Fox Suspension 38 Float Performance Grip ForkPart of Fox Suspension's Performance Series, this enduro fork features a high-quality anodised finish on its upper tubes for extra durability as well as protection against corrosion during wet riding conditions. Another highlight is it comes equipped with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability. This makes it simple to dial in your favourite settings, so your suspension matches your riding style as well as the terrain conditions. Also benefitting from Boost axle spacing for increased stiffness and strength, plus many of the brand's finest technologies, this model is ready for hard-hitting enduro rides.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately), which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT GRIP DamperInspired from moto, the GRIP damper uses Fox Suspensions FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Packing the same revolutionary features as the 36 model while redefining what you think a long travel single crown fork is capable of, the Fox Suspension 38 Float Performance Grip Fork sets a new benchmark for confidence, performance, and durability. Features: Upper Tubes Finish: Anodised Use: Enduro Axle Size: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: GRIP (3-position on-the-fly adjustability) Adjustments: Compression damping positions Open, Medium, Firm; Additional micro-adjust between settings Detents; Low-speed rebound Travel: 170mm Rake: 44mm Compatible Rotor Size: 180mm direct Post Mount, up to 230mm compatible Starting Weight: 2180gTechnologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38's elliptical steer tube is one of many ways we've further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it's not. 58mm crown diameter to match modern frame shape profiles. Optional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris (available separately). 31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than the 36 model.Manufacturer's Part Numbers: 910-21-029 Black 27.5" QR110 170mm 44mm 910-21-021 Black 29" QR110 170mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The ARC 1400 DICUT wheels represent the latest generation of the 1400 range from DT Swiss and its aerodynamic partners SWISS SIDE. AERO + profile rims achieve minimal aerodynamic drag at various crosswind angles, setting a new standard for performance. Thanks to its sail effect, you will gain momentum to benefit from crosswind conditions. The lower incidence of the wind allows the rider to maintain a stable aerodynamic position and full control of the bike. Aerodynamic DT Swiss spokes together with the lightweight 240 DICUT hub with Ratchet EXP system for direct hitch complete this top-level wheel. The ARC 1400 DICUT 50 is a set of low profile aerodynamic wheels to take full advantage of your pedaling power on those complicated and aggressive routes. Specification - Net weight 836 g - Recommended maximum weight 110 kg - Wheel diameter - 29 / 700C - Rim height - 50 mm - Inside rim width - 20 mm - Outer rim width - 27 mm - Axle system - 12mm Thru Axle - Installation width - 142 mm - Brake system - Disc Center Lock
The Boardman MHT 8.8 Mens Mountain Bike combines thoroughly tested and carefully selected components to deliver a great blend of speed, control and comfort.Key Features:Lightweight, smooth weld alloy frame with trail geometry and dropper post routing.,The RockShox Judy offers full control over the harshest terrains.,SRAM SX Eagle 12 speed offers a huge range of reliable gearing for all climbs and descents.,Lightweight and powerful Shimano hydraulic brakes,Tubeless ready rims and aggressive Vittoria Barzo tubeless ready tyres,.RockShox Judy forks with 120mm of travel are adjustable to achieve your perfect set up and ensure excellent front wheel grip and comfort. Speed and comfort over trail obstacles are enhanced by 29” wheels, with lightweight but aggressive Vittoria Barzo TNT tubeless ready tyres. A tubeless conversion kit is all you’ll need to ditch tubes forever.SRAM’s new SX Eagle 1 x 12 Speed gearing system makes gear selection simple and you’ll never feel short of choice with an 11-50t cassette. Stopping is taken care of with Shimano hydraulic disc brakes, which offer controlled, powerful stopping.All Tredz bikes are:Fully built & ready to ride,Fully checked & tested by Cytech qualified mechanics,Available with 0% APR finance on any basket over £99,UK price match guarantee,365 day no hassle returns,Free delivery in the UK Mainland on a date that suits you ,.In the box with every Tredz bike is:Free Tredz 9 key trail tool,Free Tredz pedal spanner,Free basic pedals,Tredz drawstring kit bag,16 point quality control check sheet,Basic bike setup instructions,Free Cycle Plan insurance voucher,.
