Exposure Fast Charger for Six Pack and MaXx-DThe Fast Charger allows you to directly charge your Exposure bike light from a mains supply for quick and easy charging capability.FeaturesCompatible with Six Pack and MaXx-DAlso works with most Exposure lights 2013 - 2016Buy Exposure Accessories from Chain Reaction Cycles. Ride. Eat. Sleep. Repeat.
Exposure Beacon diffuser capOpaque injection moulded silicon diffuser cap.• Beacon 1 fits Joystick/Spark/Flash/Flare/RedEye (8g)• Beacon 2 fits Diablo (16g)• Beacon 3 fits Race/Strada/Toro (22g)• Beacon 4 fits MaXx-D (26g)Buy Exposure Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Exposure MaXx-D MK14 Front LightStay illuminated when cycling after dark or in low light, thanks to this powerful Front Bike Light from Exposure. Featuring Exposure's Reflex+ technology, this light has a dazzling maximum output of 4400 lumens, so you know you'll be kept seen and safe when cycling. Lighting up your way, it is set within a durable anodised aluminium casing and has a waterproof rating of IP65, making it ideal for riding in all weather conditions.Optimised for Off-Road RidingRipping through the single track or trail the combination of 3 spot lenses to launch light far down the track, a spread beam to highlight the trail edge and REFEX++ to Automatically provide the perfect output for any change in speed or terrain the Maxx-D is backed up with 4400 measured Lumens to be at one with the trial.Powerful Front Cycle LightOn the rear of the light, there is an in-built OLED status display that shows all the key information you require, Programme and mode information plus battery time remaining in hours and minutes. Intelligent Thermal Management controls the temperature of the LEDs ensuring your light will never overheat and remain as efficient as possible, connect to the SYNC Bluetooth app and this will offer you full control of the light which is useful when using more than one compatible SYNC light.Reflex++ Automatic Light AdjustReflex automatically adjusts the light to provide boosted output when riding hard and fast then intuitively dimming for the slower sections such as climbs. This is all to optimise battery capacity, to provide extra light when needed and save it when not required.Reflex achieves this by using data from 3D digital accelerometers including gyroscopes and thermistors. It continually analyses the data to make seamless adjustments to benefit the rider, probably better than the rider can. It is a form of artificial intelligence. The selected run time will be achieved by averaging the output over the period.OLED Status Display (OSD)An LED display panel that gives clear information on which mode the light is in, runtime remaining in hours and minutes, percentage charged and feedback information during OMS. Patent Protected.Intelligent Thermal Management (ITM)Patented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficiently as possible to maximise output and battery capacity.Smart Port+Smart Port+ enables the charge port to accept auxiliary accessories such as rear lights, remote switches, and Support Cells and use your light as a power bank to charge USB devices.Optimum Mode SelectorVarious programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast.Fuel GaugeUsing a traffic light system remaining runtime is easily monitored at a glance so you're not caught out. The colour feedback is also used for mode selection, before defaulting back to the runtime.Features: Max Output: 4400 Max Output with Reflex: 2700 Min Burn Time (hrs): 2 Max Burn Time (hrs): 36 Handlebar Mounted: Yes Stem Mounted: Optional Extra Helmet Mounted: Optional Extra Reflex Technology: Yes OLED Status Display: Yes Smart Port Technology: Yes Cable Free Design: Yes Intelligent Thermal Management: Yes Optimum Mode Selector: Yes Fuel Gauge: Yes LEDs: 4 XPL2(W3) Internal Li-Ion Battery: Yes Support Cell: Optional Extra Charger: 5A Charge Time (hrs): 6 Smart Charger: Yes Weight (g): 310 Length (mm): 115 Head (mm): 54 Back (mm): 50 Rating: IP65 Battery Capacity (mAh): 13600Buy Exposure Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ripping through the single track or trail the combination of 3 spot lens to launch light far down the track, a spread beam to highlight the trail edge and REFEX ++ to Automatically provide the perfect output for any change is speed or terrain the Maxx-D is backed up with 4400 measured Lumens to be at one with the trial.Key Features:Output:,Reflex 4400 lumens,2700 lumens.Weight: 310g,Runtime:: 2-36 hours.REFLEX++Reflex automatically adjusts the light to provide boosted output when riding hard and fast then intuitively dimming for the slower sections such as climbs. This is all to optimise battery capacity, to provide extra light when needed and save it when not required.Reflex achieves this by using data from 3D digital accelerometers including gyroscope and thermistors. It continually analyses the data to make seamless adjustments to benefit the rider, probably better than the rider can. It is a form of artificial intelligence. The selected run time will be achieved by averaging the output over the period.ITMPatented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficient as possible to maximise output and battery capacity. Once cooled the output is automatically restored.OSDAn LED display panel that gives clear information on which mode the light is in, runtime remaining in hours and minutes, percentage charged and feedback information during OMS. Patent Protected.OMSVarious programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast.
