Effetto Mariposa Caffelatex Tubeless Rim TapeDesigned to replace standard rim-tape, Caffélatex Tubeless Tape perfectly adapts to the internal rim profile and makes standard rims airtight by sealing the spoke holes. It allows tubeless conversions of most standard mountain bike wheels, using Tubeless or Tubeless-Ready tyres and Caffélatex sealant. Three different widths are available: S: for rims with external width between 20 and 24mm; M: for rims with external width between 25 and 29mm; L: for rims with external width between 30 and 34mm. Features: Made of polyester: The best material for technical tapes, with very high strength properties. Stable: It easily conforms to rim shapes and has low memory (it doesn’t ‘spring back’ once put down in the rim channel). Adhesive strength: The adhesive can stick to silicone-treated paper and is much more tolerant to less-than-perfect rim cleaning before tape application. Smaller core: 1 inch instead of 3 inch-diameter cores of most tapes, to save space and to make it easier to tension it while taping the rim (inserting the thumb inside the core, it happens very naturally). Sealed: to preserve the tape properties and to underline its “technical product” status, each tape is now contained in a re-sealable bag. Buy Effetto Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Effetto Mariposa Caffelatex Tubeless Rim TapeDesigned to replace standard rim-tape, Caffélatex Tubeless Tape perfectly adapts to the internal rim profile and makes standard rims airtight by sealing the spoke holes. It allows tubeless conversions of most standard mountain bike wheels, using Tubeless or Tubeless-Ready tyres and Caffélatex sealant. Three different widths are available: S: for rims with external width between 20 and 24mm; M: for rims with external width between 25 and 29mm; L: for rims with external width between 30 and 34mm. Features: Made of polyester: The best material for technical tapes, with very high strength properties. Stable: It easily conforms to rim shapes and has low memory (it doesn’t ‘spring back’ once put down in the rim channel). Adhesive strength: The adhesive can stick to silicone-treated paper and is much more tolerant to less-than-perfect rim cleaning before tape application. Smaller core: 1 inch instead of 3 inch-diameter cores of most tapes, to save space and to make it easier to tension it while taping the rim (inserting the thumb inside the core, it happens very naturally). Sealed: to preserve the tape properties and to underline its “technical product” status, each tape is now contained in a re-sealable bag. Buy Effetto Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Effetto Mariposa Caffelatex Tubeless Rim TapeDesigned to replace standard rim-tape, Caffélatex Tubeless Tape perfectly adapts to the internal rim profile and makes standard rims airtight by sealing the spoke holes. It allows tubeless conversions of most standard mountain bike wheels, using Tubeless or Tubeless-Ready tyres and Caffélatex sealant. Three different widths are available: S: for rims with external width between 20 and 24mm; M: for rims with external width between 25 and 29mm; L: for rims with external width between 30 and 34mm. Features: Made of polyester: The best material for technical tapes, with very high strength properties. Stable: It easily conforms to rim shapes and has low memory (it doesn’t ‘spring back’ once put down in the rim channel). Adhesive strength: The adhesive can stick to silicone-treated paper and is much more tolerant to less-than-perfect rim cleaning before tape application. Smaller core: 1 inch instead of 3 inch-diameter cores of most tapes, to save space and to make it easier to tension it while taping the rim (inserting the thumb inside the core, it happens very naturally). Sealed: to preserve the tape properties and to underline its “technical product” status, each tape is now contained in a re-sealable bag. Buy Effetto Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Effetto Mariposa Giustaforza Bicycle Torque Wrench is an ideal tool for both professional mechanics and cycling enthusiasts, Giustaforza 1-8 torque wrench has a very small head, to operate in tight spaces.
