Perfect for anyone working on a bicycle, motorcycle or car, the Mechanics Gloves are designed to offer the hand total 360° comfort and protection against most cuts and scratches with minimal impact to dexterity. Gone are the days of taking the skin off your knuckles when removing a difficult to remove bolt or pedal!Key Features:Total 360° protection from most cuts and scratches.,Latex free.,Polyurethane palm coating provides excellent grip whilst preserving dexterity.,Ultra-lightweight and available in five different sizes.,Machine washable..
Orange Seal is the next generation of tyre sealant. Using premium latex and Nanites , Orange Seal coats the entire tyre from bead-to-bead to ensure complete protection. The unique Nanites enable Orange Seal to quickly and permanently seal punctures and sidewall slices far bigger than other sealants. The premium latex is long lasting and works effectively at extreme temperatures down to -11 degree Celsius and extreme altitude. Orange Seal lasts up to 25% longer, and doesn t create those annoying latex balls should the sealant dry out. Once injected into the tubes, installed and inflated, your tires should hold air longer which means you don t need to pump them up every time you ride.Seals Punctures up to 6mmSeals Slices up to 19mmSeals Tyres with Porous SidewallsLast on Average 30-45 Days Between Top UpsRoad Tyres: 1-2oz per TyreMTB: 26" or 27.5 3oz per Tyre / 29" 4oz per TyreFat Bike: 6-8oz per TyreNon Corrosive FormulaAlso Great for Inner Tubes
Orange Seal Endurance Sealant has been formulated to maximize longevity, lasting up to 120 days between top-ups and performing down to -23 degrees Celsius. Endurance sealant will instantly seal punctures up to 3mm and slices up to 12mm. Orange Seal is the next generation of tyre sealant. Using premium latex and Nanites , Orange Seal coats the entire tyre from bead-to-bead to ensure complete protection. The unique Nanites enable Orange Seal to quickly and permanently seal punctures and sidewall slices far bigger than other sealants. Orange Seal doesn t create those annoying latex balls should the sealant dry out. Once injected into the tubes, installed and inflated, your tires should hold air longer which means you don t need to pump them up every time you ride.Seals Punctures up to 3mmSeals Slices up to 12mmSeals Tyres with Porous SidewallsLast on Average 60 - 120 Days Between Top UpsRoad Tyres: 1-2oz per TyreMTB: 26" or 27.5 3oz per Tyre / 29" 4oz per TyreFat Bike: 6-8oz per TyreNon Corrosive FormulaAlso Great for Inner Tubes
A full-featured bicycle workstand designed and built for the home mechanic The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment Featuring 18 (460mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability The PCS-10.3 is able to hold up to 80lbs. (36kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair The new PCS-10.3 features: Cam-actuated micro-adjustable clamp fits 7/8 to 3 (22mm - 76mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts Narrow clamping jaws (2.7 /70mm) fit into tight areas or on short seat posts Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage Durable, textured powder coat finish Integrated height-adjustable parts tray Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) Maximum weight capacity*: 80lbs. (36kg) Height adjustable from 39 to 57 (990mm - 1450mm) using convenient quick-release lever Base when open forms a triangle of 36 x 36 x 48 (920mm x 920mm x 1210mm) Folds down to 45 x 14.5 (1140mm x 370mm) Weight: 16lbs. (7.2kg) Note: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the leg.
Create your own workshop. A bench mount version of the popular PCS-10 Home Mechanic Repair Stand with a quick adjusting cam-type clamp and durable powder coat finish. Mounts to any flat horizontal surface. Key Features: A bench mount version of their popular PCS-10 Home Mechanic Repair Stand. Features a quick adjusting cam-type clamp that fits tubes up to 76 mm (3 inches) and rotates 360 degrees for easy access to any part of the bike. Clamping pressure is fully adjustable to prevent damage to thin walled tubes. Durable powder coat finish. Mounts to any flat horizontal surface (mounting bolts not included).
