Zipp SL70 Aero Carbon HandlebarOffering a best-in-class fit, low weight and aerodynamic performance, this aero handlebar features a unidirectional carbon construction for smooth and dependable steering on your road bike. Zipp has also equipped this race-ready model with its renowned Rapid Route internal cable routing system. Rapid Route cable exits are conveniently positioned on this bar for easy installation of your brake cables, so you can enjoy straightforward integration with your time trial (TT) or triathlon bike. Carbon Wing-Shaped Aero BarWith its wing-shaped bar top, the SL-70 Aero features Zipp's latest bar refinements while building on the trend-setting aero legacy of the VukaSprint. The wing-shaped top was designed using Computational Fluid Dynamics (CFD). The difference of that design is real, saving 6.4 watts over a round-tube section bar top. Beyond aero performance, the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The revised 10-degree ramp angle to the brake hoods eliminated the need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in drops. The SL-70 Aero is not compatible with internal routing of DI2 wires, or the bar end junction.Features:Material: Unidirectional CarbonUse: RoadHandlebar Clamp Diameter: 31.8mmReach: 70mmDrop: 128mmRamp Angle: 10°Drop Outsweep: 4°Cable Routing: RapidRoute internal cable routingClip Compatible: NoUCI Legal: YesManufacturer's Part Numbers: 38cm: ZHB8203000; 40cm: ZHB8203001; 42cm: ZHB8203002 and 44cm: ZHB8203003Weight: 240g (42cm version)Technologies:Rapid Route: Zipp Rapid Routing cable exits are positioned for easy installation of brake cables, making a TT or tri bike builder's job so much easier.Buy Zipp Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp Service Course SL80 HandlebarThis road bike drop handlebar is equipped with a matte nano-blast aluminium construction, which makes it incredibly durable as you clock up the miles on the road. Its 80mm reach and 125mm drop combination is designed to fit a large number of riders and provide more efficient positioning on the bar tops, brake hoods or down in the drops. Comfortable Road Bike Drop BarDesigned for a comfortable and controlled experience, this drop bar allows for a neutral wrist position on the drops and a flat brake-hood transition. This minimises the need for up-rotated bars. Drops are angled outward by 4 degrees, reducing wrist strain. Named after its 80mm reach to bring the hoods and control levers back where you want them. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. The SL-80's rounded bar top is also clip-on compatible. Features: Material: AL7050 Aluminium Finish: Matte Use: Road Diameter: 31.8mm Ramp Angle: 7 degrees Outsweep: 4 degrees Drop: 125mm Reach: 80mmClip-on Compatible: YesLength: Multiple options availableManufacturer's Part Numbers: ZHB8198000 Black Matte 36cm ZHB8198001 Black Matte 38cm ZHB8198002 Black Matte 40cm ZHB8198003 Black Matte 42cm ZHB8198004 Black Matte 44cm ZHB8198005 Black Matte 46cmBuy Zipp Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp Service Course SL80 Ergo HandlebarThis drop handlebar features a hard-wearing aluminium construction, which allows it to handle all the abuse that's associated with training and competing on your road bike. It's equipped with 80mm of reach and a 125mm drop, making it ideal for riders who want to benefit from a medium reach with a shallow drop. As a result of its design, you can reach down to the drops rather than into the drops. Lightweight and Comfortable Road Bike Drop BarWith a flattened top and 3° backsweep, this handlebar provides a neutral wrist position on the tops. Its 7° ramp angle also delivers a flat transition to the hoods and a 4° outsweep at the drops. In addition to the ergonomic benefits, the Service Course SL 80 Ergo is Zipp's first ergo bar to be clip-on compatible, so riders can enjoy an even greater choice of positions than before. Weighing only 275g for the 42cm-wide bar, this is a great choice of upgrade for road riders who want increased stiffness and comfort without adding any unnecessary weight to their ride.Features: Material: AL7050 Aluminium Finish: Matte Use: Road Diameter: 31.8mm Ramp Angle: 7 degrees Outsweep: 4 degrees Drop: 125mm Reach: 80mmClip-on Compatible: 40, 42, 44cm sizes onlyDi2 RS910 junction compatibleManufacturer's Part Numbers: ZHB8199000 Black Matte 38cm ZHB8199001 Black Matte 40cm ZHB8199002 Black Matte 42cm ZHB8199003 Black Matte 44cmBuy Zipp Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp Service Course SL70 Ergo HandlebarThis race-ready drop bar features a tough 7050 aluminium construction, which makes it more than capable of handling all the demands associated with long days on the road. Designed with feedback from Zipp's pro riders and bike fitters, this bar features the same compact reach and drop dimensions as the Service Course SL-70 model with a flattened top section for a natural ergonomic grip on the bar tops. Comfortable and Compact Road Drop BarThe SL-70 Ergo's specially tuned drop shape creates comfortable hand positions with short reach to control levers vital for race situations. The bar's 70mm reach is the shortest of Zipp's updated Service Course line-up. Its 128mm drop help puts the rider low and in control without compromising comfort. Whether it's a rider with smaller hands or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclist into their optimal position.Features:Material: 7050 AluminiumUse: RoadHandlebar Clamp Diameter: 31.8mmReach: 70mmDrop: 128mmRamp Angle: 10°Outsweep: 4°Manufacturer's Part Numbers: 38cm: ZHB8200000; 40cm: ZHB8200001; 42cm: ZHB8200002 and 44cm: ZHB8200003Weight: 260g (44cm version)Buy Zipp Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp Service Course SL70 HandlebarThis road bike drop handlebar features a durable aluminium construction, which allows it to handle the increased pressure from training and competing. Classed as the bike fitter's go-to bar, it has a short reach to the hoods that allows for a proper fit without