MaXx-D Sync Mk4Maxx-D SYNC has a smoother App to allow the light to be, through a smart phone, programmed to tailor the light output or burn time to fit to the needs of the ride ahead, mode changeable via Bluetooth remote. 3 LEDs with spot Lens and 1 with spread combine to shine far down the track and highlight the trail edge at the same time. Backed with 4400 of measured Lumens through REFLEXX++ to automatically provide the right light when required.Key Features:Output:,Reflex 4400 lumens,2700 lumens.Weight: 310g,Runtime:: 2-36 hours.REFLEX++Reflex automatically adjusts the light to provide boosted output when riding hard and fast then intuitively dimming for the slower sections such as climbs. This is all to optimise battery capacity, to provide extra light when needed and save it when not required.Reflex achieves this by using data from 3D digital accelerometers including gyroscope and thermistors. It continually analyses the data to make seamless adjustments to benefit the rider, probably better than the rider can. It is a form of artificial intelligence. The selected run time will be achieved by averaging the output over the period.Diablo Sync Mk4The Diablo SYNC gives you the widespread, high-powered beam of a Diablo with SYNC Bluetooth connectivity for wireless mode changing and customisable runtimes via a smart phone and an updated app to get exactly what you need out it to keep you riding on the edge. Also available with in a pack with an additional Support Cell for longer runtimes.Key Features:Output: 1900 lumens,Weight: 120g,Runtime: 2-36 Hours.SYNC SYNC allows you to control the light with a remote switch and to make custom programs in the Exposure SYNC App, additionally both helmet and handlebar lights can be simultaneously controlled with a single remote via Bluetooth connectivity. App is available in both iOS and Android platforms.MaXx-D Sync Mk4 and Diablo Sync Mk4ITMPatented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficient as possible to maximise output and battery capacity. Once cooled the output is automatically restored.OSDAn LED display panel that gives clear information on which mode the light is in, runtime remaining in hours and minutes, percentage charged and feedback information during OMS. Patent Protected.OMSVarious programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast.
Maxx-D SYNC has a smoother App to allow the light to be, through a smart phone, programmed to tailor the light output or burn time to fit to the needs of the ride ahead, mode changeable via Bluetooth remote. 3 LEDs with spot Lens and 1 with spread combine to shine far down the track and highlight the trail edge at the same time. Backed with 4400 of measured Lumens through REFLEXX++ to automatically provide the right light when required.Key Features:Output:,Reflex 4400 lumens,2700 lumens.Weight: 310g,Runtime:: 2-36 hours.REFLEX++Reflex automatically adjusts the light to provide boosted output when riding hard and fast then intuitively dimming for the slower sections such as climbs. This is all to optimise battery capacity, to provide extra light when needed and save it when not required.Reflex achieves this by using data from 3D digital accelerometers including gyroscope and thermistors. It continually analyses the data to make seamless adjustments to benefit the rider, probably better than the rider can. It is a form of artificial intelligence. The selected run time will be achieved by averaging the output over the period.SYNCSYNC allows you to control the light with a remote switch and to make custom programs in the Exposure SYNC App, additionally both helmet and handlebar lights can be simultaneously controlled with a single remote via Bluetooth connectivity. App is available in both iOS and Android platforms.ITMPatented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficient as possible to maximise output and battery capacity. Once cooled the output is automatically restored.OSDAn LED display panel that gives clear information on which mode the light is in, runtime remaining in hours and minutes, percentage charged and feedback information during OMS. Patent Protected.OMSVarious programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast.