The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair It features 18 (460mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability The PCS-9.3 is able to hold up to 80lbs. (36kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion The PCS-9.3 is the perfect way to upgrade your home shop ! Product Features: Fully adjustable clamp fits 7/8 to 3 (22mm - 76mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts Narrow clamping jaws (2.7 /70mm) fit into tight areas or on short seat posts Durable textured powder coat finish Maximum weight capacity: 80lbs. (36kg) Height adjustable from 39 to 57 (990mm - 1450mm) Base when open forms a triangle of 36 x 36 x 48 (920mm x 920mm x 1210mm) Folds down to 44 x 14.5 (1140mm x 370mm) Weight: 16lbs. (7.2kg) QK2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray Note: The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs Suitable for all bike, including e-bikes, including the maximum weight limit.
The Park Tool PW5 Home Mechanic Pedal Wrench is designed for the do-it-yourself mechanic or rider. The PW5 is perfect to take along or for the home workshop. Although economically priced, this 15mm pedal wrench, like all Park Tool products is built to last. Made from heat-treated spring steel and vinyl dipped for comfort, the PW-5 is 11-½ (29 cm) long.
Durability is the key to a good floor pump, after all it is going to take quite a beating in its lifetime. Equally at home in the garage, work shop or track side the Park Tool PFP8 is the must have for the keen rider. The sleek and stylish steel barrel not only improves efficiency at high pressures, it can also take the knocks and scrapes when you inevitably knock it over/throw it in the van/drop your bike on it. Plus with a stable steel base with large foot pads you can be sure to get good purchase when getting air in your tyres regardless of the ground underfoot.Durable Steel BarrelComposite Head With Thumb Lock Fits Presta, Schrader and DunlopComfortable Composite Handle
Introducing the Park Tool 10.3 Deluxe Repair Stand; a full-featured bicycle work stand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing.Cam-actuated micro-adjustable clamp fits 7/8" to 3" (22 mm 76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper postsNarrow clamping jaws (2.7"/70 mm) fit into tight areas or on short seat postsRubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storageDurable, textured powder coat finishIntegrated height-adjustable parts trayHeight adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately)Maximum weight capacity*: 36 kg Height adjustable from 39" to 57" (990 mm 1450 mm) using convenient quick-release leverBase when open forms a triangle of 36" x 36" x 48" (920 mm x 920 mm x 1210 mm)Folds down to 45" x 14.5" (1140 mm x 370 mm)Weight: 7.2kg (16lbs)*Please Note: The maximum weight capacity of the PCS-10.3 assumes the weight is centred below the clamp and between the legs.The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes*.The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair.
The Park Tool TS8 Home Mechanic Wheel Truing Stand is designed especially for the home mechanic. The TS-8 allows accurate wheel truing at an economical price. Accepts wheels from 16 to 29 , with or without the tire mounted. Innovative sliding dropout allows quick wheel installation, no matter what the hub width (up to 170mm). Dishing (centring) is performed by simply flipping the wheel in the stand. Constructed from heavy gauge steel to resist flexing. the TS-8 can be used freestanding or bolted to a bench for extra stability.
The Park Tool PCS-9.3 is a basic folding bicycle work stand designed and built for the home mechanic and provides a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. Features 18" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing.Fully adjustable clamp fits 7/8" to 3" (22 mm 76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper postsNarrow clamping jaws (2.7"/70 mm) fit into tight areas or on short seat postsDurable textured powder coat finishMaximum weight capacity: 80 lbs. (36 kg)Height adjustable from 39" to 57" (990 mm 1450 mm)Base when open forms a triangle of 36" x 36" x 48" (920 mm x 920 mm x 1210 mm)Folds down to 44" x 14.5" (1140 mm x 370 mm)Weight: 16 lbs. (7.2 kg)#2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray*NOTE: The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability. The PCS-9.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-9.3 is the perfect way to upgrade your home shop.
The Park Tool TS7M Home Mechanic Wheel Truing Stand is constructed from heavy gauge steel and allows for extremely accurate and reliable wheel truing at an economical price. The TS7M is suitable for wheels up to 180 mm wide and 740 mm in diameter. This wheel truing stand is also ideal for motorcycle wheels.