The TNS-4 makes it quick and easy to install star-fangled nuts used with 1" and 1-1/8" threadless headset systems
Park Tool Deluxe Wall Mount Repair Stand PRS-4W-2Simple to mount on to posts or walls, the PRS-4W-2 Repair Stand benefits from Park Tool’s renowned quality and easy to use design. Once your bike is held in the clamp, this advanced bike work stand has a rotatable design, so you can position the bike at any angle for accessing hard to reach areas. Ready for frame sizes up to 76mm (3”) in diameter and aero shaped frames, the clamping pressure of the quick release clamp can be carefully adjusted to prevent damage to expensive carbon frames and seatposts. Features: Material: Steel with powder coat finish Clamp Type: 100-3D Grips nearly any tube from 23-76mm (7/8" - 3"), including aero tubes Cam-actuated adjustment system for quick entry, adjustment and exit Fully adjustable clamping pressure prevents damage to thin-walled tubes Narrow clamping jaws (7cm / 2.7") designed to clamp securely yet fit into tight areas or on short seat posts Durable replaceable clamp covers (#1960) Wall mount extends 14cm (5-1/2") from mounting surface, centre of clamp sits 33cm (13") from mounting surface when installed Mounting bolts not included Weight Limit: 45kg / 100lbs Wall Mounting Plate Size: 15x6cm (6" x 2.5") Mounting Hole Sizes: 13mm (0.5") in diameter and 100mm (4") apartManufacturer's Part Number: QKPRS4W2 Weight: 4.5kg (10lbs)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
With a powder coat finish, the The Park Tool wall mount repair stand is designed to be fitted easily to any post or wall stud, and places the clamp approximately 13 inches from the wall. Note: Mounting bolts not included.
A workshop quality repair stand for mounting onto a wall.Key Features:Uses the same 100-3C heavy duty adjustable clamp as the PRS-2OS1 and PRS-3 OS1 deluxe oversize workshop stands.Heavy duty adjustable linkage clamp fits frame tubes up to 1-5/8inches (41 mm).Designed to be wall mounted>Clamp rotates 360 degrees.Mounts easily to any flat surface.Mounting bolts not included.Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
The special cross back design removes pressure from the neck for all day comfort. A nylon quick release makes the apron easy to adjust and take off. A full 35" in length, the bottom 7" of the apron can be snapped up for a custom height fit. An embroidered Park Tool logo makes the apron as good-looking (even when it's dirty) as it is functional.
Park Tool Home Mechanic Deluxe Workstand PCS10.3The Home Mechanic Deluxe Workstand PCS10.3 from Park Tool is the ideal repair stand for holding your bike stable when tuning, tooling and optimising your bikes performance.Workshop Quality Bike Repair StandA work stand is the backbone of any shop. Holding the bike at a convenient working height allows easy access for adjustments, cleaning and repair. The PCS-10.3 Deluxe Home Mechanic Repair Stand was designed and built using Park Tool's 50 years of experience creating professional shop stands used in shops around the world. The unique three-point leg system and stout adjustable uprights create an extremely solid platform capable of handling bikes up to 80 lbs. (36kg). Easy to set up and use in a home shop, the PCS-10.3 also folds easily for transport or storage. Adjustable, Stable and Convenient Bike WorkstandWorld-famous Park Tool cam-actuated, micro-adjustable clamp that allows quick entry and exit and fits 1" to 3" (25mm-76mm) diameter tubes and seat posts of any shape and material. It features narrow clamping jaws (2.7"/7cm) that fit into tight areas or on short seat posts. Plus, its mounting clamp has a 360° infinite clamp rotation that allows the bike to be placed in the optimal position for specific repairs. It features an all-steel structure for maximum stiffness and durability. Also, it's engineered with teardrop-shaped tubing that adds strength and ensures perfect positioning during use and when folded for storage. And, it folds quickly and easily to 43" for storage using aluminium quick-release mechanisms and strong tubular support braces. Features: Quick-release height adjustment from 39" to 57" (99cm-145cm) Durable textured powder coat finish Super-strong glass-filled nylon composite fittings and top tube internals creating smooth rotation and secure positioning Includes height adjustable compact tray to hold small parts, a few tools and the PTH-1 Paper Towel Holder (optional accessory) Base when open forms a triangle of 36" x 36" x 48" (92cm x 92cm x 121cm) Maximum Weight Capacity*: 36 kg (80 lbs.) *NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs Weight: 17 lbs. (7.71kg)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
A workstand is the backbone of any shop. Holding the bike at a convenient working height allows easy access for adjustments, cleaning and repair. The Home Mechanic Deluxe Workstand PCS10.3 was designed and built using Park Tool's 50 years of experience creating professional shop stands used in shops around the world. The unique three-point leg system and stout adjustable uprights create an extremely solid platform capable of handling bikes up to 80 lbs. (36kg). Easy to set up and use in a home shop, this model of the Park Tool PCS 10 also folds easily for transport or storage. Adjustable, Stable and Convenient Bike Workstand World-famous Park Tool cam-actuated, micro-adjustable clamp that allows quick entry and exit and fits 1" to 3" (25mm–76mm) diameter tubes and seat posts of any shape and material. It features narrow clamping jaws (2.7"/7cm) that fit into tight areas or on short seat posts. This stand's mounting clamp has a 360° infinite clamp rotation that allows the bike to be placed in the optimal position for specific repairs. It features an all-steel structure for maximum stiffness and durability. It's also engineered with teardrop-shaped tubing that adds strength and ensures perfect positioning during use and when folded for storage. In addition, it folds quickly and easily to 43" for storage using aluminium quick-release mechanisms and strong tubular support braces. Additional Item Top Features: Maximum Weight Capacity*: 36 kg (80 lbs.) *NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs.