A workshop favourite, this smaller and highly reliable headed torque wrench including bits from Effetto Giustaforza is ideal for keeping your bike at peak performance. With a capacity of 2 up to 16 NM, you can work precisely on sensitive components quickly and securely. The Giustaforza II torque wrench is made from high-quality construction for maximum performance and durability when you need it most. The home mechanic's dream tool, the Effetto Giustaforza II has a smaller, non-ratcheting head than the Pro, to operate in tight spaces. The Deluxe version is completed with cycling-specific bits and comes into a practical wrap package. Capacity from 2 up to 16 Nm: This is the best torque range for precision bicycle applications and ‘sensitive’ components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves. How to use: Set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0.5 Nm, integers on one side, 0.5 on the other) Insert the appropriate bit (depending on the bolt you need to tighten) Using the tool, a loud ‘CLICK’ and a 3° free-movement tells when the torque has been reached Always take the wrench to minimum torque value after use. Minimal fixed head: Giustaforza’s simple, ‘non-ratcheting’ head has been chosen on purpose on this version, to facilitate the tightening of bolts where space is very limited (like seatpost bolts parallel to the seatpost shaft in zero offset models). The head is now smaller than ever, to maximise this advantage. Lightweight: the light aluminium body keeps the weight down to a record-breaking sub-180g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque. A state-of-the-art tool, built to last: functional, linear in design and precise in any detail: shouldn’t be a surprise to know that Giustaforza II 2-16 has been conceived and produced in Italy. The tool is hard-anodized with laser-etched inscriptions, and it’s built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics furtherly increase its reliability. Each sample is checked and numbered as a single masterpiece. Calibration service: the +-4% tolerance is guaranteed for 5000 cycles (5000 ‘clicks’), then the wrench should be re-calibrated. Calibration is a service offered by Effetto Giustaforza in their laboratories to future proof the tool. After every calibration, the tolerance of +-4% over nominal value will extend for 5000 cycles. After calibration, the wrench will return to the customer with a calibration certificate.
The Giustaforza II 2-16 Pro Anniversary bicycle torque wrench has a gun-metal grey hard anodization and a reversible ratcheting head. This version is completed with cycling-specific bits and comes into a practical workshop case.
This high-performance chain cleaner thoroughly cleans all chain speeds, from single speed all the way up to 10, 11, 12 and 13-Speed chains. If you want to clean the chain in a thorough way and reduce the amount of degreasing liquid used, Mangiacatena is the one for you. It is the first chain cleaner equipped with lamellar elements at both ends, so that the chain can be cleaned by moving it in both directions, very useful also for electric bikes (E-Bikes). Equipped with six rotating brushes and a sturdy handle. Chain Cleaning with Minimum Waste There is nothing wrong with cleaning the chain with the classic brush and solvent liquid in a tin. In that way, however, a lot of solvents are wasted without getting to deep cleaning, unless you want to disassemble the chain and immerse it in the solvent. To avoid disassembly and clean in depth, we have developed Mangiacatena: the best cleaning with the least amount of solvent, in a short time, leaving the chain on the bike. Please Note: Reducing the amount of solvent used doesn’t mean that cleaning takes place without getting dirty. Better to protect the floor with a cloth or work outside. Deep Cleaning Formula The chain runs straight inside Mangiacatena, squeezed at both ends between lamellar plastic (PE) elements with the task of keeping as much solvent inside as possible. The washing is performed by six rotating brushes, continuously soaked in the cleaning liquid, which actively removes dirt on each side, pushing the solvent inside the chain. Instructions for Use: Open Mangiacatena by removing the cover and positioning the lower part of Mangiacatena on the bottom span of the chain Mount the cover making sure it’s perfectly aligned with the lower part, then slide the locking handle in place until it is fully engaged Add the degreasing liquid through the upper holes (it is recommended to use Effetto Mariposa Allpine Extra) until the lower tank is full to the “FILL” level line Keeping Mangiacatena in position with the side handle, pedal backwards for at least 10 full revolutions Note: the two lamellar elements at both ends reduce the waste of solvent, but slow down the sliding of the chain at least in the initial phase… so don't be afraid, just hold the Mangiacatena firmly Note: thanks to the lamellar elements, Mangiacatena allows - without wasting solvent - to pedal in both directions. To do this, it is recommended to keep the rear wheel of the bicycle off the ground (using a workshop stand or other support) It is now possible to move Mangiacatena: release the side locking handle by depressing the thumb lever and remove it, open the cover, disassemble Mangiacatena from the lower span of the chain and position it, as already described, on the upper span of the chain, for a second cleaning step. Add more degreaser if necessary Keeping Mangiacatena in position using the side handle, pedal backwards for at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants) Water rinse: mount Mangiacatena on the lower span of the chain, add water through the top holes and make at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of it in accordance with the law if you use non-biodegradable degreasers or lubricants). Repeat from point 8 until perfect rinsing. In the end, rinse Mangiacatena with water and allow to air dry Dry the chain (rag, compressed air) and do not forget to lubricate it (we recommend our ecological Flowerpower Wax lubricant) Effetto Mariposa has selected Mangiacatena materials and construction for long life. They also provide a complete set of replacement brushes, Mangiacatena Replacement Kit, to replace what you wear without having to throw everything away. They have also chosen to use lamellar PE elements at both ends, instead of the more common sponges, for their greater durability and resistance For Single-Speed Transmissions and 5 to 13 Speed Chains The chain runs straight inside Mangiacatena, instead of following a tortuous path, making it also suitable for single-speed transmissions (for a chain with a maximum width of 9 mm). No problem for traditional 5 to 13 speed chains.
