Lightweight racing hub with 6 pawl drive system.Smooth, quiet and reliable power transfer.The ultra-dependable drive system of this hub uses 6 reversed pawls, all independently sprung and featuring double tips, giving 12 engagement points on a 30 click Cr-Mo freehub driver.6D - Halo 6 Drive System:The ultra-dependable 6-Drive system: Smooth, quiet and reliable power transfer..6 reversed pawls, all independently sprung and featuring double tips, giving 12 point simultaneous engagement on a 30 click Cr-Mo drive ring powering the optional Cr-Mo or 7075chard alloy splined freehub body.This results in an extremely positive and reliable drive system.The uncluttered freehub that a reversed pawl system provides, allows a cartridge bearing to be used directly under the freehub drive ring (rather than an offset position that is commonly used in conventional pawl systems that cram the pawl mechanism into the relatively small diameter of the freehub itself.) The resultant reduction in offset torque transfer from the freehub reduces leverage effect on the axle and ultimately increases bearing durability. SpecificationsMaterial Forged and CNC machined,Drillings J-Bend, 24H (offset 16/8) or 32H (16/16),Bearings 2 x 6902, 2 x 15268,Axle 15mm alloy tube for 10mm QR,Spacing 130mm,Freehub Shimano/SRAM or Campag,Freehub Body 11 speed, Shimano or Campag,Drive System 6 Pawl, 30T engagement,Spoke Hole Circle Diameter (PCD) Left: 40mm, Right: 58mm,spoke hole size (diameter) 2.5mm,Centre to Flange Left: 41mm, Right: 15mm,OLD 130mm,Model Ref SM6S,Colour Black, Red or White with Red axle caps,Weight 275g.
True tracking, silky smooth, modern clean styled lightweight racing hub.Forged and CNC machined body.,Rigid, true tracking 15mm alloy tube axle.,Stable, wide spaced spoke flanges.,47mm mid height flanges.,Secure fitting, knurled end caps..20H or 24H,Black with Red axle caps.,White with Red axle caps.,Red with Red axle caps.,Weight: 99g.Hub Tech:Flange Diameter: 38mm,Center Left: 33mm,Center Right: 33mm.
A micro-sized tubeless tire repair and inflation kit featuring an advanced 2-in-1 CO2 injector head that repairs a puncture and inflates the tubeless tire in one step with massive air or can simply be used as a traditional CO2 inflator via the valve stem. The inflator head is compatible with both Presta and Schrader valves and the included mounting strap attaches to seatposts, saddle rails, or frame tubes and can carry one or two threaded 25g CO2 cartridges.
Mounts under Ninja water bottle cage with interchangeable Cage Mount or use alone with Frame Mount. This weatherproof tool box contains a 30 function tubeless tire repair mini tool for road or trailside repair and maintenance. * The chain tool is compatible with single and multi-speed chains up to 12 speed NOT including Campagnolo® hollow pin chains. . Tools • 2L / 2.5 / 3 / 4 / 5 / 6 / 8 mm Allen wrenches • 10 mm hex socket • T10 / T15 / T25 Torx® wrenches • 14G / 15G • Mavic M7 • Shimano® 4.5mm spoke wrenches • CrMo steel chain tool* • Chain hook • CrMo master link pliers • #2 Phillips / flat head screw drivers • Tire reamer plug insertion tool • Serrated knife / saw • Disc insertion spacer TOOL MATERIAL Chrome vanadium steel TOOL BODY MATERIAL Forged aluminum Mount Mount to Ninja Master+ series Cages with included Cage Mount Install on frame stem seatpost or water bottle boss with included Frame Mount and zip ties ADDED FEATURES Knife blade & plug insertion tool lock extendable for leverage secondary chain link fence chain pin breaker and master link storage compartment WEIGHT 169g / 5.96 oz (Mini PT30) 55 g / 1.94 oz (ToolBox)
Mounts under Ninja water bottle cage with interchangeable Cage Mount or use alone with Frame Mount. This weatherproof tool box contains a 11 function tubeless tire repair mini tool and PlugBox case with 5 pieces of 3.5mm x 5cm plugs for tire repairs and road or trail bike maintenance. Tools • 2 / 2.5 / 3 / 4 / 5 / 6 mm Allen wrenches • T25 Torx® wrenches • 1 hardened steel tire lever • Knife • Stainless steel 2-in-1 tire reamer / plug insertion tool TOOL MATERIAL Chrome vanadium steel TOOL BODY MATERIAL Forged aluminum Mount Mount to Ninja Master+ series Cages with included Cage Mount Install on frame stem seatpost or water bottle boss with included Frame Mount and zip ties WEIGHT 106 g / 3.74 oz (Tubi 11 Combo) 55 g / 1.94 oz (ToolBox)
An updated version of the original and best selling Park Master Link pliersMany non-Shimano derailleur chains use a master link that allows the chain to be installed and removed by handWhile this type of masterlink doesn't require a traditional chain tool over time dirt and corrosion can make it very difficult to separate by handMLP-1.2 Master Link Pliers have cleverly redesigned tips allowing them to be used to rejoin stiff or corroded master links as well as split themSimply insert the specially sized jaws into the masterlink and squeeze the handlesMade in the USA and covered by Park's legendary limited lifetime warranty
A set of four replacement chain tool pins and one ball bearing to make your CT-4 Master Chain Tool as good as new
The adjustability and strength of a Thomson seatpost, now in Titanium.Proven saddle clamps are paired with Titanium hardware. It has a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than this grip length.The Thomson seatpost has a clamp, head and upper tube are strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Infinite tilt adjustment minus 5° and plus 29°.Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails.The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.Key Features: 41mm seat rail grip length., Tilt adjustment between -5° and +29°., Low profile seat clamps., 27.2mm Diameter., Available in 350mm and 410mm lengths..
The Thomson Masterpiece Seatpost is not for everyone. Thomson wanted to create the best seatpost possible without regard to cost. The serious cyclist will want to own the Thomson Masterpiece Seatpost. Masterpiece posts weigh approximately 40 grams less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson Seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over; including the oval inner diameter. We are able to hold closer tolerances by machining than by extrusion alone. Machining all over an already beautiful design makes the Masterpiece Seatpost a work of art.The tube and head of the Thomson Masterpiece seatpost is integral-machined from one single piece of high strength 7000 series aluminum. The head is not pressed or bonded in. This allows for superior strength and minimum weight allowing higher strength at low weights. Natural ellipse bore inside tube for optimum strength to weight ratio.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components and sometimes pieces of the tube and head flying off in all directions. Every component of the Masterpiece seatpost is 100 percent American made. This includes all fasteners and forgings.
1-Finger HC,MT Trail Sport, MT6/7/8Pro- Aluminium Lever,SL Models- Carbolay® Lever,Reach Adjust,Material housing: Carbotecture® (Sl Models - Carbotecture SL®),MT6/7- Compatible with My2015,MT Trail Sport- Compatible with MY2017,MT8Pro/SL & Trail SL- Compatible with MY2019,Delivery: PU = 1 piece incl. sleeve nut and olive,.
Colour: Black,2 Finger lever blade,Reach Adjust,MT6,7,8 - MY2015,MT Sport - MY2019,MT6,7,8 - Incl. sleeve nut and olive,MT7,8 - Hose covers 0724699 are also required,.
Replacement 1/8'' master pin for the Shadow Interlock Supreme Chain.