The SQlab 702 Grips are designed and shaped to offers a maximum contact area, support and comfort. The extra-large wing supports your wrist and evenly distributes pressure thanks to its very large contact area. This makes them perfect for hybrid, trekking and city bikes.Unique design offers maximum hand contact area for supreme support and comfortRaised grip end picks up the side of the hand and supports it better than regular gripsHelps to relieve pressure on the ulnar nerve, the median nerve and the carpal tunnel passVarious rubber compounds ensure a perfect grip level and high comfort139mm long and lightweight (from just 215g - size S)
The Vybe is Ultimate USE s latest generation suspension seatpost with 50mm of active tuneable travel. It tames the trails increasing your power, endurance and comfort. The suspension of the Vybe reduces the effect of terrain on the body allowing energy to be concentrated on the pedals. Consistent seated pedaling allows for increased power and comfort so you ll finish your ride faster and fresher and ready to ride again.The Vybe features the SUMO clamp, the highly acclaimed, quick fitting, simple to adjust system designed to ensure the perfect saddle position (full range of saddle tilt available). All suspension seatposts are fully serviceable, adjustable for rider weight and give many years of loyal service with comfort, recovery and performance benefits. To achieve the optimum ride, choose your spring option from soft, medium or hard according to your weight. Please see the Shockpost Spring Options tab for more details. There is also a 'Pre-Load Adjustment' screw at the bottom of the post allowing you to fine tune the post to give you the ultimate ride.*Supplied with a standard 7x7mm clamp. Other size clamps to fit oval carbon rails are available. Please see the saddle manufacturers measurement, if the rails are wrapped please check the measurements are still valid.Material: AluminiumLength: 400mmSetback: 10mmFinish: UD MattApprox. Weight: 400 482g
The MET Strale Road Helmet is a super light, super comfortable and super cooling helmet with an incredibly safe and innovative design. The exceptional air channelling system design features a large central vent that takes in cool air, along with side channels, maximizing overall ventilation. And thanks to the Venturi effect, hot air exits through the back-exhaust vents, pushing it away from the rider. All of this while maintaining impressive aerodynamics.Outer shell construction: In-mould / Inner shell: Shock absorbing polystyreneChin strap buckle: Anti-pinch buckleStraps and divider: Anti-slip cam dividerFit system: Safe-T Duo. Ponytail compatibleComfort: Anti-allergenic interior padding. Hand washable /Be seen: Reflective rear stickerCompatibility: Duo LED light / Certifications: CE, AS/NZ, USThe helmet comes equipped with the Safe-T Duo Fit system, which has micro-metric adjustment, 4 vertical adjustments, and is also ponytail compatible. The cam divider provides two levels of extra stability and security, a built-in crimping bar on the divider that grips the helmet strap and a snap on the lip of the divider locking down on the strap. For extra safety the Strale is equipped with a rear reflective sticker and a led light compatible fitting system. This feather-light and unobtrusive helmet is the solution to providing an optimal riding experience.Size Chart:
The 711 Tech & Trail 2.0 Grips are an ergonomic grip for long distances! Perfect fit, cushioning and comfort for the mountain bike.Perfect grip ergonomics for long-distance routes and use in racing on sports-oriented mountain bikesOffers shock absorption and comfortVarious rubber compounds ensure a perfect grip level and high comfortSQlab only use the best possible materials. This guarantees you a long service life and no sticking of the grip rubber.The 711 features perfect grip ergonomics for long-distance routes and use in racing on sports-oriented mountain bikes. A well thought-out, highly ergonomic shape offers an especially secure grip and comfort. The clamp moved from the outside to the inside during the product development. This increases the shock absorption and comfort on the hand s outer side.In addition, the outside surface area was increased using every trick in the book, making it as comfortable as a wing grip despite not being one. As round as necessary and as flat as possible: With the 711 grip, the outer contact surface is pressed flat, thus reducing the pressure peaks many times over. The grip security is supported by the Ergobar. This results in a flat, slightly angular grip bottom and offers a perfect form fit. This allows the grip to be guided loosely while still always keeping the bike under control.The advantages of the grip are particularly noticeable at the end of a tough marathon, but they also increase the fun on long tours or quick trips after work. Increased performance through perfect ergonomics. Various rubber compounds ensure a perfect grip level and high comfort. SQlab only use the best possible materials. This guarantees you a long service life and no sticking of the grip rubber. The personal grip size is what matters. With the 711 grip, the sizes differ in diameter and shape.