Introducing the Park Tool 10.3 Deluxe Repair Stand; a full-featured bicycle work stand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing.Cam-actuated micro-adjustable clamp fits 7/8" to 3" (22 mm 76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper postsNarrow clamping jaws (2.7"/70 mm) fit into tight areas or on short seat postsRubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storageDurable, textured powder coat finishIntegrated height-adjustable parts trayHeight adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately)Maximum weight capacity*: 36 kg Height adjustable from 39" to 57" (990 mm 1450 mm) using convenient quick-release leverBase when open forms a triangle of 36" x 36" x 48" (920 mm x 920 mm x 1210 mm)Folds down to 45" x 14.5" (1140 mm x 370 mm)Weight: 7.2kg (16lbs)*Please Note: The maximum weight capacity of the PCS-10.3 assumes the weight is centred below the clamp and between the legs.The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes*.The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair.
A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit as well as a quick-release height adjustment lever for easy secure adjustment. Featuring 18' (460mm) of height adjustment and 360 degrees of clamp rotation positioning all parts of the bike within reach for any mechanic whether seated or standing The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability with tubular support braces a locking support yoke and upgraded internals for extra dependability The PCS-10.3 is able to hold up to 80lbs. (36kg) which allows for compatibility with virtually all two-wheeled pedal-driven bicycles including fat bikes and most e-bikes.* The PCS-10.3 features an integrated height-adjustable parts tray as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) so your tools and small parts are always within reach Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments cleaning and repair The new PCS-10.3 features: Cam-actuated micro-adjustable clamp fits 7/8' to 3' (22mm - 76mm) diameter tubes and seat posts of any shape and material including aero posts and dropper posts Narrow clamping jaws (2.7'/70mm) fit into tight areas or on short seat posts Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage Durable textured powder coat finish Integrated height-adjustable parts tray Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) Maximum weight capacity*: 80lbs. (36kg) Height adjustable from 39' to 57' (990mm - 1450mm) using convenient quick-release lever Base when open forms a triangle of 36' x 36' x 48' (920mm x 920mm x 1210mm) Folds down to 45' x 14.5' (1140mm x 370mm) Weight: 16lbs. (7.2kg) Note :The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs
A full-featured bicycle workstand designed and built for the home mechanicThe PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment,Featuring 18 (460mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing,The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability,The PCS-10.3 is able to hold up to 80lbs. (36kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.*,The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach,Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion,The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair, The new PCS-10.3 features: Cam-actuated micro-adjustable clamp fits 7/8 to 3 (22mm - 76mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts, Narrow clamping jaws (2.7/70mm) fit into tight areas or on short seat posts, Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage, Durable, textured powder coat finish, Integrated height-adjustable parts tray, Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), Maximum weight capacity*: 80lbs. (36kg), Height adjustable from 39 to 57 (990mm - 1450mm) using convenient quick-release lever, Base when open forms a triangle of 36 x 36 x 48 (920mm x 920mm x 1210mm) ,Folds down to 45 x 14.5 (1140mm x 370mm), Weight: 16lbs. (7.2kg), Note :The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs,.
The PCS4 workstand is a great addition to any keen cyclist or mountain biker's workshop that folds away when you need the space to bring the car into the garage or build that canoe you have always wished for. The PCS-4 is a heavy duty folding stand with your choice of shop quality clamps. Perfect for heavier duty home use or portable shop use, the PCS-4 features a rock solid, four-point leg system that folds together for storage, steel powder coated tubing, and a composite horizontal tube.
A dependable workstand for the home mechanic with a deluxe clampWorking height of clamp adjusts from 53 to 67 inches (34 to 170 cm)Infinite 360 degree rotation of clamp head for perfect positioningTapered rotational locking systemFolds flat for easy storageConstructed of powder coated steel tubing for durabilityRubber feet are adjustable for uneven floors