The MaXx-D Mk14 from Exposure Lights features a whopping 4400 lumen beam that will allow you to shred your favourite trails all the way through the autumn and winter months. Ripping through the single track or trail the combination of 3 spot lens to launch light far down the track, a spread beam to highlight the trail edge and REFEX ++ to Automatically provide the perfect output for any change is speed or terrain the Maxx-D is backed up with 4400 measured Lumens to be at one with the trial.Reflex+ Technology - Reflex automatically adjusts the light to provide boosted output when riding hard and fast then intuitively dimming for the slower sections such as climbs. This is all to optimise battery capacity, to provide extra light when needed and save it when not required.Reflex achieves this by using data from 3D digital accelerometers including gyroscope and thermistors. It continually analyses the data to make seamless adjustments to benefit the rider, probably better than the rider can. In reality it is a form of artificial intelligence. The selected run time will be achieved by averaging the output over the period.Smart Port+ Technology - Smart Port+ enables the charge port to accept auxiliary accessories such as rear lights, remote switches, Support Cells and use your light as a power bank to charge USB devices.OLED Status Display - OSD - An LED display panel that gives clear information on which mode the light is in, runtime remaining in hours and minutes, percentage charged and feedback information during OMS. Patent Protected.Optimised Mode Selector - Various programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast.Intelligent Thermal Management - Patented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficient as possible to maximise output and battery capacity. Once the light has cooled, the power is automatically restored.In the box: MaXx-D MK14 GMB, QR Handlebar Bracket (31.8mm - 35.0mm), Fast Charger, QS Guide.Specification:LEDs: 4 x White XPL2(W3)IP Rating: IP65Max Lumens: 2700 (Reflex 4400)Battery: 13,600 mAh Li-IonRuntime: 2 - 36 HoursCharging Time: 6 HoursWeight: 310gMaterial: Anodised 6063 AluminiumLength: 115mmHead Diameter: 54mm
The Maxx-D Sync from Exposure Lights has a smoother App to allow the light to be, through a smart phone, programmed to tailor the light output or burn time to fit to the needs of the ride ahead, mode changeable via Bluetooth remote. 3 LEDs with spot Lens and 1 with spread combine to shine far down the track and highlight the trail edge at the same time. Backed with 4400 of measured Lumens through REFLEXX++ to automatically provide the right light when required.Reflex+ Technology - Reflex automatically adjusts the light to provide boosted output when riding hard and fast then intuitively dimming for the slower sections such as climbs. This is all to optimise battery capacity, to provide extra light when needed and save it when not required.Reflex achieves this by using data from 3D digital accelerometers including gyroscope and thermistors. It continually analyses the data to make seamless adjustments to benefit the rider, probably better than the rider can. In reality it is a form of artificial intelligence. The selected run time will be achieved by averaging the output over the period.Sync - Sync allows you to control the light with a remote switch and to make custom programs in the Exposure SYNC App, additionally both helmet and handlebar lights can be simultaneously controlled with a single remote via Bluetooth connectivity. App is available in both iOS and Android platforms.Smart Port+ Technology - Smart Port+ enables the charge port to accept auxiliary accessories such as rear lights, remote switches, Support Cells and use your light as a power bank to charge USB devices.OLED Status Display - OSD - An LED display panel that gives clear information on which mode the light is in, runtime remaining in hours and minutes, percentage charged and feedback information during OMS. Patent Protected.Optimised Mode Selector - Various programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast.Intelligent Thermal Management - Patented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficient as possible to maximise output and battery capacity. Once the light has cooled, the power is automatically restored.In the box: MaXx-D SYNC MK4, SYNC Remote, QR Handlebar Bracket (31.8mm - 35.0mm), Fast Charger, QS Guide.Specification:LEDs: 4 x White XPL2(W3)IP Rating: IP65Max Lumens: 2700 (Reflex 4400)Battery: 13,600 mAh Li-IonRuntime: 2 - 36 HoursCharging Time: 6 HoursWeight: 310gMaterial: Anodised 6063 AluminiumLength: 115mmHead Diameter: 54mm
