Lubricating a chain is an essential, but often dreaded task. It can be time-consuming and often results in lubricant landing on the frame, wheels, braking surfaces, and the ground. Thanks to the No Drip Chain Luber every link can now be properly lubricated in seconds, without making a mess or wasting a drop.Complete and clean lubrication of your chain: no drips, no mess, and no missed linksSimply back pedal and gently squeeze the LuberLubricates your chain in seconds with minimum wasteVarious lubricants to suit all weather conditionsThe chain is quick and easy to use - simply fill the No Drip Chain luber with the lubricant of your choice. While back-pedalling, place the applicator head on the chain and squeeze the bottle. A wicking pad in the applicator head will ensure that every link is evenly coated, without lube dripping or flying all over the place. Saves time, saves money; uses 50% less lube each time you lubricate your chain. The No Drip Chain Luber comes with two replacement wicking pads and a child-safety travel cap.
Nano-sized platelets of ceramic Boron Nitride and Advanced fluoropolymers combine with a proprietary binder to ensure optimum adhesion and create a durable ceramic wax coating. Ceramic is naturally white and may cause staining - apply carefully
This superb model meets the most stringent 5.1 specs and is an approved replacement fluid for braking systems requiring DOT 3, 4, and 5.1. Additionally, it features a super low viscosity to yield superior lever response, pad retraction, and consistent performance through a full range of operating temperatures.
This superb model is formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives. Additionally, it is the strongest, longest lasting and most water resistant lubricant available from Finish Line. It goes on wet, and stays wet, to provide maximum drivetrain smoothness, extremely quiet rides, and ultimate rust protection in the harshest of environments.
It features Multi Bike Degreaser, Dry Lube and Super Bike Wash to create a high-speed cleaning system. Clean your frame, handlebars, stem, saddle, and seatpost with Super Bike Wash. This 4oz concentrate makes one litre of their best selling cleaner. It will quickly clean dirt, clay, road grime and chain soils off your bike with little to no scrubbing. The Multi Bike Degreaser allows you to remove all of the grit, grime, and old lubricant from your drivetrain. It features 100% active (no water) biodegradable degreasing solvents, so bike chains and gears are cleaned more quickly and often without a need for a water rinse. Finally, this means you can spend less time cleaning and more time cycling. The Dry Lube allows you to keep all of the moving parts on your ride well lubricated. It's formulated with Teflon Fluoropolymers and goes on wet, but sets up into a dry paste that will not attract grit, grime, or other contaminants. It also features a proprietary quick dry formulation that sets up quickly and holds up to extreme pressures and resists water wash-off.
Over time fork stanchions can become dry and less responsive. This can result in loss of travel, slow rebound, and cause the fork to feel very stiff over bumps. When this happens, this top-quality suspension spray will immediately improve your fork's performance. Additionally, it's made with carefully chosen polysiloxane and advanced fluoropolymers, it's formulated to fight stiction, condition and protect seals, o-rings, and other rubber parts. It improves the surface slip of any stanchion, even ones that are coated. It's perfect for use on your old forks to bring them back to life or to help break in new forks and optimise their performance. As it reduces stiction, forks run more smoothly and quietly. Small bumps are instantly absorbed and response to big hits is noticeably improved.
This straight-forward kit includes a no drip chain luber and a 4oz dry lube bottle. Simply fill the chain luber with lubricant. While back-pedaling, place the applicator head on the chain and squeeze the bottle. A wicking pad in the applicator head will ensure that every link is evenly coated, without lube dripping or flying all over the place. Additionally, this will save you time, money and use 50% less lube each time you lubricate your chain.
This top-notch model flushes out contaminants and old lube and leaves behind a clean new film of low friction lubricant. Additionally, it's designed for cyclists on the go and is the perfect choice for maintaining your bicycle's drivetrain. Finally, It is formulated with rust and corrosion inhibitors that provide ultimate protection in extreme conditions including coastal salt air.
This superb model is formulated specifically for lubricating electric assist drivetrains that are subject to particularly high pressure and torque. Additionally, most mid-drive e-Bike systems will add up to an additional 250 Watts to the rider's input and some performance models can add up to 350 Watts. This consistent, high power means that chains experience much higher rates of wear. While developing this lube, the goal was to create a lubricant that could not only stand up to the high torque associated with electric assist drivetrains, but which also provided long lubrication intervals, would shed dirt, prevent premature wear, and provide superior protection against rust and corrosion. Finally, with a semi-dry formulation and the proprietary blend of high pressure and corrosion inhibiting additives, Finish Line's e-Bike Chain Lube delivers on all fronts.
This stunning model goes on wet and stays wet on the chain. Recommended for long-distance riding and extreme weather conditions. Additionally, if you use it for riding off-road or in dry climates, be sure to wipe the excess from parts; this will help minimise the attraction of dirt and grime. Since 1994, when this lube was first introduced, it has become the preferred lubricant for many professional on and off-road teams world-wide. Use wet lube when you ride hard and long. Proven performance for 100-plus mile rides, muddy off-road conditions, long rainy commutes, and foggy salt-air coastal climates. A heavier, wet-style lubricant that requires a little more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection. Safety, Health and The Environment: Finish Line's WET Lubricant features an Inherently Biodegradable formulation which that between 20% and 60% of the product's base oils will degrade within 28 days once exposed to contact with common soil-borne bacteria. WET Lube is non-toxic when used in quantities and applications as intended and contains no carcinogenic or hazardous air polluting (HAP) ingredients and emits no Volatile Organic Compounds (VOCs). Additionally, WET Lube is REACH compliant for Europe and all ingredients used are listed with all major worldwide chemical inventories and as such this product conforms to all environmental regulations for use as intended. All WET Lube is packaged in either recyclable PET #1 plastic squeeze bottles or recyclable steel cans with no CFCs or ozone depleting propellants used.
Finish Line have combined engineered ceramics with the slipperiest fluoropolymers available, and put it into a base of premium pure 100% synthetic oils. Every time you use Ceramic Wet, it builds a ceramic coating into frictional surfaces that results in increasingly smoother performance. Ceramic coating allows the chain to run extremely clean since dirt does not stick to it easily.