Genuine Wheels Manufacturing spare or a great tool on it's ownTo remove sealed bearings you will need the correct size extractor, 8mm & 10mm wrenches (for small sized extractors) or 13mm and 1-ö wrenches (for large sized extractors), hammer and punchThe correct size extractor will fit snugly into the inner diameter (I.D.) of the sealed bearing you wish to extractPlace extractor into I.D. of sealed bearing until it seats flush with the shoulder of the extractorTighten nut with wrench while securing extractor with other wrench. Tighten nut until the extractor is firmly in place within the I. D. of the sealed bearingOnce the extractor is secured, align a punch with back side of the extractorGently tap on the punch until bearing is removed along with the extractorThe bearing is now removed. Install new sealed bearings with a Wheels Mfg PRESS-1 (rear hub & bb-Æs) or PRESS-2 (front hub)
Hanger suitable for the following Specialized frames:99 - 00 Fsr xc Sworks00 - 01 Dh97 - 00 Ground control00 - 01 Enduro00 - 02 P1-P399 - 00 Stump jumper97 - 02 Rockhopper98 - 03 HardrockUpgrade or replacement rear derailleur dropouts; stiffer and more rigid to improve shifting performance CNC machined from solid 6061 aluminium to exact tolerancesStiffer than any original equipment hanger which improves shifting performanceStill breaks before your frame does to perform its main functionAll hangers come with instuctionsDirect replacement for original equipment with guaranteed fitBlack anodised for extra scratch and damage resistanceLaser etched for easy part identification
Wheels Manufacturing Crank Spindle ShimsSimple to install, these BB30 bottom bracket adaptors enable you to run Shimano crankset and other brands with 24mm spindles bikes that are normally only compatible with 30mm spindle types. Simply press these Wheels Manufacturing shims into the BB30 bearings and you’re ready to run your preferred crankset type. The shims are designed for any 24mm non-tapered spindle crank. Based on industry standard BB30 bottom bracket shells they're machined for an exact fit. You will need the 6806 bearings already installed into the BB30 shell to utilise this conversion.Features:Shims press fit directly into BB30 bearings (6806)Removal is the opposite of installationYou may need to gently tap them out from the opposite side Please Note: Not compatible with Cannondale Synapse Frames from 2015 due to a wider BB Shell.Buy Wheels Manufacturing Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
These crank spindle shims will adapt any 24mm non-tapered spindle crank. The shims are based on industry-standard BB30 bottom bracket shells and are easy to install and machined for an exact fit. You will need the 6806 bearings already installed into the BB30 shell to start this conversion. These BB30 bottom bracket adaptors enable you to run a Shimano crankset and other brands with 24mm spindles in bikes that are normally only compatible with 30mm spindle types. Simply press these Wheels Manufacturing BB30 to 24mm Crank Spindle Shims into the BB30 bearings and you’re ready to run your preferred crankset type. Please Note: Not compatible with Cannondale Synapse Frames from 2015 due to a wider BB Shell. Manufacturer's Part Number: WMBB30SHIM
Wheels Manufacturing Emergency derailleur hanger for all bikes with quick release rear wheelsAn essential emergency hanger that allows one to get home by re-attaching the rear derailleur in the event of a failureAttaches to any dropout and held in place by the quick release skewerAllows access to about half of your bikes shifting rangeHigh quality CNC machined aluminiumBlack anodised for resistance to damageCan be easily reused
Giant frames:1997-98: ATX1999-03: XTC AC NRSRainer Boulder SE YukonIquana.Kona 2001: Fire MountainUpgrade or replacement rear derailleur dropouts; stiffer and more rigid to improve shifting performance CNC machined from solid 6061 aluminium to exact tolerancesStiffer than any original equipment hanger which improves shifting performanceStill breaks before your frame does to perform its main functionAll hangers come with instuctions and hardwareDirect replacement for original equipment with guaranteed fitBlack anodised for extra scratch and damage resistanceLaser etched for easy part identification
Key Features:Upgrade or replacement rear derailleur dropouts; stiffer and more rigid to improve shifting performance,CNC machined from solid 6061 aluminium to exact tolerances,Stiffer than any original equipment hanger which improves shifting performance,Still breaks before your frame does to perform its main function,All hangers come with instructions and hardware,Direct replacement for original equipment with guaranteed fit,Black anodised for extra scratch and damage resistance,Laser etched for easy part identification.
To fit the following Kona frames:Dew - 2011-2012Dew City - 2012Dew Deluxe - 2010Dew FS - 2010Dr Dew - 2010Dr Lisa - 2010Fire Mountain - 2011-2012Hula - 2011-2012Lanai - 2011-2012Lisa HT - 2011Mahuna - 2012Makena - 2011-2012Nunu - 2011Shred 2-0 - 2011-2012Shred 2-4 - 2011-2012Splice - 2012Tika - 2012Upgrade or replacement rear derailleur dropouts; stiffer and more rigid to improve shifting performance CNC machined from solid 6061 aluminium to exact tolerancesStiffer than any original equipment hanger which improves shifting performanceStill breaks before your frame does to perform its main functionAll hangers come with instuctions and hardwareDirect replacement for original equipment with guaranteed fitBlack anodised for extra scratch and damage resistanceLaser etched for easy part identification
Upgrade or replacement rear derailleur dropouts; stiffer and more rigid to improve shifting performanceCNC machined from solid 6061 aluminium to exact tolerancesStiffer than any original equipment hanger whichimproves shifting performanceStill breaks before your frame does to perform its main functionAll hangers come with instructions and hardwareDirect replacement for original equipment with guaranteed fitBlack anodised for extra scratch and damage resistanceLaser etched for easy part identification#FitsFits:- Audacio Series - 2010-2013- Ice Lady - 2010- Iron - 2010- OnyxL - 2010- Pro Race - 2010- Pro Race 500 - 2010- Rock Lady - 2010- Shaper 300/ 500/ 700 - 2010- Tandem Route 2 Race Fit - 2010- Tandem X2 Race Team - 2010- Tecnic Series - 2010- X Conttrol L 310 - 2010- X-Control 500 Alloy 710/510/410/310/210 - 2010- Zesty 314L/ 214L - 2010
The replaceable derailleur hanger from Wheels Manufacturing is designed to get you out of those sticky situations when your original hanger gives up the ghost.To find the ideal replacement hanger for your frame you'll need to closely study your hanger and match it with the image on each of the options, if you have any difficulties at all, or can't see your hanger pictured then please feel free to call our team on 0844 499 5656 who will be able to find the perfect replacement for you.
The replaceable derailleur hanger from Wheels Manufacturing is designed to get you out of those sticky situations when your original hanger gives up the ghost.