The HollowTech II 12-speed Ultegra chainset with integrated power meter offers an ideal balance of light weight and stiffness, making it the perfect choice for both enthusiast and competitive riders Accurately calibrated strain gauges are integrated inside the crank arm, this provides a stable measurement system through rotation from both sides for extremely precise data +/-2% accuracy of strain gauge measured power Bluetooth and ANT+ with wireless firmware update and data acquisition system Easily rechargeable integrated battery with fully waterproof reliable electric system HollowGlide hollow outer chainring gives vast improvements in rigidity by virtually removing outer chainring flex and hugely improves shift performance, even under high load The chainring teeth have been developed to work in conjunction with 12-speed HG chains for increased contact to provide greater efficiency and improved power transfer Industry leading HollowTech II cold forged 4 arm hollow cranks have been evolved for maximum rigidity while reducing weight Wide gear pitch spacing increases clearance between chain and leading teeth to provide compatibility to frames with O.L.D. 135 / 142 mm A wide range of chainring options and crank arm lengths are available to meet the needs of all riders and racing disciplines HollowTech II integrated bottom bracket uses a wider bearing placement and larger axle diameter for increased stiffness and efficiency HollowTech II integrated bottom bracket seal design has minimal bearing interface ensuring smooth rolling and increased durability(sold separately)
Zipp's 101 XPLR Wheels are purpose built for gravel and adventure riding. Using their innovative single-wall MOTO carbon rim technology, the 101 XPLR provides a super smooth and compliant ride for all day comfort and more traction over rough terrain.Single-wall MOTO carbon fibre rim provides excellent compliance, vibration damping and reduced chance of pinch flatting27mm wide internal profile is ideal for wider, higher volume gravel & adventure tyresTubeless compatible for more traction in rough corners and ability to run lower tire pressureZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagementLifetime WarrantyThe 101 XPLR (short for explore) is purpose-built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures thanks to the 27mm ID tubeless rim. This wheelset is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp s MOTO Technology, the 101 XPRL s single-wall rim construction provides excellent compliance and vibration damping. The 101 XPLR features the ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement. If you want the ultimate gravel & adventure wheelset for your bike, the Zipp 101 XPLR is the best choice around!
The new Shamal Ultra C17 represents the same fantastic performance that has made it THE go-to aluminium race wheel for the better part of two decades while adding even more versatility and performance. The new, wider profile means the C17 standard is perfect for use with the increasingly popular 25/28mm tyre sizes. USB Bearings are ceramic which vastly reduces the weight and greatly improves the smoothness of the bearings. The ceramic ball bearings inside also mean that maintenance will be far less common and it has a much higher resistance to corrosion than standard bearings. The Mega-G3 Spoke pattern is a type of spoke assembly that improves energy transfer between the hub, which reduces stress on the right-hand side which in turn increases the rigidity of the wheel. This is achieved by having twice as many spokes as the left-hand side. The new C17 also allows for a more sure-footed grip in addition to increased comfort while increasing rigidity and thus reactivity at the same time thanks to its wider stance and optimized material usage. Features: Toroidal Milling reduces the peripheral weight of the rim for great reactivity Dynamic Balance where every point of the rim is counterbalanced by an equal weight on the opposite side Ultra-Fit for easy tyre mounting and improved performance for clincher tyres MOMAG: the external rim profile is free of holes, so the structural integrity of the wheel is increased and there is no need for rim tape Differentiated rim height, 27mm front & 30mm rear for optimized structural integrity and performance Carbon hub with USB bearings, aluminium axle Aerodynamic aluminium spokes with exclusive Mega-G3 spoke pattern Weight: 1449g Tech Specs: Spokes Spoke Count: 16 Front and 21 (G3) Rear RDB - Rim Dynamic Balance Aerodynamic Double-Butted Aluminium spokes Ultraliner / DRSC Geometry Self-Locking Aluminium nipples Rims Profile Height: Differentiated (24/27mm at the front - 27/30mm at the rear Material: Aluminium Rim Section: (Height/width): differentiated/22mm Tyre fitment - Clincher with inner tubes Hubs Carbon and aluminium hub USB bearings Width: 100mm (Front) / 130mm (Rear) Oversize flange Cup-and-cone bearing system Freehub: CA 9/10/11/12x, SH 11x or 9/10x with spacers In The Box: New, re-designed quick-release skewers User Manual Warranty Booklet Campagnolo Wheel Identification Card
