The Minion DHF is a legend of the Maxxis range. Fitted front or rear, the Minion DHF is a corner lover s dream, giving you the confidence to hug the inside line in true Sam Hill style. Designed a solid all-rounder that excels in loose conditions, the slightly ramped centre tread keeps rolling resistance reasonable while the aggressive side knobs keep you hooked up no matter how low you go! Available in a huge range of sizes and compounds, the Minion DHF is a superb choice for your Enduro or Downhill bike.Excellent braking and cornering tractionAggressive cornering knobsDirectional, ramped centre tread Weight from 700gPlease note: All tyres with a width of 2.5 or 2.6 are the WT (Wide Trail) versions..
The Cateye PB-600 Super Mini Bell is an Aluminium bell with a ribbed lever that makes it easily used in any weather.Colours: Black / SilverSound Volume: 88.0dBHandlebar size: 22.2mmBell Diameter: 48mmWeight: 28g
The Hibiki Bell from Cateye is an easy to operate gong type bell with 360 degrees adjustable puller.Colour: Silver / Black / PolishSound Volume: 89.0dBHandlebar size: 25.4mm ( 22.2mm when spacer used)Bell Diameter: 45mmWeight: 52g
The Hibiki Bell from Cateye is an easy to operate gong type bell with 360 degrees adjustable puller.Colour: Silver / Black / PolishSound Volume: 89.0dBHandlebar size: 25.4mm ( 22.2mm when spacer used)Bell Diameter: 45mmWeight: 52g
The Cateye Wearable Mini Battery Light is perfect for providing a small amount of extra visibility at night or during the day thanks to it's small, versatile design that can be clipped onto a bag or jersey pocket and can even be mounted to your bike using the included rubber strap.Lightweight and versatile wearable light that can also be fitted to your bikeSuper lightweight at just 12g including CR2032 battery3 modes provide up to 400 hours of burn timeThe Wearable Mini's tiny size (just 45.5 x 44 x 20mm) make it easy to carry in a saddle bag or jersey pocket and mean it can deployed at a moments notice, whether that be clipped to a bag or your jersey or even attached to your bike. The Wearable Mini has 3 power modes to suit differing light conditions or extend burn time, with the easily replaceable CR2032 battery providing up to 400 hours of burn time in Flashing mode. Lightweight, incredibly portable and more than bright enough for night or day-time riding, the Cateye Wearable Mini Battery Light is perfect for riders looking for a small additional light to provide extra visibility when out on the road.Power Modes/Burntime:Constant 50 hours Flashing 400 hoursRapid 100 hours
The Cateye PB-600 Super Mini Bell is an Aluminium bell with a ribbed lever that makes it easily used in any weather.Colours: Black / SilverSound Volume: 88.0dBHandlebar size: 22.2mmBell Diameter: 48mmWeight: 28g
The Cateye OH-1400 Aluminium Bell is a tool free mount attaches quickly to handlebars 19-32 mm. Aluminium 30mm diameter bell can also be mounted with a light or computer FlexTight bracket.Colour: BlackSound Volume: 90.0dBHandlebar size: 22-32mmBell Diameter: 33mmWeight: 25g
The Moon Gemini Front & Rear Cycle Light Set offers 60 lumens from high brightness white LEDs on the front, and 20 lumens from high brightness red LEDs on the rear. CNC aluminium heat sink casingAuto safe mode Compatible with all round bars and AERO style barsAutomatic fully charged cut-off systemApprox. weight: 28g eachThe Geminis have a total angle of 360 degrees and a spot angle of 95 degrees. The 7 up front and 6 to the rear modes available include a double blast day flash mode. With a charge time of 2 hours the Geminis provide a runtime of up to 30 hours, depending on mode. They are also equipped with an auto safe mode, which indicates a remaining runtime of 1 hour.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight.We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length. The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride. The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight.We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length. The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride. The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.