compromising stem length and steering control. With its revised ramp angle, this model also ensures that road riders benefit from a proper fit on even the most challenging setups. Road Bike Drop Bar with Short ReachWith 70mm of reach and a 128mm drop, this version the shortest of the Service Course series. This makes it a great choice of upgrade for riders with a shorter torso or a bigger rider getting aero by pairing this bar with a long stem. The SL-70's flattened top also provides a better fit to the hand and is clip-on bar compatible.Features: Material: AL7050 Aluminium Finish: Matte Use: Road Diameter: 31.8mm Ramp Angle: 10 degrees Outsweep: 4 degrees Drop: 128mm Reach: 70mmClip-on Compatible: YesLength: Multiple options availableManufacturer's Part Numbers: ZHB8201002 Black Matte 40cm ZHB8201003 Black Matte 42cm ZHB8201004 Black Matte 44cm ZHB8201000 Black Matte 36cm ZHB8201001 Black Matte 38cmBuy Zipp Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp’s SL Speed stem represents the essence of carbon componentry. It’s stiff, secure and light weight with a sleek design that compliments any bike. It’s a perfect addition to a mountain climber’s favorite feather-light road bike, but it’s tough enough to tackle gravel and cyclocross. Designed using SRAM Exogram™ technology, found in SRAM RED cranks, the new SL Speed Stem weighs just 123g (100mm) while exceeding our stiffness-to-weight standards. The SL Speed is available in six sizes ranging from 70 to 120mm to meet any rider’s fit needs. Includes stiff aluminum faceplate and titanium hardware Torx® T25 heads for precise torque readings and ease of adjustment. Features Updated distinctive Zipp cosmetics Designed using SRAM Exogram™ technology New SL Speed Stem weighs just 123g (100mm) ±6° carbon stem Secure with four bolt faceplace using Torx© T25 bolt heads Matte Black finish Lifetime warranty Zipp Quickview integrated mount available separately
Zipp Service Course SL 80 Ergo handlebar is all about making you faster in style and comfort. The bar offers an 80mm reach and 125mm drop, perfect for a rider looking for a medium reach and shallow drop who likes reaching down to, rather than into, the drops. This bar has a flattened top and 3° backsweep for a neutral wrist position on the tops. The bars feature a 7° ramp angle for a flat transition to the hoods and a 4° outsweep at the drops. In addition to the ergonomic benefits, the Service Course SL 80 Ergo is our first ergo bar to be clip-on compatible. Made of 7050 aluminum, the Service Course SL 80 Ergo weighs 275g for a 42cm-wide bar. Light weight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. Features: Distinctive Zipp cosmetics 7050 aluminum for light weight and durability 80mm reach and 125mm drop for a medium-high position Flattened top shape with 3° backsweep for comfort Clip-on Compatible (40, 42, 44cm sizes only) Di2® RS910 junction compatible Matte Black nano blast aluminum ISO 4210 compliant. See Declaration of Conformity for details. Lifetime warranty
Zipp’s Service Course SL Stem, crafted from 7075 aluminum, features a shape that's strong and lightweight, resulting in a best-in-class 1.85 grams per newton meter of stiffness. That results in no-flex sprints and accelerations. To meet every rider's fit needs, the stem is available in ±6° and ±17° angles and seven lengths from 70 to 130mm as well as a 140 & 150mm lengths for the ±6° stem only. This stem is a favorite of Zipp ambassadors and pro athletes. Features: Distinctive Zipp cosmetics Wide range of sizes and angles. Service Course SL stem made for 1-1/8” steerer tube bikes. Matte Black nano blast aluminum Lifetime warranty Zipp Quickview integrated computer mount available separately Weight - 135g (based on 100mm)
Zipp’s Service Course SL Stem, crafted from 7075 aluminum, features a shape that's strong and lightweight, resulting in a best-in-class 1.85 grams per newton meter of stiffness. That results in no-flex sprints and accelerations. To meet every rider's fit needs, the stem is available in ±6° and ±17° angles and seven lengths from 70 to 130mm as well as a 140 & 150mm lengths for the ±6° stem only. This stem is a favorite of Zipp ambassadors and pro athletes. Features: Distinctive Zipp cosmetics Wide range of sizes and angles. Service Course SL stem made for 1-1/8” steerer tube bikes. Matte Black nano blast aluminum Lifetime warranty Zipp Quickview integrated computer mount available separately Weight - 135g (based on 100mm)
The new die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Classic White and Beyond Black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Think of them as fuel for your Firecrests. Sizes available for Zipp 202, 303, 404 and 808 model wheels. Zipp discs use 808-sized decals. Note Before applying the decals, make sure the rim surface is free of dirt and debris we recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.
The new die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Classic White and Beyond Black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Think of them as fuel for your Firecrests. Sizes available for Zipp 202, 303, 404 and 808 model wheels. Zipp discs use 808-sized decals. Note Before applying the decals, make sure the rim surface is free of dirt and debris we recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.
The Service Course SL-80 provides comfortable and efficient positions on the bar tops, brake hoods or down in the drops. The bar allows a neutral wrist position on the drops and a flat brake-hood transition. This minimizes the need for up-rotated bars. Drops are angled outward by 4 degrees, reducing wrist strain. Named after its 80mm reach to bring the hoods and control levers back where you want them. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. The SL-80’s rounded bar top is clip compatible. Forged from lightweight 7075 aluminum. Features: Distinctive Zipp cosmetics 7050 Aluminum 80mm reach/125mm drop designed to fit a large number of riders Clip on compatible Lifetime warranty