Sector GCi Carbon Gravel WheelsetWhether you're racing across the mud or simply exploring the countryside gravel roads, this wheelset is engineered for fast and smooth-rolling performance. It features a hard-wearing unidirectional carbon fibre rim construction, which allows you to benefit from its amazing strength without adding any unnecessary grams to your gravel bike. Engineered to excel in high impact environments, this model is equipped with revolutionary TeXtreme Innegra that's integrated into the layup of the rims. This special fibre delivers 75% high impact resistance when compared to standard carbon rims of the same profile. This means you can enjoy high energy rides with superior vibration damping and none of the harsh stiffness associated with carbon.So what is Innegra?Innegra is a fibre derived from polypropylene that exhibits some highly beneficial properties, including high strength-to-weight ratio, resistance to damage, vibration damping and energy dissipation. The TexTreme fabric used in the layup of GCi rim is a Spread Tow fabric built from a hybrid of Innegra and T700 carbon fibres. The Spread Tow layout is significant because it also contributes some positive attributes - the fibres are straighter (reduced crimp therefore higher strength) and it facilitates the use of less resin (lower weight).In the GCi rim the Spread Tow fabric is used on the outer layer of the rim, giving it the unique checkerboard pattern.Sounds good, but what does that mean for a rim? Significantly more compliance...Under a lab test the GCi rim was 50% more vertically compliant than a unidirectional T700 carbon rim of the same profile. This test involves loading the rim with a 100kg weight, in which the GCi rim exhibited a deflection of 15.74mm compared to 10.55mm on the standard T700 rim.It is widely acknowledged that vertical compliance is important for damage reduction (less likely to crack), a reduction of fatigue and to improve traction. Such an improvement in vertical compliance also brings a radically improved ride quality to the GCi wheelset.The Innegra equipped rims do not have the associated harsh stiffness of regular carbon wheels. Significantly more impact resistance...In the lab the GCi rim was able to handle impacts of almost double the standard required for MTB wheels by the UCI. The GCi rim withstood an impact of 140J compared the UCI stipulated requirement of an 80J impact, making it 75% stronger than the UCI requirements. In real world terms, the GCi rim can handle the equivalent of dropping a 15kg weight from a height of up to 1.08 metres onto the bare rim, thus making it 18% stronger than a recognised leading competitor who has published their data. Much less weight...Despite offering strength and compliance advantages, the use of Innegra also allows the construction of an extremely lightweight rim. The Innegra equipped GCi rim weighs just 440g, and Sector's complete wheelset weighs just 1690g.Features: Rim Material: T-700 Unidirectional Carbon Fibre; Outer layer: TeXtreme Plain Weave Spread Tow Carbon Fibre and Innegra S Hybrid Wheel Size: 700c Use: Gravel Spokes / Type: Pillar 1422 Bladed / Straight Pull Nipples: Pillar Black Brass DSN Hub Rotor Fitment: Centrelock Freehub: 6 Pawl (Shimano or SRAM XD options available to select) Hole Count: 24h ERD: 566mm Rim Width: (Internal) 24mm | (External) 31mm Rim Depth: 38mm Tubeless: Yes Single or Pair: Pair End Caps: (Front) 100x12mm / (Rear) 142x12mm Extras: Tubeless Sealant, valves, tape and 15mm end caps Weight: 1690gBuy Sector Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Token Roubx Carbon Gravel Disc WheelsetCarbon-made for a quality-performance and a consistent roll across the most daring gravel courses, these prime RoubX wheels by Token stay strong and stiff as you shoot for CX and XC silverware. This versatile pairing makes the most of its carbon build to stay low in weight and high in performance as you weave your way to the podium. Giving great balance thanks to the 33mm height and 