exceptionally with rim widths from 30 - 35mm.Buy Maxxis Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Maxxis Minion DHR II WT MTB Tyre (3C - TR - DD)The fast-rolling and high grip Minion DHR II WT mountain bike (MTB) tyre features some of Maxxis' finest technological breakthroughs to give you a fierce advantage on downhill trails. The aggressive front-specific tread features wide side knobs to give it a powerful cornering power on the descent, further enhanced by the tread's expanded width. The Maxx Terra compound used throughout gives remarkable traction and a lower rolling resistance, ensuring speed and grip are kept consistent even in tough weather conditions. Plus, the DoubleDown casing ensures enduro-levels of puncture resistance without weighing down your bike.Features: Tyre Type: Clincher Bead Type: Folding Compound: 3C MAXX TERRA Casing: 2/120 TPI Maximum Pressure: 50 PSI Tubeless Compatible: Yes Directional, ramped knob design - front Tough double-ply casing Designed as a front-specific tyre but can also be used as a rear Sold individually Weight: 1.2kgTechnologies Tubeless Ready: Tubeless tyres provide the rider with many benefits: the ability to run lower air pressures, which improves traction; lower rolling resistance when compared to a tube-type tyre; and less chance of flatting since there is no tube. Maxxis Tubeless Ready (TR) tyres provide the benefits of a UST tubeless tyre without the weight penalty. Maxxis TR tyres use a standard casing and require the use of a liquid sealant to make them airtight. Maxxis Tubeless Ready tyres are the only Maxxis tyres approved for use with liquid sealants Wide Trail (WT): This construction optimises the tyre tread layout and profile on today's modern wide rims. Traditional tyres are designed around older, narrower rims and create an overly square tyre profile, leading to less than optimal performance. WT tyres obtain peak performance when used with an inner rim width of 35mm but are proven to perform exceptionally with rim widths from 30 - 35mm Double Down: DoubleDown (DD) is the next step in the evolution of the dual-ply tyre casing for enduro racing. Two 120 TPI casing layers reinforced with a butyl insert provide the enduro racer with the support and protection of a downhill tyre, but in a lighter package 3C Triple Compound: Maxxis 3C Triple Compound mountain technology uses a harder, longer-lasting base layer and two progressively softer top layers to optimise traction and stability MAXX TERRA: 3C Maxx Terra is softer and offers more traction than 3C Maxx Speed, yet provides better treadwear and less rolling resistance than Maxx Grip. The perfect compound if you like to ride exceptionally fast and tackle every obstacle with confidenceBuy Maxxis Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Maxxis Minion FBF Front Mountain Bike TyreThis beefed-up version of the Maxxis DH tyre offers much of the same benefits but increases the scale and strength for a more powerful overall performance. The dual compounds used in the tread allowed for a super-low rolling resistance while also increasing cornering grip, allowing this tyre to blast through most terrain at high speeds. Plus, this folding tyre can be used tubeless to increase uphill traction and ride smoothness significantly.Features: Casing: 120 TPI Bead: Folding Compound: Dual EXO Max Pressure: 30 psi Weight: 1.27kgTechnologies: EXO Dual Compound: Two compounds used within the tread of select tyres to offer lower rolling resistance and increased cornering grip. Tubeless Ready: Tubeless tyres provide many benefits: they offer the ability to run lower air pressures, which dramatically improves traction; it provides a lower rolling resistance compared to when using tubes and a drastic reduction in the change of getting a flat tyre since there is no tube.Buy Maxxis Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 4 Freehub AssemblyWith a 44 tooth engagement from its 4-pawl ratchet design, this genuine Hope replacement Pro 4 freehub gives you almost instant pedal response as take off. Making the most of every acceleration burst, it also spins on smooth rolling cartridge bearings. These stainless steel bearings are fully sealed for reliable and consistent performance in all conditions.Features: Genuine replacement part Compatible with Hope Pro 4 rear hubs only Designed, tested and manufactured by Hope in its Barnoldswick plant 4 pawl ratchet with 44 tooth engagement (8.2°) Sealed stainless steel cartridge bearings Please Note: The images for the HUB538 models should be used as a guide only. A black or silver colour may be sent Included: Freehub with sealed bearings and 4 pawls installed Weight: 82g (approx)Specifications: HUB537 (XX1/XD): For use with SRAM XD (11 Speed) Cassette only (*Excluding PG-1130 and PG-1230) HUB536 (11 Speed - Aluminium): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB540 (11 Speed - Steel): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB538-QR (QR - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-10 (10mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-12 (12mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-X12 - (X12 - Aluminium): Hope mountain bike (MTB) cassettes only HUB545-QR (QR - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside QR cap) HUB545-12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside 12mm cap) HUB545-x12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside X12 cap)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 4 Freehub AssemblyWith a 44 tooth engagement from its 4-pawl ratchet design, this genuine Hope replacement Pro 4 freehub gives you almost instant pedal response as take off. Making the most of every acceleration burst, it also spins on smooth rolling cartridge bearings. These stainless steel bearings are fully sealed for reliable and consistent performance in all conditions.Features: Genuine replacement part Compatible with Hope Pro 4 rear hubs only Designed, tested and manufactured by Hope in its Barnoldswick plant 4 pawl ratchet with 44 tooth engagement (8.2°) Sealed stainless steel cartridge bearings Please Note: The images for the HUB538 models should be used as a guide only. A black or silver colour may be sent Included: Freehub with sealed bearings and 4 pawls installed Weight: 82g (approx)Specifications: HUB537 (XX1/XD): For use with SRAM XD (11 Speed) Cassette only (*Excluding PG-1130 and PG-1230) HUB536 (11 Speed - Aluminium): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB540 (11 Speed - Steel): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB538-QR (QR - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-10 (10mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-12 (12mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-X12 - (X12 - Aluminium): Hope mountain bike (MTB) cassettes only HUB545-QR (QR - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside QR cap) HUB545-12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside 12mm cap) HUB545-x12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside X12 cap)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 4 Freehub AssemblyWith a 44 tooth engagement from its 4-pawl ratchet design, this genuine Hope replacement Pro 4 freehub gives you almost instant pedal response as take off. Making the most of every acceleration burst, it also spins on smooth rolling cartridge bearings. These stainless steel bearings are fully sealed for reliable and consistent performance in all conditions.Features: Genuine replacement part Compatible with Hope Pro 4 rear hubs only Designed, tested and manufactured by Hope in its Barnoldswick plant 4 pawl ratchet with 44 tooth engagement (8.2°) Sealed stainless steel cartridge bearings Please Note: The images for the HUB538 models should be used as a guide only. A black or silver colour may be sent Included: Freehub with sealed bearings and 4 pawls installed Weight: 82g (approx)Specifications: HUB537 (XX1/XD): For use with SRAM XD (11 Speed) Cassette only (*Excluding PG-1130 and PG-1230) HUB536 (11 Speed - Aluminium): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB540 (11 Speed - Steel): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB538-QR (QR - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-10 (10mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-12 (12mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-X12 - (X12 - Aluminium): Hope mountain bike (MTB) cassettes only HUB545-QR (QR - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside QR cap) HUB545-12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside 12mm cap) HUB545-x12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside X12 cap)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Stay Strong Axis Mini Race Pedals are built and designed specifically for BMX Racing. Every part of their design was carefully planned to cut weight, increase strength and reliability. Alloy extrusion and CNC finished they're super thin yet still strong, with sealed bearings that's are smooth and long lasting. The replaceable pin design adds all the grip you need keeping your feet planted when you're powering round the track. ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Metal BEARINGS: Sealed PACK SIZE: 2 (Pair) WEIGHT: 310g (pair)
The 6-piece Machined Aluminium Touchpoint Set. An ergonomic upgrade for your Brompton.Hinges, levers and saddle quick release, feel the difference with smooth black anodised aluminium parts that move with minimal friction. First seen on the Brompton CHPT3 V2 and now available across all Brompton models.SpecificationThe set includes 2 Hinge Clamp Levers, 2 Hinge Clamp plates, rear frame clip and seat quick release.Engineered in lightweight CNC Machined Aluminium,Colour: Anodised Black,Compatible with all Brompton Bikes,Fit yourself with a 10mm spanner and a hex key (not supplied).
The Mini L Smart Charger will charge Light & Motion 2 3 and 6-cell battery packs and for the world traveller it includes various adapter blades. Compatible with Light & Motion 2 3 and 6-cell batteriesAlso compatible with older 9-cell Li-ion batteries. Includes outlet adapters for US/JP UK EU and AUS.
The affordable all-rounder for your mountain bike customers.For all those who rely on stability and braking power, without compromising on weight. The Carbotecture® master keeps the total weight down at only 230 grams.A Strong All-Rounder - The MT4 is the ideal companion on trails and roads. The brake master is made of lightweight and durable Carbotecture composite material. Thanks to its rigid Disctube cable and one-piece calliper, the MT4 gives you the best braking performance.,Price / Performance Wonder - The MT4 is proof that versatility and outstanding performance don’t have to be expensive..Specification:Tubing length: 2,200 mm,Weight: 230 g,Material housing: Carbotecture®,Reach Adjust: T25 tool,Color: master black / caliper black,Accent color: silver,Recommended rotor: Storm SL.2 / HC / CL 160 mm / 180 mm / 203 mm; MDR-C 180 mm / 203 mm ,Scope of delivery: 1 single brake incl. manual and small parts bag.
The Minion DHR II+ is the perfect complement to the DHF+. Proven centre paddle knobs not only provide decreased rolling resistance but also offer increased braking when the trail gets loose. Those knobs allow you to brake harder in the rear to maintain your balance as you let the high volume casing absorb any trail irregularities.Rear specific tread pattern,Paddle-like centre knobs for improved braking,Ramped and siped tread to roll fast and track straight under braking,.SpecificationConditions: Hardpack, Loose Over Hard, Loose, Medium,Cornering Control: 1 2 3 4,Rolling Efficiency: 1 2 3 4,TPI: 120,Bead: Foldable,Ply Construction: Single,Compound: 3C Maxx Terra,Max PSI: 30,Tech: Tubeless Ready, EXO+,.Technology3C Maxx Terra: An intermediate compound configuration used in select mountain tyres. 3C Maxx Terra is softer and offers more traction than 3C Maxx Speed, yet provides better treadwear and less rolling resistance than Maxx Grip.Tubeless Ready: Tubeless tyres provide the rider with many benefits: the ability to run lower air pressures, which improves traction; lower rolling resistance when compared to a tube-type tyre; and less chance of flatting since there is no tube. Maxxis Tubeless Ready (TR) tyres provide the benefits of a UST tubeless tyre without the weight penalty. Our TR tyres use a standard casing and require the use of a liquid sealant in order to make them airtightEXO+: Combines two of Maxxis best puncture protection materials: SilkShield and EXO. Combined these improve tread puncture protection by 27%; sidewall durability by 51% and resistance to pinch flats by 28%.
6Al4V Titanium or Aluminum 6-pawl drivers for Profile Elite BMX cassette hubs & Elite MTB 1-spd cassette hubs. Drivers include bearings & seals. Pawls, springs, & cogs not included.