Sometimes it's the simplest ideas that are the best; RRP's Neoguard replaces that bit of inner tube you had cable-tied to the fork, providing maximum coverage for your eyes and face against mud flicked off the front wheel.Made from thick neoprene to allow for stretching and compression during suspension travel, it attaches to the fork crown and brace using the integrated velcro straps, making it easy to install and remove when required without risking damage to the fork. X-Small: 80-130mm TravelSmall: 130-160mm TravelMedium: 160-200mm TravelLarge: 200mm + Travel (Dual Crown)
BikeShield keeps your bike in mint condition by protecting it from scratches, grit and stones. It offers clear advantages over other products which aim to provide invisible protection for bike frames thanks a number of clever design features. Ultra-tough protection for bicycle frameEasy to apply or remove by hand and leaves no sticky residueInvisible on the bikeLong lasting and will not yellow with ageIncludes two cut to size rectangle shieldsOn the bike it is invisible and you can simply peel it off and your bike looks like new! This Tube Shield Protection is perfect for the larger tubes on your bike, such as the seat tube, down tube and top tube, protecting them from potential damage. The shield is ultra-tough, will not yellow with age and is long-lasting, giving your bike years of worry free protection. The shield is easy to apply or remove by hand and once removed, leaves no sticky residue on the bike. If you want to protect your bike from numerous types of damage, BikeShield have got you covered.
BikeShield keeps your bike in mint condition by protecting it from scratches, grit and stones. It offers clear advantages over other products which aim to provide invisible protection for bike frames thanks a number of clever design features. Ultra-tough protection for bicycle frameEasy to apply or remove by hand and leaves no sticky residueInvisible on the bikeLong lasting and will not yellow with ageIncludes two cut to size rectangle shieldsOn the bike it is invisible and you can simply peel it off and your bike looks like new! This Tube Shield Protection is perfect for the larger tubes on your bike, such as the seat tube, down tube and top tube, protecting them from potential damage. The shield is ultra-tough, will not yellow with age and is long-lasting, giving your bike years of worry free protection. The shield is easy to apply or remove by hand and once removed, leaves no sticky residue on the bike. If you want to protect your bike from numerous types of damage, BikeShield have got you covered.
Sometimes it's the simplest ideas that are the best; RRP's Neoguard replaces that bit of inner tube you had cable-tied to the fork, providing maximum coverage for your eyes and face against mud flicked off the front wheel.Made from thick neoprene to allow for stretching and compression during suspension travel, it attaches to the fork crown and brace using the integrated velcro straps, making it easy to install and remove when required without risking damage to the fork. X-Small: 80-130mm TravelSmall: 130-160mm TravelMedium: 160-200mm TravelLarge: 200mm + Travel (Dual Crown)
The SQlab 710 Grips are designed and shaped to offer secure grip and comfort. The extra-large wing supports your wrist and evenly distributes pressure thanks to its very large contact area. This makes them perfect for comfort-orientated mountain bikes and sporty trekking bikes.Unique design offers maximum hand contact area for supreme grip and comfortRaised grip end picks up the side of the hand and supports it better than regular gripsHelps to relieve pressure on the ulnar nerve, the median nerve and the carpal tunnel passVarious rubber compounds ensure a perfect grip level and high comfort136mm long and lightweight (from just 165g - size S)
Tubular tyres can be a daunting, difficult and time-consuming proposition for a lot of riders. While clinchers are a comparative breeze to mount, tubulars require glue or less-effective taping in order to be safely mounted. Effetto Mariposa's Carogna Tubular Tape provides all the performance of glue, with the ease of tape.Extremely easy to use, making tubular tyres far quicker to fit safelyProvides excellent adhesion and is highly heat-resistant; perfect for road racingLeaves the rim ready for next gluing or taping when removed.Suitable for road or cyclocross use on carbon or aluminium rimsSize-specific for different rim widthsGluing tubular tyres and rims is both time-consuming and messy. With the need for the glue to set before mounting the tyre, realistically it can take days rather than minutes to safely mount them. This is where Effetto Mariposa's Carogna Tubular Tape provides a key advantage; it is incredibly easy and quick to use and offers incredibly secure adhesion to rival gluing. It also offers excellent heat-resistance, making it perfect for high-performance use where rim temperatures can soar. The tape also leaves no residue, so once removed the rim needs no additional cleaning before it is next glued or more tape is re-applied.Not only is Carogna Tubular Tape extremely easy to use, it is also suitable for both road and cyclocross use, with it being rated to extremely high and low-temperature use. Rim material is not a problem either, as the Carogna Tape is suitable for use with both aluminium and carbon rims. The tape comes in different sizes to suit different rim widths, with the Small width suitable for rims up to 20mm wide, Small/Medium suitable for 21-24mm rims and Medium suitable for the latest modern rims between 25 and 28mm wide. Easy to use and incredibly secure, no longer should you fear tubular tyres thanks to Effetto Mariposa's Carogna Tubular Tape.
Not all modern mountain bike rims are tubeless compatible, so if you want to take the tubeless plunge but don't want to invest in new wheels, the Effetto Mariposa Caffelatex Tubeless strip is the answer.Lightweight, puncture resistant transparent rim strip makes tubeless conversion easyFit strip and valves to wheels, add sealant to tubeless or tubeless-ready tyres, inflate and go for a rideLong lasting construction can be moved from wheel to wheelSold as a kit including two rim strips and two 40mm tubeless valvesWhile more and more rims are designed from the outset to be used with tubeless and tubeless-ready tyres, there are still a huge number only designed to take tubes. Rather than investing in a new set of wheels, the Effetto Mariposa Caffelatex Rim Strip allows you to convert your regular inner-tube only wheels to tubeless-ready, so you can enjoy puncture-free riding.When using the Caffelatex Rim Strip, you can remove your current rim tape or cloth and install the strip. This is the first step in setting your wheels and tyres up tubeless. The strip helps to make the rim as air tight as possible. When combined with the tyre sealant, this keeps the tyres inflated and more resistant to punctures. The width of the tape varies, so you must select the right size for your rim. The Small Kit suits rims with an external section of 20-24mm, Medium suits 25-29mm and Large suits 30-34mm wide rims. Once the strip and valves are installed you can install your tubeless or tubeless-ready tyres, add your sealant of choice, inflate the tyres and you're good to go! You can finally kiss punctures goodbye. The strips and valves are incredibly durable, so you can easily swap them between wheels if you need to. Thanks to the Effetto Mariposa Caffelatex Rim Strip, you no longer need to have a set of expensive tubeless or tubeless-ready wheels to enjoy the benefits of such a setup.
Not all modern mountain bike rims are tubeless compatible, so if you want to take the tubeless plunge but don't want to invest in new wheels, the Effetto Mariposa Caffelatex Tubeless strip is the answer.Lightweight, puncture resistant transparent rim strip makes tubeless conversion easyFit strip and valves to wheels, add sealant to tubeless or tubeless-ready tyres, inflate and go for a rideLong lasting construction can be moved from wheel to wheelSold as a kit including two rim strips and two 40mm tubeless valvesWhile more and more rims are designed from the outset to be used with tubeless and tubeless-ready tyres, there are still a huge number only designed to take tubes. Rather than investing in a new set of wheels, the Effetto Mariposa Caffelatex Rim Strip allows you to convert your regular inner-tube only wheels to tubeless-ready, so you can enjoy puncture-free riding.When using the Caffelatex Rim Strip, you can remove your current rim tape or cloth and install the strip. This is the first step in setting your wheels and tyres up tubeless. The strip helps to make the rim as air tight as possible. When combined with the tyre sealant, this keeps the tyres inflated and more resistant to punctures. The width of the tape varies, so you must select the right size for your rim. The Small Kit suits rims with an external section of 20-24mm, Medium suits 25-29mm and Large suits 30-34mm wide rims. Once the strip and valves are installed you can install your tubeless or tubeless-ready tyres, add your sealant of choice, inflate the tyres and you're good to go! You can finally kiss punctures goodbye. The strips and valves are incredibly durable, so you can easily swap them between wheels if you need to. Thanks to the Effetto Mariposa Caffelatex Rim Strip, you no longer need to have a set of expensive tubeless or tubeless-ready wheels to enjoy the benefits of such a setup.