25.3mm width of each rim, a stable and confident roll is assured on every run. Hard-Riding, Carbon-Made Gravel Wheelset Primed to be ridden hard and heartily, each wheel is strengthened by 24 Pillar Wing spokes and spins with the utmost smoothness thanks to the Premium bearings within the Token D1 hubs. The rear hub features a Shimano 10/11-speed compatible freehub for enhanced power transfer as you take on trickier routes, ensuring a top-level performance en route to the finish line. With a tubeless-ready design adding control and grip when running on lower inflation tyres and disc brake-optimisation adding unrivalled stopping abilities, this wicked-riding wheelset is ideal for the fast-paced and adventurous gravel rider. Features: Material: Carbon Fibre Internal Rim Width: 25.3mm External Rim Width: 31.1mm Rim Height: 33mm Spokes: 24 x Pillar Wing 14g Straight, two-cross lacing (per wheel) Hub Type: D1 Freewheel Compatibility: Shimano 10/11-Speed Bearing Type: Premium Axle Spacing: Front: 12x100mm Thru-Axle; Rear: 12x142mm Thru-Axle (adaptors for QR included) Tyre Type: Clincher Tubeless Ready: Yes Brake Type: Disc Brake Weight: 1568g (combined)Buy Token Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fast, fun and versatile is what the HYB range of leisure and fitness hybrids is all about. Frames take inspiration from our SLR road range, but with an extra bit of stability baked in. Puncture-protected 35mm tyres balance low rolling resistance with a plush ride and offer enough grip for light off-roading too. Our new one-piece integrated handlebar and stem adds a clean aesthetic to the look and feel, while the ergonomic grips help to reduce numbness and long ride discomfort.Combining a triple-butted 6061 Aluminium frame and full carbon tapered fork, the HYB 8.8 Women's is a lightweight and agile machine. A 1X10 Shimano Deore drivetrain borrows MTB technology meaning you only need one shifter up front, and with a wide range 11-46 tooth cassette at the rear and a single 44 tooth chainring at the front you have plenty of options for those steep ascents and fast flats.As well as the groupset, Shimano also provide their MT200 hydraulic disc brakes which give powerful, consistent stopping power in all weather conditions. Schwalbe Citizen 35mm tyres with Kevlar (K-Guard) puncture protection deals with rough roads and gravel trails without any difficulties.Finishing the package is our new HYB one-piece handlebar and stem specifically designed for a female fit. This bar works in combination with our soft-touch, adjustable ergonomic grips, women's specific HYB saddle and shorter crank arms for the best possible riding experience.Key Features:Triple butted 6061 X7 Aluminium frame and full carbon tapered fork,Mudguard and pannier rack mounts make year-round riding and commuting practical,Wide range 1X gears cover off all-terrain with simple-shifting,1 Piece bar and stem with adjustable ergonomic grips.
Fast, fun and versatile is what the HYB range of leisure and fitness hybrids is all about. Frames take inspiration from our SLR road range, but with an extra bit of stability baked in. Puncture-protected 35mm tyres balance low rolling resistance with a plush ride and offer enough grip for light off-roading too. Our new one-piece integrated handlebar and stem adds a clean aesthetic to the look and feel, while the ergonomic grips help to reduce numbness and long ride discomfort.Combining a triple-butted 6061 Aluminium frame and full carbon tapered fork, the HYB 8.8 is a lightweight and agile machine. A 1X10 Shimano Deore drivetrain borrows MTB technology meaning you only need one shifter up front, and with a wide range 11-46 tooth cassette at the rear and a single 44 tooth chainring at the front you have plenty of options for those steep ascents and fast flats.As well as the groupset, Shimano also provide their MT200 hydraulic disc brakes which give powerful, consistent stopping power in all weather conditions. Schwalbe Citizen 35mm tyres with Kevlar (K-Guard) puncture protection deals with rough roads and gravel trails without any difficulties.Finishing the package is our stylish new HYB 1 piece handlebar and stem, with soft-touch, adjustable grips allowing you to fine-tune your hand position for maximum comfort and control.Key Features:Triple butted 6061 X7 Aluminium frame and full carbon tapered fork,Mudguard and pannier rack mounts make year-round riding and commuting practical,Wide range 1X gears cover off all-terrain with simple-shifting,1 Piece bar and stem with adjustable ergonomic grips.