An open and aggressive tread design gives the High Roller II excellent soil penetration and mud-clearing ability. A square profile provides a solid, consistent feel across the knobs. Modified knobs on the shoulder and center improve braking performance and traction on hard surfaces. An excellent choice for technical, freeride terrain. Open tread design Improved braking and traction Specification Conditions: Loose Over Hard, Loose, Medium, Wet Cornering Control: 3 Rolling Efficiency: 2 TPI: 120 Bead: Foldable Ply Construction: Single Compound: 3C Maxx Terra Max PSI: 60 Tech: Tubeless Ready, Double Down Technology 3C Maxx Terra: An intermediate compound configuration used in select mountain tyres. 3C Maxx Terra is softer and offers more traction than 3C Maxx Speed, yet provides better treadwear and less rolling resistance than Maxx Grip. Tubeless Ready: Tubeless tyres provide the rider with many benefits: the ability to run lower air pressures, which improves traction; lower rolling resistance when compared to a tube-type tyre; and less chance of flatting since there is no tube. Maxxis Tubeless Ready (TR) tyres provide the benefits of a UST tubeless tyre without the weight penalty. Our TR tyres use a standard casing and require the use of a liquid sealant in order to make them airtight Double Down: With dual-ply 120 TPI casing and a butyl insert, Maxxis’ Double-Down technology is ideal for enduro-style rides. 2.50 widths are Wide Trail (WT) version, designed specifically for 30-35mm rims and feature a revised tread block arrangement to maintain ideal knob positioning
Our most popular training tire, modernized with tubeless technology and higher volumes for even more reliability and comfort. The familiar diamond tread pattern keeps things rolling smoothly even as the pavement crumbles into gravel and hardpack dirt. Diamond-knurled slick design MaxxShield bead-to-bead protection Dual compound rubber Specification Conditions: Hardpack Cornering Control: 1 2 3 4 Rolling Efficiency: 1 2 3 4 TPI: 60 Bead: Foldable Ply Construction: Single Compound: Dual Max PSI: 60-75 Tech: Tubeless Ready, MaxxShield Technology Tubeless Ready: Tubeless tyres provide the rider with many benefits: the ability to run lower air pressures, which improves traction; lower rolling resistance when compared to a tube-type tyre; and less chance of flatting since there is no tube. Maxxis Tubeless Ready (TR) tyres provide the benefits of a UST tubeless tyre without the weight penalty. Our TR tyres use a standard casing and require the use of a liquid sealant in order to make them airtight MaxxShield: MaxxShield represents the ultimate in flat protection. We begin with our SilkShield bead to bead protection and add our K2 (Kevlar® Composite) layer for unparalleled durability.
The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs off er enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding. Specification onditions: Loose over Hard, Loose, Medium, Wet ornering Control: 1 2 3 4 olling Efficiency: 1 2 3 4 PI: 60 ead: Foldable ly Construction: Single ompound: Dual ax PSI: 60 ech: Tubeless Ready, EXO Tubeless Ready: Tubeless tyres provide the rider with many benefits: the ability to run lower air pressures, which improves traction; lower rolling resistance when compared to a tube-type tyre; and less chance of flatting since there is no tube. Maxxis Tubeless Ready (TR) tyres provide the benefits of a UST tubeless tyre without the weight penalty. Our TR tyres use a standard casing and require the use of a liquid sealant in order to make them airtight.EXO: An extremely cut-resistant and abrasion-resistant material added to the sidewalls of select mountain tyres. This densely woven fabric is also lightweight and highly flexible, ensuring that the performance of the tyre remains unaffected. Choose EXO Protection for exceptionally rocky, treacherous trails where the chance of sidewall cuts and abrasions is high.
An open and aggressive tread design gives the High Roller II excellent soil penetration and mud-clearing ability. A square profile provides a solid, consistent feel across the knobs. Modified knobs on the shoulder and center improve braking performance and traction on hard surfaces. An excellent choice for technical, freeride terrain. Feature: Open tread design Improved braking and traction Specification: Conditions: Loose Over Hard, Loose, Medium, Wet Cornering Control: 1 2 3 4 Rolling Efficiency: 1 2 3 4 TPI: 60 Bead: Foldable Ply Construction: Single Compound: Dual Max PSI: 60 Tech: Tubeless Ready, EXO Technology: Tubeless Ready: Tubeless tyres provide the rider with many benefits: the ability to run lower air pressures, which improves traction; lower rolling resistance when compared to a tube-type tyre; and less chance of flatting since there is no tube. Maxxis Tubeless Ready (TR) tyres provide the benefits of a UST tubeless tyre without the weight penalty. Our TR tyres use a standard casing and require the use of a liquid sealant in order to make them airtight EXO: An extremely cut-resistant and abrasion-resistant material added to the sidewalls of select mountain tyres. This densely woven fabric is also lightweight and highly flexible, ensuring that the performance of the tyre remains unaffected. Choose EXO Protection for exceptionally rocky, treacherous trails where the chance of sidewall cuts and abrasions is high.