All the style of the Pendleton Somerby with added, electrically powered, pedal assistance. The 317Wh battery delivers up to 50 miles of range through a rear reliable Bafang hub motor with speed sensor. This extra power is enough to guarantee effortless rides, taking the strain out of hills and making moving off from a standstill much easier. With a low step-through frame, getting onto the bike is much less awkward too. The 8-speed Shimano gears will ensure you glide along smoothly and built in mudguards and chainguard will protect your clothes should you hit any puddles. Powerful Tektro alloy V-brakes will bring you to a steady halt at the end of every stylish ride. Be rest assured, this model also comes with a 2-year warranty on all electrical components. This bike has been designed with your ultimate comfort in mind; with the upright seated position, relaxed handlebars, stylish ergonomic grips and a Velo sprung - deep padded saddle. Battery:The Somerby features a Samsung battery mounted into the rear luggage rack. With a capacity of 317Wh / 8.8Ah and a range of up to 50miles per charge the Somerby is very capable of going the distance on any leisure ride. As standard on all Pendleton E-bikes, the Somerby E comes with an integrated smart control system that protects the battery from overheating, short circuiting or overcharging. The battery re-charges in only 5 hours and comes with a full 2-year / 500 charge warranty. Note; The total travel distance will depend on the capacity of the battery, rider and luggage weight, power mode setting and riding style. Motor:The Pendleton Somerby E is fitted with a rear hub Bafang 36V 250W electric motor system, seamlessly integrated into the rear wheel. The system is equipped with a Speed sensor, which automatically engages the motor once you begin pedalling to provide power assistance to your ride. As required by law, the motor will automatically stop assisting you once you achieve a speed of 15.5mph. Head-Unit:The electric motor of the Pendleton Somerby E is controlled via a 3-function LED display –offering Low, Medium or High levels of power-assist. The display / control unit includes an integrated push button to switch between the 3 assistance levels, alongside the power On/Off button. The display is located on the left side of the handlebar and its compact size reduces the risk of damage when in use. This display also allows you to use the bike in ‘walk’ mode. Frame / Components:Frame: Lightweight aluminium step-throughGears: 8-speed Shimano AceraBrakes: Tektro Aluminium V-brakesTyres: Stylish 700x38c with Puncture ProtectionAccessories: Full-length metal mudguards, chainguards and luggage rackAvailable in Mint, Midnight Blue and White/Navy
All the style of the Pendleton Somerby with added, electrically powered, pedal assistance. The 317Wh battery delivers up to 50 miles of range through a rear reliable Bafang hub motor with speed sensor. This extra power is enough to guarantee effortless rides, taking the strain out of hills and making moving off from a standstill much easier. With a low step-through frame, getting onto the bike is much less awkward too. The 8-speed Shimano gears will ensure you glide along smoothly and built in mudguards and chainguard will protect your clothes should you hit any puddles. Powerful Tektro alloy V-brakes will bring you to a steady halt at the end of every stylish ride. Be rest assured, this model also comes with a 2-year warranty on all electrical components. This bike has been designed with your ultimate comfort in mind; with the upright seated position, relaxed handlebars, stylish ergonomic grips and a Velo sprung - deep padded saddle. Battery:The Somerby features a Samsung battery mounted into the rear luggage rack. With a capacity of 317Wh / 8.8Ah and a range of up to 50miles per charge the Somerby is very capable of going the distance on any leisure ride. As standard on all Pendleton E-bikes, the Somerby E comes with an integrated smart control system that protects the battery from overheating, short circuiting or overcharging. The battery re-charges in only 5 hours and comes with a full 2-year / 500 charge warranty. Note; The total travel distance will depend on the capacity of the battery, rider and luggage weight, power mode setting and riding style. Motor:The Pendleton Somerby E is fitted with a rear hub Bafang 36V 250W electric motor system, seamlessly integrated into the rear wheel. The system is equipped with a Speed sensor, which automatically engages the motor once you begin pedalling to provide power assistance to your ride. As required by law, the motor will automatically stop assisting you once you achieve a speed of 15.5mph. Head-Unit:The electric motor of the Pendleton Somerby E is controlled via a 3-function LED display –offering Low, Medium or High levels of power-assist. The display / control unit includes an integrated push button to switch between the 3 assistance levels, alongside the power On/Off button. The display is located on the left side of the handlebar and its compact size reduces the risk of damage when in use. This display also allows you to use the bike in ‘walk’ mode. Frame / Components:Frame: Lightweight aluminium step-throughGears: 8-speed Shimano AceraBrakes: Tektro Aluminium V-brakesTyres: Stylish 700x38c with Puncture ProtectionAccessories: Full-length metal mudguards, chainguards and luggage rack
Whether you've lost a valve cap or just want to bling your existing pair of Peaty's valves, this kit gives you everything you need. Compatible with all Peaty's Tubeless Valves. Includes: 1x spoke key cap (for 3.4mm spoke nipple), 1x valve core remover cap & 2x lock rings.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Everyone knows that a straight line is the fastest line! That's why Peaty's made their Holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.Available in 12x Chris King coloursUnique Patent Pending compact straight line design for maximum airflowSimply push down to inflateUnique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without glovesEach kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeveIt's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike. Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the O-rings to the awesome Chris king anodized colours.Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.
Everyone knows that a straight line is the fastest line! That's why Peaty's made their Holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.Available in 12x Chris King coloursUnique Patent Pending compact straight line design for maximum airflowSimply push down to inflateUnique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without glovesEach kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeveIt's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bikeMade from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the O-rings to the awesome Chris King anodized colours. Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.
When it comes to riding in cool and damp conditions it’s hard to beat the thermal regulation properties of natural Merino wool. • Thermal Merino wool/Nylon fabric for comfort odor control and natural body temperature management• Hand-stitched design lines on chest panel for added visual interest• Full length Vislon® zipper for ventilation and ease of use• Three back pockets plus additional single zippered back pocket for securing valuables• BioViz® reflective elements for low-light visibility
An absolute essential for cool weather riding our best-selling warmer is now updated with water shedding Thermal Fleece fabric with PI Dry™ technology for all weather performance. Plush wide elastic binding with silicone gripper for a stay-up fit BioViz™ reflective elements for low-light visibility
Introducing the PBK Encompass collection. A range dedicated to the all year rider, featuring key pieces that should be part of any cyclist’s wardrobe. The perfect piece to complete your wardrobe, our versatile leg warmers will keep you warm for those chillier days when full winter bib tights aren’t required. Pair with the PBK encompass bib shorts. Important Features: Fleece lined for warmth Silicone grippers PBK Branding