The Fox 32 SC is the ultralightweight cross-country racing weapon. The Step-Cast's pioneering lower leg shape isn't just for looks, its narrow stance and stepped design saves weight, decreases frontal area, and provides clearance for the spokes and brake rotor.New graphicsSame stiffness as 34Lockout for increased efficiencyOptional remote lockoutFLOAT EVOL air springSpecification:Damper: FIT GRIP 3-Pos LeverTravel: 100mmAir Spring: FLOAT EVOLAxle Options: Kabolt 110mmSteerer: TaperedWheel size: 29"Offset Options: 44mmUpper Tube Finish: Black AnodizedColours: Matte BlackWeight: 1387g starting weight (3.06 lbs.)
Riders seeking a strong durable and lightweight wheelset for rugged road and gravel adventures will find this 650B/27.5 diameter wheel with wider rims a perfect choice. It makes no compromises on responsiveness durability and ease of use.The lightweight aluminum rims feature ISM4D technology which strategically removes material from the rim where it’s not needed but keeps it around the spokes where tension is applied. Double butted spokes further reduce weight and make the wheel feel more responsive. The spokes have an aero elliptical shape that can save 5 watts of energy while maintaining your speed. Super-wide rims (25mm internal) are compatible with tubeless tires up to 64mm to absorb road shocks and vibrations. You get 5cm of “tire travel” to cushion your ride and the smaller-diameter rims allow you to retain the agile handling you want with a drop-bar bike.Our UST system has been improved with a new rim bed shape that makes it easier than ever to install and change tires. Fore technology attaches the spokes to the rim without the need to drill the upper rim bed so no tape is required. No hassles no added weight. Our new Infinity hub platform optimizes spoke lacing with highly controlled tension for maximum power transfer and the Instant Drive 360 freewheel coupled with our automatic bearing preload adjustment (QRM Auto) provides fast engagement stiffness and added durability. The wheels use center lock brake rotors and are available with Shimano or SRAM XD-Road driver bodies and can convert to Campagnolo with an optional driver body. The front hub is a 12mm thru-axle that can convert to 15mm or quick release. The rear is a 12x142 and can also convert to quick release. Key benefits Traction rolling efficiency and confidence on all types of terrain Wider 650B/27.5 rims let you run larger high-volume tires and still maintain the responsive handling of a normal road bike 5cm of plush “tire travel” improves traction and comfort prevents pinch flats and lets you dial in the perfect tire pressure for the terrain UST Tubeless compatibility for lower rolling resistance Superlight and durable ISM4D rim is only 440g Patented lightweight aero spokes Automatic bearing preload (QRM Auto) requires no adjustment and guarantees long-term durability Fore drilling doesn't require the use of rim tape - 30g saved per wheel Laterally stiff and vertically compliant for a dynamic ride quality Fore technology keeps the rim upper bridge solid to make the rim stiffer 17mm axle and new hub design ID360 freewheel technology is 12mm compatible convertible to quick release (15mm axle option through axle replacement) Rims Material: Maxtal Tire: UST Tubeless and tubetype Disc brake specific profile SUP welding technology Fore tapeless tubeless technology UST tubeless technology Weight reduction: ISM 4D Internal width: 25 mm Hookless profile Height: 22 mm ETRTO size : 584x25TSS Spokes Count: 24 front and rear Nipples: Fore integrated aluminum Material: steel Shape: straight pull elliptical aero double butted (patented) Lacing: front and rear crossed 2 contactless Delivered with User guide UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) Intended use Recommended tire sizes: 28 to 64 mm (11 to 25) ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 41bar/59PSI with a 28mm tyre - 245bar/36PSI with a 64mm tyre Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible Front: Quick release 12x100 and 15x100 through axle compatible QRM Auto bearing preload technology Infinity hubs Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Rear axle: 12mm thru axle convertible to Quick Release with optional adapters and axle replacement Front axle: 12mm thru axle easily convertible to quick release with optional adapters Convertible to 15mm with complete axle replacement Versions Disc standard: Center Lock® only Freewheel: Shimano/Sram or XD-Road Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 15mm axle (V2373501) ID360 Shimano / Sram Light freewheel body (V3850101) ID360 Campagnolo freewheel body (V3440101) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101) 15mm axle (LVXXXXXX) 12 to 9mm rear adapter for quick release (V2510801 (with axle V2373401) ID360 N3W freewheel body (V4270101) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape