crankbrothers Mallet E LS PedalsDesigned for enduro riding, the Mallet E LS Pedals from crankbrothers will give you the extra edge. Featuring longer spindles for enhanced control and optimised clearance, they're equipped with 6 adjustable pins per side, traction pads, and a ribbed body, guaranteeing a slip-free and stable platform. They feature a four-sided easy engagement system, so you can just stamp down and go and also benefit from sealed cartridge bearings for excellent durability that's ready for whatever challenge you meet on the trail.PerformanceThe concave pedal platform offers a more secure foothold. Like it's DH equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design also provides excellent mud shedding. 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.FitIncreased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately. Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.DurabilityOuter enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.MaintenanceCrankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features: 6 adjustable pins per side for grip 4-sided entry Superior mud-shedding capabilities Chamfered edges to reduce rock-strikes Premium bearings and double seal system Cleat Type: Premium brass cleats with shimsCleat Included: YesBody Material: 6061-T6 Aluminium/Composite Spindle Material: Scandium 435 Chromoly (CrMo) Wing Material: 17-4PH Stainless Steel Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Release angle: 15°/20° (customisable)Q-Factor: 57mm Weight: 424g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Performance The concave pedal platform offers a more secure foothold. Like its downhill (DH) equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. The ribbed body on these crankbrothers Mallet E LS mountain bike (MTB) pedals allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design also provides excellent mud shedding. 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal. Fit Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately. Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Durability The outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. Maintenance It is good to know that crankbrothers Mallet E LS Pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.
crankbrothers Mallet E PedalsDesigned with Enduro racing in mind, the Mallet E Pedals from crankbrothers feature a unique concave platform that gives you a stable and secure foothold for optimum control when tackling tough trails. PerformanceThe concave pedal platform offers a more secure foothold. Like it's Downhill (DH) equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. The ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design also provides excellent mud shedding. 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.FitIncreased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately.Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.DurabilityOuter enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.MaintenanceCrankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features:Spindle Material: Forged SCM 435 Chromoly (CrMo) steelBody Material: 6061-T6 aluminiumWing Material: 17-4PH stainlessPins: 12 pins per pedalSpring Material: 300 series stainless steelQ-factor: 52mmInner Bearing Type: Igus LL-glide bearingOuter Bearing Type: Enduro cartridge bearingEndcap: Hex alloyCleat: Premium brass cleats with shims includedWeight: 419g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Mallet E PedalsDesigned with Enduro racing in mind, the Mallet E Pedals from crankbrothers feature a unique concave platform that gives you a stable and secure foothold for optimum control when tackling tough trails. PerformanceThe concave pedal platform offers a more secure foothold. Like it's Downhill (DH) equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. The ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design also provides excellent mud shedding. 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.FitIncreased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately.Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.DurabilityOuter enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.MaintenanceCrankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features:Spindle Material: Forged SCM 435 Chromoly (CrMo) steelBody Material: 6061-T6 aluminiumWing Material: 17-4PH stainlessPins: 12 pins per pedalSpring Material: 300 series stainless steelQ-factor: 52mmInner Bearing Type: Igus LL-glide bearingOuter Bearing Type: Enduro cartridge bearingEndcap: Hex alloyCleat: Premium brass cleats with shims includedWeight: 419g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Performance The concave pedal platform of this model offers a more secure foothold. Like its downhill (DH) equivalent, you get that flat pedal feel whilst running clipless. They're 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design of the crankbrothers Mallet E also provides excellent mud shedding. Plus, they also boast 4-sided entry, meaning you can clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal. Fit Increased float: 6° of side-to-side rotational play. The float of crankbrothers Mallet E Pedals allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately. Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Durability The outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. Maintenance Crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit. Additional Information: Warranty: 5 years
Shoes designed to match crankbrothers pedal ranges. Mallet E is designed to be ideal for big days out on the bike. They combine a stiff shank for pedalling efficiency with a ramped toe and grippy tread making them ideal for hike a bike situations. Combine with the Mallet E or Mallet E long spindle pedals. Upper Speedlace and strap for fast and secure adjustment. Lace pocket at the top of the tongue to store away your laces for safety and clean aesthetic. Ventilated windows with perforated mesh material for breathability. Padded tongue for protection. TPU reinforced areas for protection and abrasion resistance. Heel dots for grip and superior heel hold. Hidden eyelets for durability and clean design. Outsole Match Box optimised for any MTB pedals; Ramp for easy clip-in / clip-out and mud clearance Pre-installed crankbrothers match shim and cleat - just adjust and tighten and they're ready to ride. Can be used with any brand of SPD cleat simply remove the grey match shim and set up directly in the match box. MC1 mid-friction compound for easy exit from the pedal. Directional angled and spaced toe / heel lugs for traction whilst hiking. Ramped toe for walkability. Stiff shank for power transfer when pedalling. Cushioned EVA midsole for shock absorption. Sizing uses a USA last so select size based on UK normal shoe sizing. The range runs true to size so there's no need to size up. They're available in sizes 4 - 13 with half sizes available from 5.5 - 11.5.
Just as with their highly regarded pedal systems, attention to detail and innovative engineering are the hallmarks of the Mallet E Speedlace MTB Clipless Cycling Shoes. Whichever MTB clip-in pedal system you prefer, the exclusive Match System sole design delivers smooth and no-nonsense cleat engagement, letting you clip in easily and get in your trail-shredding flow without delay. The sleek and stylish upper design uses premium materials, delivering a snug comfortable fit as well as excellent trail-ready durability. Perforations and mesh windows offer excellent breathability to avoid sweat build-up inside and ensure you enjoy fresh feet throughout your ride. A reinforced toe box protects against impacts while oversize TPU reinforcements to the sides, toe and heel add abrasion resistance in more vulnerable areas. A padded tongue also adds an extra layer of comfort and protection. Match Box MTB Pedal System Crank Brothers have carefully engineered their innovative Match Box cleat box to ensure you enjoy quick and easy clipping in, no matter which clip-in MTB pedal system you prefer. Ramped zones to the front and rear of the cleat box make for a quick and easy cleat engagement and add extra mud clearance for all-weather performance. An extended cleat track, the 'race zone', lets you get just the right cleat position for bike control and pedal stability too. And with its stiff shank, you'll enjoy excellent power transfer on the more pedal-heavy bits of trail. Meanwhile, when you're off the bike and walking up to session a trail feature, the toe and heel lugs provide traction on loose and muddy surfaces and the toe is ramped for improved walkability too. Fuss Free Lacing When you want to get your shoes on and riding, the Speed Lacing system makes it a straightforward affair. A quick pull and you can get the fit just right, and there's a lace pocket to keep the lace end safe and the shoes streamlined. An upper strap gives an extra level of security and a solid fit that won't let you down. Cleat Guidance These MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard). They come supplied with pre-installed Crankbrothers Match Shim and a pre-installed cleat for Crankbrothers pedals but are compatible with other systems e.g.: Shimano SPD, Time ATAC, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.
Crankbrothers Mallet E Speedlace MTB Clipless Cycling ShoesWith their innovative Match System sole unit, the Crankbrothers Mallet E Speedlace MTB Clipless Cycling Shoes offer super quick and easy engagement of pedal cleats to pedal. Less time hunting for the clip in point and more time enjoying your e-mountain bike riding trail riding. Crankbrothers are renowned for their beautifully engineered mountain bike pedal systems and that same know how and attention to excellence comes to the Mallet E Speedlace MTB Clipless Cycling Shoes. They're designed for the demands of EMTB riders with a tough but comfortable upper matched to a responsive sole unit. The sleek and stylish upper design uses premium materials, delivering a snug comfortable fit as well as excellent trail-ready durability. Perforations and mesh windows offer excellent breathability to avoid sweat build-up inside, ensuring you enjoy fresh feet throughout your ride. A reinforced toe box protects against impacts while oversize TPU reinforcements to the sides, toe and heel add abrasion resistance in more vulnerable areas. A padded tongue also adds an extra layer of comfort and protection.Match Box MTB Pedal SystemCrank Brothers have carefully engineered their innovative Match Box cleat box to ensure you enjoy quick and easy clipping in, no matter which clip-in MTB pedal system you prefer.Ramped zones to the front and rear of the cleat box make for a quick and easy cleat engagement and add extra mud clearance for all-weather performance. An extended cleat track, the 'race zone', lets you get just the right cleat position for bike control and pedal stability too. And with its stiff shank, you'll enjoy excellent power transfer on the more pedal-heavy bits of trail. Meanwhile, when you're off the bike and walking up to session a trail feature, the toe and heel lugs provide traction on loose and muddy surfaces and the toe is ramped for improved walkability too. Fuss Free LacingWhen you want to get your shoes on and riding, the Speed Lacing system makes it a straightforward affair. A quick pull and you can get the fit just right, and there's a lace pocket to keep the lace end safe and the shoes streamlined. An upper strap gives an extra level of security and a solid fit that won't let you down. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard). They come supplied with pre-installed Crankbrothers Match Shim and a pre-installed cleat for Crankbrothers pedals but are compatible with other systems e.g.: Shimano SPD, Time ATAC, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:E-MTB Enduro/Trail ShoeSpeed lace & strap for fast and secure adjustmentVentilated windows with perforated mesh material for breathabilityPU reinforced areas for protection and abrasion resistance plus padded tongue for protectionHidden eyelets for durability and clean designMatch Box cleat zone optimized for any MTB pedals - ramped for easy clip-in/out and mud clearanceMC1 mid-friction compound for easy exit and cushioned EVA midsole for shock absorptionStamp tread pattern optimized for contact surface and compatibilityDirectional angled & spaced toe/heel lugs for traction while hiking andramped toe for walkability2 bolt cleat compatible - Pre-installed Match Shim for Crankbrothers pedals - Pre-installed cleat for Crankbrothers pedals Buy Crank Brothers Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Crankbrothers Mallet E Speedlace MTB Clipless Cycling ShoesWith their innovative Match System sole unit, the Crankbrothers Mallet E Speedlace MTB Clipless Cycling Shoes offer super quick and easy engagement of pedal cleats to pedal. Less time hunting for the clip in point and more time enjoying your e-mountain bike riding trail riding. Crankbrothers are renowned for their beautifully engineered mountain bike pedal systems and that same know how and attention to excellence comes to the Mallet E Speedlace MTB Clipless Cycling Shoes. They're designed for the demands of EMTB riders with a tough but comfortable upper matched to a responsive sole unit. The sleek and stylish upper design uses premium materials, delivering a snug comfortable fit as well as excellent trail-ready durability. Perforations and mesh windows offer excellent breathability to avoid sweat build-up inside, ensuring you enjoy fresh feet throughout your ride. A reinforced toe box protects against impacts while oversize TPU reinforcements to the sides, toe and heel add abrasion resistance in more vulnerable areas. A padded tongue also adds an extra layer of comfort and protection.Match Box MTB Pedal SystemCrank Brothers have carefully engineered their innovative Match Box cleat box to ensure you enjoy quick and easy clipping in, no matter which clip-in MTB pedal system you prefer.Ramped zones to the front and rear of the cleat box make for a quick and easy cleat engagement and add extra mud clearance for all-weather performance. An extended cleat track, the 'race zone', lets you get just the right cleat position for bike control and pedal stability too. And with its stiff shank, you'll enjoy excellent power transfer on the more pedal-heavy bits of trail. Meanwhile, when you're off the bike and walking up to session a trail feature, the toe and heel lugs provide traction on loose and muddy surfaces and the toe is ramped for improved walkability too. Fuss Free LacingWhen you want to get your shoes on and riding, the Speed Lacing system makes it a straightforward affair. A quick pull and you can get the fit just right, and there's a lace pocket to keep the lace end safe and the shoes streamlined. An upper strap gives an extra level of security and a solid fit that won't let you down. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard). They come supplied with pre-installed Crankbrothers Match Shim and a pre-installed cleat for Crankbrothers pedals but are compatible with other systems e.g.: Shimano SPD, Time ATAC, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:E-MTB Enduro/Trail ShoeSpeed lace & strap for fast and secure adjustmentVentilated windows with perforated mesh material for breathabilityPU reinforced areas for protection and abrasion resistance plus padded tongue for protectionHidden eyelets for durability and clean designMatch Box cleat zone optimized for any MTB pedals - ramped for easy clip-in/out and mud clearanceMC1 mid-friction compound for easy exit and cushioned EVA midsole for shock absorptionStamp tread pattern optimized for contact surface and compatibilityDirectional angled & spaced toe/heel lugs for traction while hiking andramped toe for walkability2 bolt cleat compatible - Pre-installed Match Shim for Crankbrothers pedals - Pre-installed cleat for Crankbrothers pedals Buy Crank Brothers Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Crankbrothers Mallet E Speedlace MTB Clipless Cycling ShoesWith their innovative Match System sole unit, the Crankbrothers Mallet E Speedlace MTB Clipless Cycling Shoes offer super quick and easy engagement of pedal cleats to pedal. Less time hunting for the clip in point and more time enjoying your e-mountain bike riding trail riding. Crankbrothers are renowned for their beautifully engineered mountain bike pedal systems and that same know how and attention to excellence comes to the Mallet E Speedlace MTB Clipless Cycling