The Allpine Light Eco cleaner is a deep-cleaning, highly efficient and biodegradable bike cleaner that is formulated using pine oil - this superb bike cleaner is ideal for quick cleaning without the need to rinse using water afterwards. With its intense pine scent, Allpine Light is a biodegradable cleaner that will leave your bike clean and shiny. Its formula is very effective against dirt and does not require rinsing, making it ideal also for electric bikes (E-Bikes). Biodegradable Pine Oil Eco Bike Cleaner Allpine Light is harmless to the environment but very effective against dirt. After using it, you can get on a clean bicycle with a nice pine scent - a good way to start an epic ride. It is also ideal for E-Bikes since there is no need to rinse it away after cleaning. There are times when you are in a hurry and a quick cleaning is sufficient, or – especially for e-bikes - you want to limit the use of water close to electrical contacts. For these situations of moderate dirt, Allpine Light and a rag are enough to clean the bike, without the need to rinse with water. Use Without Rinsing: - Spray Allpine Light on a clean rag and wipe the entire frame - After cleaning, the surface will be shiny, with an anti-water and antistatic effect - As it does not contain silicone, it avoids that annoying sticky effect which is a real dust magnet. The surface thus treated also facilitates the flow of water - Note: Allpine Light does not remove the lubricant from the chain, so it is not necessary to relubricate it after such a cleaning - When the going gets tough, it doesn't hold back - If the bike is very dirty and / or muddy, you have to perform a serious cleaning Use With Rinsing: - Generously spray Allpine Light all over the bike - Wait a few minutes to let the product act - Rinse with plenty of water. A sponge or brush is recommended for an optimal result - Dry with a clean cloth. If needed, use more Allpine Light - without rinsing - to remove any streaks or traces of dirt - Lubricate the bicycle (chain, suspension, moving parts) after such a thorough cleaning
The Mangiacatena Replacement Kit is a genuine replacement parts kit for refreshing the internal parts on the Mangiacatena chain cleaner. It includes all brushes and the two lamellar elements, and it is easy to assemble for prolonged service life. This kit allows you to replace the parts subject to normal wear of Mangiacatena, extending its lifespan. Replacing the brushes inside the Mangiacatena is very simple. For lamellar elements, which are glued, it may be necessary to use a cutter or flathead screwdriver to remove the old elements. To glue the new ones, Effetto Mariposa recommends using normal hobby glue or glue for repairing inner tubes. Leave to dry for a few hours before using Mangiacatena.
Super-lightweight and constructed from high-density EVA, this insert gives tubeless tyres an added layer of protection, ideal for those looking to ride of tough terrain. This pack of two impact absorbers is easy-to-install and does not absorb sealant within the tyre, allowing it to work in perfect harmony with your favourite tyre protection systems.
When used on Presta drilled rims (valve hole diameter: 6.5mm), the rubber valve base ensures a perfect air-tightness simply tightening the valve on the rim (with its nut), without any additional adapter. When used on Presta drilled with a wider (> 6.5mm) inside hole, or when used on Schrader drilled rims (valve hole diameter: 8.5mm), Effetto recommend fitting the conic adapter on the valve before inserting it into the rim. Use the metal washer on the outside of the rim, before tightening the valve nut.
Thanks to the addition of microscopic silicate particles, Caffélatex now moves more slowly through holes, allowing the sealing ingredient more time to heal the puncture. These particles are NOT of macroscopic size (e.g., glitter 150-300 microns) but are instead microscopic particles less than 2 microns in diameter. Please read the MBUK's Six of the best guide to tyre sealants. Thus, Caffélatex flow characteristics change on a microscopic level without the headaches of valve-clogging glitter. Puncture repair speed is up to 5 times faster, an improvement especially noticeable with lightweight or thin-casing tyres. Recommended quantities: 30 to 50ml per wheel for road/cyclocross applications; 50ml for mtb tyres up to 26x2.10/29x2.00; 60 to 100ml for mtb tyres over 26x2.10/29x2.00.