Keep your Peaty s Holeshot Kit topped up with some spare plugs for those trailside punctures. This pack contains 6 plugs.Available in 1.5mm & 3mm plug sizes6 plugs per pack, in 2 sheets of 3 plugsDesigned to fit perfectly into the body of Peaty's Holeshot Tyre Puncture Plugger toolPackaged using recycled cardboard header cards and biodegradable bags
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Introducing Dynaplug s most popular plug, suitable for almost all Dynaplug tools, except the road version of the Air system.No need to remove the tyre, no messy glues or solvents, just plug and ride!If a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugsA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationMade with pride in the USA using patented technologyDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
Keep your tubeless tyre repair kit well stocked with Blackburn's Spare Tubeless Plugs. When used in combination with a Blackburn Tubeless Plug Tool these plugs will help you to get back riding in no time at all. Includes 10 plugs.
Want to be covered no matter what happens or just really, really hate walking home The Dynaplug Mega Pill is for all the truly prepared boy and girl scouts out there. The Mega pill is a perfectly machined, waterproof 6061 aluminium capsule that contains everything you need for epic rides in the middle of nowhere, including a grand total of 7 pre-loaded Dynaplug insertion tubes and a micro knife for cutting the plug tail.No need to remove the tyre, no messy glues or solvents, just plug and ride!If a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there!A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationEven as the big boy of the Dynaplug range, the Mega pill is only 65 x 28 mm in size and weighs just 85 grams fully loadedKit includes the tool, 5 x standard and 2 x Megaplug compatible stainless-steel insertion tubes 5 x Soft nose standard plugs, 2 x Megaplugs, 1 x micro knife, a handy carry pouch and a pipe cleaner to help prep the tubes for reloadingMade with pride in the USA with patented technology and warrantied for life under normal usageDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Dynaplug Air Tubeless Road Tyre Repair & Inflation Kit is an all in one tyre repair and reinflation solution, there is no faster way to get yourself back up and rolling.No need to remove the tyre, no messy glues or solvents, just plug and ride!Shorter Road version designed not to bottom out when used on narrower road slicks. For MTB tyres please use our MTB Air with a longer insertion tube to get past thicker MTB treadsA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationCO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, it's also a good idea to give the Air system a try at home before you need to do it 'in the field'Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouchIn addition, there's an air hose for CO2 inflation if you just need to air up through the valve stemMade with pride in the USA using patented technology and warrantied for life under normal usageDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to inflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds. The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The lightest Dynaplug yet, the Racer Ultralight Tyre Repair Kit uses tough glass-reinforced injected nylon construction to get the racer's already low weight down to a barely there 14 grams. Also included is a custom silicon holder, tested for a year in the back country of California and the UK, this lightweight mount fits under your bottle cage and holds your racer securely and rattle-free.Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-rideWhen needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool, depositing the repair plug in the tyre, done!The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tapeNo need to remove the tyre, no messy glues or solvents, just plug and go, go, GO!The double-ended racer holds two preloaded insertion tubes; one with a standard soft nose plug for standard holes and one with an extra-large Megaplug for fixing more serious tyre damageEach is covered by a waterproof CNC'd cap, so the plugs are kept ready to go at a moment's notice, even after being strapped to your bike for monthsWeighs in at just 23 grams! so even the weeniest of weight weenies have no excuses. The 93 mm length is easy to store in a pocket or strapped to a frame for faster accessA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationKit includes the tool itself with both standard and mega plug stainless steel insertion tubes, 2 x Megaplugs and 3 x soft nose standard plugsMade with pride in the USA with patented technology and warrantied for life under normal usage
Storing your bike doesn't have to be difficult, nor cumbersome thanks to the Eurobike Award winning Clug MTB Bike Storage Hook. Compatible with tyres between 1.75-2.25 wide, the Clug MTB is ideal if you want a neat, low-profile bike storage solution.Securely stores your bike in place on the wallInstalls in mere minutesLow-profile and stylish contemporary designAccepts tyres between 1.75-2.25 wideTaking a matter of minutes to install, the Clug MTB is a neat, low-profile storage solution with a stylish, contemporary design. Working in conjunction with the floor, the Clug securely holds your bike in place. When not in use, the Clug takes up minimal space, being barely noticeable on the wall. Designed to work with mountain bikes and tyres between 1.75-2.25 wide, the Clug MTB is perfect for storing your bike in the neatest way possible.
The HUSKE from Seasucker (Hub Standards Keep Evolving) is a universal fork mount system that handles the most common fork mount standards of yesterday, today, and tomorrow. Interchangeable plugs fit into an anodized aluminium extrusion (sold separately) and are moulded from super-durable glass-filled nylon. HUSKE Plugs are sold in pairs.Suitable for all SeaSucker fork-mount racks: Talon, Mini Bomber, Bomber, and Falcon. Moulded; high-strength durable plastic.
The Micro Pro is the classic Dynaplug tool; super compact, weatherproof and beautifully machined. There when you need it, hassle free when you don't. No need to remove the tyre, no messy glues or solvents, just plug and ride!If a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugsA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationMicro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhereKit includes the tool, 2 x stainless steel insertion tubes, 5 x soft nose standard plugs, 1 x micro knife, 1 x air stopper and a pipe cleaner to help prep the tube for reloadingMade with pride in the USA with patented technology and warrantied for life under normal usageThe Micro Pro is a perfectly machined, waterproof 6061 aluminium capsule that contains everything you need for a big day out, including multiple pre-loaded Dynaplug insertion tubes, an air stopper tool for helping to prep the hole for insertion and a micro knife for cutting the plug tail. Despite all this, the Micro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhere.Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Micro Pro is the classic Dynaplug tool; super compact, weatherproof and beautifully machined. There when you need it, hassle free when you don't. No need to remove the tyre, no messy glues or solvents, just plug and ride!If a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugsA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationMicro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhereKit includes the tool, 2 x stainless steel insertion tubes, 5 x soft nose standard plugs, 1 x micro knife, 1 x air stopper and a pipe cleaner to help prep the tube for reloadingMade with pride in the USA with patented technology and warrantied for life under normal usageThe Micro Pro is a perfectly machined, waterproof 6061 aluminium capsule that contains everything you need for a big day out, including multiple pre-loaded Dynaplug insertion tubes, an air stopper tool for helping to prep the hole for insertion and a micro knife for cutting the plug tail. Despite all this, the Micro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhere.Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
A 5-pack of Dynaplug soft nose brass tip repair plugs with a shorter tail for use in the road Air system to get your puncture repaired quickly and easily. Essential for the correct use of the Road air system, the longer tails of standard plugs will block the CO2 vents on the short Road Air system nozzle and prevent proper operationNo need to remove the tyre, no messy glues or solvents, just plug and ride!If a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugsA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationMade with pride in the USA using patented technologyDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.