Shoes. They're designed for the demands of EMTB riders with a tough but comfortable upper matched to a responsive sole unit. The sleek and stylish upper design uses premium materials, delivering a snug comfortable fit as well as excellent trail-ready durability. Perforations and mesh windows offer excellent breathability to avoid sweat build-up inside, ensuring you enjoy fresh feet throughout your ride. A reinforced toe box protects against impacts while oversize TPU reinforcements to the sides, toe and heel add abrasion resistance in more vulnerable areas. A padded tongue also adds an extra layer of comfort and protection.Match Box MTB Pedal SystemCrank Brothers have carefully engineered their innovative Match Box cleat box to ensure you enjoy quick and easy clipping in, no matter which clip-in MTB pedal system you prefer.Ramped zones to the front and rear of the cleat box make for a quick and easy cleat engagement and add extra mud clearance for all-weather performance. An extended cleat track, the 'race zone', lets you get just the right cleat position for bike control and pedal stability too. And with its stiff shank, you'll enjoy excellent power transfer on the more pedal-heavy bits of trail. Meanwhile, when you're off the bike and walking up to session a trail feature, the toe and heel lugs provide traction on loose and muddy surfaces and the toe is ramped for improved walkability too. Fuss Free LacingWhen you want to get your shoes on and riding, the Speed Lacing system makes it a straightforward affair. A quick pull and you can get the fit just right, and there's a lace pocket to keep the lace end safe and the shoes streamlined. An upper strap gives an extra level of security and a solid fit that won't let you down. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard). They come supplied with pre-installed Crankbrothers Match Shim and a pre-installed cleat for Crankbrothers pedals but are compatible with other systems e.g.: Shimano SPD, Time ATAC, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:E-MTB Enduro/Trail ShoeSpeed lace & strap for fast and secure adjustmentVentilated windows with perforated mesh material for breathabilityPU reinforced areas for protection and abrasion resistance plus padded tongue for protectionHidden eyelets for durability and clean designMatch Box cleat zone optimized for any MTB pedals - ramped for easy clip-in/out and mud clearanceMC1 mid-friction compound for easy exit and cushioned EVA midsole for shock absorptionStamp tread pattern optimized for contact surface and compatibilityDirectional angled & spaced toe/heel lugs for traction while hiking andramped toe for walkability2 bolt cleat compatible - Pre-installed Match Shim for Crankbrothers pedals - Pre-installed cleat for Crankbrothers pedals Buy Crank Brothers Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Crankbrothers Mallet E Speedlace MTB Clipless Cycling ShoesWith their innovative Match System sole unit, the Crankbrothers Mallet E Speedlace MTB Clipless Cycling Shoes offer super quick and easy engagement of pedal cleats to pedal. Less time hunting for the clip in point and more time enjoying your e-mountain bike riding trail riding. Crankbrothers are renowned for their beautifully engineered mountain bike pedal systems and that same know how and attention to excellence comes to the Mallet E Speedlace MTB Clipless Cycling Shoes. They're designed for the demands of EMTB riders with a tough but comfortable upper matched to a responsive sole unit. The sleek and stylish upper design uses premium materials, delivering a snug comfortable fit as well as excellent trail-ready durability. Perforations and mesh windows offer excellent breathability to avoid sweat build-up inside, ensuring you enjoy fresh feet throughout your ride. A reinforced toe box protects against impacts while oversize TPU reinforcements to the sides, toe and heel add abrasion resistance in more vulnerable areas. A padded tongue also adds an extra layer of comfort and protection.Match Box MTB Pedal SystemCrank Brothers have carefully engineered their innovative Match Box cleat box to ensure you enjoy quick and easy clipping in, no matter which clip-in MTB pedal system you prefer.Ramped zones to the front and rear of the cleat box make for a quick and easy cleat engagement and add extra mud clearance for all-weather performance. An extended cleat track, the 'race zone', lets you get just the right cleat position for bike control and pedal stability too. And with its stiff shank, you'll enjoy excellent power transfer on the more pedal-heavy bits of trail. Meanwhile, when you're off the bike and walking up to session a trail feature, the toe and heel lugs provide traction on loose and muddy surfaces and the toe is ramped for improved walkability too. Fuss Free LacingWhen you want to get your shoes on and riding, the Speed Lacing system makes it a straightforward affair. A quick pull and you can get the fit just right, and there's a lace pocket to keep the lace end safe and the shoes streamlined. An upper strap gives an extra level of security and a solid fit that won't let you down. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard). They come supplied with pre-installed Crankbrothers Match Shim and a pre-installed cleat for Crankbrothers pedals but are compatible with other systems e.g.: Shimano SPD, Time ATAC, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:E-MTB Enduro/Trail ShoeSpeed lace & strap for fast and secure adjustmentVentilated windows with perforated mesh material for breathabilityPU reinforced areas for protection and abrasion resistance plus padded tongue for protectionHidden eyelets for durability and clean designMatch Box cleat zone optimized for any MTB pedals - ramped for easy clip-in/out and mud clearanceMC1 mid-friction compound for easy exit and cushioned EVA midsole for shock absorptionStamp tread pattern optimized for contact surface and compatibilityDirectional angled & spaced toe/heel lugs for traction while hiking andramped toe for walkability2 bolt cleat compatible - Pre-installed Match Shim for Crankbrothers pedals - Pre-installed cleat for Crankbrothers pedals Buy Crank Brothers Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Crankbrothers Mallet E Speedlace MTB Clipless Cycling ShoesWith their innovative Match System sole unit, the Crankbrothers Mallet E Speedlace MTB Clipless Cycling Shoes offer super quick and easy engagement of pedal cleats to pedal. Less time hunting for the clip in point and more time enjoying your e-mountain bike riding trail riding. Crankbrothers are renowned for their beautifully engineered mountain bike pedal systems and that same know how and attention to excellence comes to the Mallet E Speedlace MTB Clipless Cycling Shoes. They're designed for the demands of EMTB riders with a tough but comfortable upper matched to a responsive sole unit. The sleek and stylish upper design uses premium materials, delivering a snug comfortable fit as well as excellent trail-ready durability. Perforations and mesh windows offer excellent breathability to avoid sweat build-up inside, ensuring you enjoy fresh feet throughout your ride. A reinforced toe box protects against impacts while oversize TPU reinforcements to the sides, toe and heel add abrasion resistance in more vulnerable areas. A padded tongue also adds an extra layer of comfort and protection.Match Box MTB Pedal SystemCrank Brothers have carefully engineered their innovative Match Box cleat box to ensure you enjoy quick and easy clipping in, no matter which clip-in MTB pedal system you prefer.Ramped zones to the front and rear of the cleat box make for a quick and easy cleat engagement and add extra mud clearance for all-weather performance. An extended cleat track, the 'race zone', lets you get just the right cleat position for bike control and pedal stability too. And with its stiff shank, you'll enjoy excellent power transfer on the more pedal-heavy bits of trail. Meanwhile, when you're off the bike and walking up to session a trail feature, the toe and heel lugs provide traction on loose and muddy surfaces and the toe is ramped for improved walkability too. Fuss Free LacingWhen you want to get your shoes on and riding, the Speed Lacing system makes it a straightforward affair. A quick pull and you can get the fit just right, and there's a lace pocket to keep the lace end safe and the shoes streamlined. An upper strap gives an extra level of security and a solid fit that won't let you down. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard). They come supplied with pre-installed Crankbrothers Match Shim and a pre-installed cleat for Crankbrothers pedals but are compatible with other systems e.g.: Shimano SPD, Time ATAC, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:E-MTB Enduro/Trail ShoeSpeed lace & strap for fast and secure adjustmentVentilated windows with perforated mesh material for breathabilityPU reinforced areas for protection and abrasion resistance plus padded tongue for protectionHidden eyelets for durability and clean designMatch Box cleat zone optimized for any MTB pedals - ramped for easy clip-in/out and mud clearanceMC1 mid-friction compound for easy exit and cushioned EVA midsole for shock absorptionStamp tread pattern optimized for contact surface and compatibilityDirectional angled & spaced toe/heel lugs for traction while hiking andramped toe for walkability2 bolt cleat compatible - Pre-installed Match Shim for Crankbrothers pedals - Pre-installed cleat for Crankbrothers pedals Buy Crank Brothers Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.